- Ordinateurs mobiles Android 6" avec Wi-Fi 6E, 5G et fonction PPT
- Technologie de bord à bord, Mobile Parcel certifié Zebra Dimensioning
- Processeur octa-core Qualcomm 6490, batterie PowerPrecision+ de 4 400 mAh
- Certifié IP68-/IP65, résistant aux chocs selon MIL-STD-810H
- Prend en charge Zebra Mobility DNA
Product detail sub menu
Description
Description
(mob001040 – 001040)
Mobilis Pack of 10 sleeve for Wearable Wristmount M - Washable
€31.66
€31.66
(mobwristm2 – 001041)
Mobilis Pack of 10 sleeve for Wearable Wristmount L - Washable
€31.66
€31.66
(mobstylus3 – 001054)
€53.33
€53.33
(mob001084 – 001084)
Universal shoulder strap with textile ring, up to 7kg, 90-170cm
€19.99
€19.99
(mob001089 – 001089)
Universal Hypalon D-Rings, 4 peaces
€9.95
€9.95
(mob001360 – 001360)
Fast Wall Charger, EU, 1x USB-A, 10W
€10.83
€10.83
(mob001361 – 001361)
Fast Wall Charger, EU, 1x USB-C, 20W
€12.49
€12.49
(mob001362 – 001362)
Fast Wall Charger, EU, 1x USB-C, 1x USB-A, 30W
€24.99
€24.99
(mob001363 – 001363)
Fast Wall Charger, EU, 1x USB-C, 1x USB-A, 45W
€31.66
€31.66
(mob001364 – 001364)
Fast Wall Charger, EU, 2x USB-C, 1x USB-A, 65W
€39.99
€39.99
Mobilis Câble de connexion, USB
(mob020013 – 020013)
€9.16
€9.16
(mobwristm – 030004)
€27.49
€27.49
(mobrefm – 031002)
€25.83
€25.83
(mobrefguns – 031010)
€27.49
€27.49
(mob031023 – 031023)
Universal Forklift Holster for scanners with gun
€89.99
€89.99
(mob036267 – 036267)
€16.66
€16.66
(brd216367 – 216367)
Passive Holder, compatible with Pistolgrip, fits for: TC53, TC58
€33.61
€33.61
(brd217046 – 217046)
Active Table Stand Cradle, incl. power cord an worldwide adapters, requires rugged boot, fits for: TC53, TC58
€100.83
€100.83
(sytc538pclip – 3PTY-PCLIP-216475)
Charging station, USB-C, incl.: USB-C cable (120mm), order separately: power supply, fits for: TC53/58 with rugged boot
€136.50
€136.50
(ett3pty-ze17 – 3PTY-RAM-HOL-ZE17-2U)
€86.45
€86.45
(brd711306 – 711306)
€42.01
€42.01
(brd711307 – 711307)
€42.01
€42.01
(brd711357 – 711357)
Passive Holder, AMPS, requires: Mobilis case, fits for: TC53, TC58
€42.01
€42.01
(brd712306 – 712306)
€117.64
€117.64
(brd712307 – 712307)
€117.64
€117.64
(brd712357 – 712357)
Active Holder, 12/24V, 2A, AMPS, tilt swivel, cig-plug, requires: Mobilis Case, fits for: TC53, TC58
€117.64
€117.64
(brd713306 – 713306)
€117.64
€117.64
(brd713307 – 713307)
€117.64
€117.64
(brd713357 – 713357)
Active Holder, 12/24V, 2A, AMPS, tilt swivel, fixed installation, requires: Mobilis Case, fits for: TC53, TC58
€117.64
€117.64
(syrfdtc5x-3 – ADP-RFD40-TC5X-2E)
€69.27
€69.27
(sytc5358cup4 – BTRCUP-NGTC5TC7-01)
€159.48
€159.48
(sytc5358bat – BTRY-NGTC5TC7-44MA-01)
€124.92
€124.92
(sytc5358bat10 – BTRY-NGTC5TC7-44MA-10)
€1,226.05
€1,226.05
(sytc5358bat2 – BTRY-NGTC5TC7-44MABLE-01)
€143.21
€143.21
(sytc58batwl – BTRY-NGTC5TC7-44MAWC-01)
€153.51
€153.51
(sytc5358extbat – BTRY-NGTC5TC7-66MA-01)
€177.41
€177.41
(sytc5358crd-5 – CRD-NGTC5-5SE5D)
€1,316.38
Sécurisez les derniers restes de stock dès maintenant !
€1,316.38
(sytc5bcrdkit – CRD-NGTC5B-2SC1B)
Charging station, charges 1 device and 1 spare battery, incl.: power supply, DC and shim, order separately: power cord (c13), fits for: FR55, TC53, TC53e, TC58, TC58e (with protective boot)
€341.17
€341.17
(sytc5358crd3 – CRD-NGTC5N-2SC1B)
€341.17
€341.17
(syntc5x-1 – CRD-NTC5X-1SNHP-01)
Workstation (POS), interfaces: 1x HDMI, 1x Ethernet, 4x USB-A, 1x powered-USB (24V), 2x powered-USB (12V), order separately: power supply, power cord, fits for: TC53, TC58, TC53e, TC58e
€714.35
€714.35
(syntc5x – CRD-NTC5X-1SNWS-01)
Workstation, interfaces: 1x HDMI, 1x Ethernet, 4x USB-A, order separately: power supply, DC cable, power cord, fits for: TC53, TC58, TC53e, TC58e
€607.49
€607.49
(sytc51chg20 – CRD-TC51-20S4BC-01)
€1,960.78
€1,960.78
(sycrdtc58w – CRD-TC58-WCVC-01)
€511.67
€511.67
(sytc58vholder – CRD-TC5NG-NCCD-01)
€139.66
€139.66
(sytc5358crdcup – CRDCUP-NGTC5-01)
€70.78
Cet article sera retiré de la gamme ! Sécurisez les derniers restes de stock dès maintenant !
€70.78
(sytc5358crdcup-5 – CRDCUP-NGTC5-05)
€353.88
Cet article sera retiré de la gamme ! Sécurisez les derniers restes de stock dès maintenant !
€353.88
(sytc5358crdcup-5eth – CRDCUP-NGTC5ETH-05)
€524.68
Cet article sera retiré de la gamme ! Sécurisez les derniers restes de stock dès maintenant !
€524.68
(sytc5xmscrd – CRDON-NGTC5B-5SC4B)
€961.64
€961.64
Station de recharge Zebra, 5 emplacements
(sytcb55crd – CRDON-NGTC5B-5SC5D)
€961.64
€961.64
(sytc5ncrdsc – CRDON-NGTC5N-5SC5D)
€961.64
€961.64
Station de charge et de communication Zebra, 5 emplacements
(sytc5ncrd – CRDON-NGTC5N-5SE5D)
station de chargement et de communication, 5 logements, incl.: cale, à commander séparément : alimentation, câble CC et cordon d'alimentation (C13), compatible avec : FR55, TC53, TC53e, TC58, TC58e (sans coque de protection)
€1,144.20
€1,144.20
(jtbindszt – jtbindszt)
€9.42
€9.42
(sypsu24v – PWR-BGA24V150W1WW)
Power supply, 24V/6.25A DC, fits for: Workstation (POS)
€184.68
€184.68
(ramgdsdock-23 – RAM-GDS-DOCK-V12-ZE2434CPU)
This RAM Mounts GDS holder is suitable for Zebra TC2x & TC5x series with the IntelliSkin protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.
The spring-loaded design holds the device tightly and securely in the cradle and is also charged.
While keeping the Zebra Handheld secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable.
Available space in the back accommodates extended battery packs and the Zebra hand strap.
The back of the device holder is prepared to support a diamond ball base (not included).
Product features RAM Mounts RAM-GDS-DOCK-V12-ZE2434CPU:
Only compatible with the IntelliSkin protective sleeve
Spring-loaded design for easy insertion and removal
Integrated Stylus holder
Charging function
Input Connector: USB-C
Input Cable Length: ca. 100 cm
Additional information:
To use the holder you need the IntelliSkin protective sleeve for the Zebra handheld.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-V12-ZE2434CPU holder is supplied.
€157.10
€157.10
(ramgdsdock-12 – RAM-GDS-DOCKL-V12-ZE2434CPDU)
This RAM Mounts GDS (Key-Locking) holder is suitable for Zebra TC2x & TC5x series with the IntelliSkin protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.
The spring-loaded design holds the device tightly and securely in the cradle and is also charged.
While keeping the Zebra Handheld secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable.
Available space in the back accommodates extended battery packs and the Zebra hand strap.
The back of the device holder is prepared to support a diamond ball base (not included).
Product features RAM Mounts RAM-GDS-DOCKL-V12-ZE2434CPDU:
Only compatible with the IntelliSkin protective sleeve
Spring-loaded design for easy insertion and removal
Integrated Stylus holder
Charging function
Lockable with key
Input Connector: USB-C
Output Connector: USB-A (Peripheral output - 500mAh)
Input Cable Length: ca. 100 cm
Additional information:
To use the holder you need the IntelliSkin protective sleeve for the Zebra handheld.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-V12-ZE2434CPDU holder is supplied.
€283.15
€283.15
(ramgdsdock-13 – RAM-GDS-DOCKL-V12-ZE2434CPU)
This RAM Mounts GDS (Key-Locking) holder is suitable for Zebra TC2x & TC5x series with the IntelliSkin protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.
The spring-loaded design holds the device tightly and securely in the cradle and is also charged.
While keeping the Zebra Handheld secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable.
Available space in the back accommodates extended battery packs and the Zebra hand strap.
The back of the device holder is prepared to support a diamond ball base (not included).
Product features RAM Mounts RAM-GDS-DOCKL-V12-ZE2434CPU:
Only compatible with the IntelliSkin protective sleeve
Spring-loaded design for easy insertion and removal
Integrated Stylus holder
Charging function
Lockable with key
Input Connector: USB-C
Input Cable Length: ca. 100 cm
Additional information:
To use the holder you need the IntelliSkin protective sleeve for the Zebra handheld.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-V12-ZE2434CPU holder is supplied.
€208.36
€208.36
(ramholze171u – RAM-HOL-ZE17-2U)
This RAM Mounts holder is suitable for Zebra TC53 & TC58.
To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.
The spring-loaded design holds the device tightly and securely in the cradle and is also charged via a 5.5mm connector.
The back of the device holder is prepared to support a diamond ball base (not included).
Product features RAM Mounts RAM-HOL-ZE17-2U:
Compatible with the Zebra Handstrap
Spring-loaded design for easy insertion and removal
Integrated Stylus holder
Charging function
Input Connector: 5.5mm DC
Input Cable Length: ca. 125 cm
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE17-2U holder is supplied.
€138.61
€138.61
(ramholze17 – RAM-HOL-ZE17-NP-2U)
This RAM Mounts holder is suitable for Zebra TC53 & TC58 with or without Rugged Boot.
To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.
The spring-loaded design holds the device tightly and securely in the cradle.
The back of the device holder is prepared to support a diamond ball base (not included).
Product features RAM Mounts RAM-HOL-ZE17-NP-2U:
Compatible with the Zebra Handstrap
Spring-loaded design for easy insertion and removal
Integrated Stylus holder
Fits with or without Rugged Boot
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE17-NP-2U holder is supplied.
€101.64
€101.64
(ramholder121 – RAM-HOL-ZE17L-2U)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra TC53 & TC58 with or without Rugged Boot.
To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.
The spring-loaded design holds the device tightly and securely in the cradle and is also charged via a 5.5mm connector.
The back of the device holder is prepared to support a diamond ball base (not included).
Product features RAM Mounts RAM-HOL-ZE17L-2U:
Compatible with the Zebra Handstrap
Spring-loaded design for easy insertion and removal
Integrated Stylus holder
With or without Rugged Boot
Charging function
Lockable with key
Input Connector: 5.5mm DC
Input Cable Length: ca. 125 cm
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE17L-2U holder is supplied.
€165.50
€165.50
(ramholder28 – RAM-HOL-ZE17L-NP-2U)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra TC53 & TC58 with or without Rugged Boot.
To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.
The spring-loaded design holds the device tightly and securely in the cradle.
The back of the device holder is prepared to support a diamond ball base (not included).
Product features RAM Mounts RAM-HOL-ZE17L-NP-2U:
Compatible with the Zebra Handstrap
Spring-loaded design for easy insertion and removal
Integrated Stylus holder
With or without Rugged Boot
Lockable with key
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE17L-NP-2U holder is supplied.
€135.25
€135.25
(ramholder60 – RAM-HOL-ZE24PLU)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra TC22 & TC27 with Rugged Boot.
The holder is powered by a USB-A connector and charges the device in the dock.
To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.
The spring-loaded design holds the device tightly and securely in the cradle.
The back of the device holder is prepared to support a diamond ball base (not included).
Product features RAM Mounts RAM-HOL-ZE24PLU:
Compatible with the Zebra Handstrap
Spring-loaded design for easy insertion and removal
Integrated stylus holder on the side of the dock
Only usable with Rugged Boot
Lockable with Keys
Input Connector: USB-A
Input Cable Length: ca. 125 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE24PLU holder is supplied.
€196.60
€196.60
(sytc5358chg-4 – SAC-NGTC5TC7-4SCHG)
€523.82
€523.82
(sytc5358chgps – SAC-NGTC5TC7-4SCHG-01)
€533.61
€533.61
(sytc5358scprot – SG-NGTC5-SCRNP-03)
€61.93
€61.93
(sytc5358scprot450 – SG-NGTC5-SCRNP-450)
€9,118.15
€9,118.15
(sytc5xwrist3 – SG-NGTC5-WMADP1-01)
€243.15
€243.15
(sytc5xwrist4 – SG-NGTC5-WMADP1-02)
€243.15
€243.15
(sytc5358boot – SG-NGTC5EXO1-01)
€61.93
€61.93
(sytc5358bootred – SG-NGTC5EXORED1-01)
Rugged Boot, color: Red/Black, requires: Trigger Handle and RFID sled, fits for: TC53, 58
€60.06
€60.06
(sytc5tc7hstrap – SG-NGTC5TC7-HDSTP-01)
€32.07
€32.07
(sytc5358hstrap – SG-NGTC5TC7-HDSTP-03)
€96.22
€96.22
(sytc5358sholst – SG-NGTC5TC7-HLSTR-01)
€110.23
€110.23
(sytc57sty-3 – SG-TC5NGTC7NG-TETHR-03)
€31.50
€31.50
(stageit-l – Stageit-l)
Contact us and book our Staging Premium Service
€60.00
€60.00
(stageit-m – Stageit-m)
Contact us and book our Staging Premium Service
€30.00
€30.00
(stageit-s – Stageit-s)
Contact us and book our Staging Premium Service
€10.00
€10.00
(stageit-xl – Stageit-xl)
Contact us and book our Staging Premium Service
€240.00
€240.00
(sytc5358trg – TRG-NGTC5-ELEC-01)
€313.87
€313.87
(syaepd20-3c0 – Z1AE-PD20XX-3C00)
Service OneCare Essential, Comprehensive, 3 Days TAT, purchased within 30 days, fits for: PD20
€342.55
€342.55
(syaetc53xx-3c – Z1AE-TC53XX-3C00)
€416.82
€416.82
(syaetc53xx-5c – Z1AE-TC53XX-5C00)
Service Contract, Comprehensive, 5 Years, 3 days TAT, purchased within 30 days, fits for: TC53
€680.80
€680.80
(syaetc58xx-31 – Z1AE-TC58XX-3100)
€570.09
€570.09
(syaetc58xx-3c – Z1AE-TC58XX-3C00)
€416.82
€416.82
(syaetc58xx-5c – Z1AE-TC58XX-5C00)
OneCare Essential Service, Comprehensive Coverage, 5 years, 3 days TAT, purchased within 30 days, fits for: TC58
€680.80
€680.80
(syaetc58xx-5c03 – Z1AE-TC58XX-5C03)
Zebra OneCare Essential, 5 years, purchased within 30 days, with comprehensive coverage, std commissioning, fits for: TC58
€812.75
€812.75
(syb5emh250-10 – Z1B5-EMH250-1000)
Zebra OneCare technical and software support (TSS), term: 1 year, incl.: phone support, software maintenance, price per device
€37.14
€37.14
Fiche technique & plus
* La réduction s'applique au prix de vente initial.