Robust and versatile business tablets
Robust and versatile business tablets
€1,593.41
(recommended retail price)- Tablet with Android (support up to Android 16) or Windows (ET60W/ET65W)
- 10.1" WUXGA display with 1,000 nits
- Qualcomm 6490 octa-core 2.7 GHz, 8 GB RAM, 128 GB Flash, Wi-Fi 6E & NFC; ET65: 5G, GPS
- IP66 certified, MIL-STD-810H
- Hot-swappable 8,920 mAh battery, optional 17,840 mAh battery
Description
Description
The ET60/ET65 tablets are the perfect partners for business! The tablets can be integrated into forklifts and other charging machines via a vehicle dock and can be used in cold rooms and outdoor areas with extreme sub-zero temperatures. The display and optional keyboard are heated in the vehicle dock. If a laptop is needed at work, your customers simply plug in the optional keyboard with friction hinge and turn the ET60/ET65 into a laptop.
ET60/ET65 are IP66-certified and very robust: they withstand drops onto concrete, are dust-proof and immune to corrosion. They are as unaffected by freezing cold and scorching heat as they are by snow, ice and rain. If they get dirty, they can be hosed down with a water hose. The 10.1" display, which is 1,000 nits bright, and the optical scan window are also robust and protected by shatterproof and scratchproof Corning Gorilla Glass. The outstanding performance of both tablets is guaranteed by the Qualcomm 6490 Octa-Core processor platform with 2.7 GHz. It supports the fastest networks, artificial intelligence (AI) and machine learning. In addition, the tablets have Wi-Fi 6E and NFC, the ET65 also has 5G, GPS. The integrated camera can be used for occasional scanning. The SE55 scan module is available as an option. It captures 1D/2D barcodes in virtually any condition in close proximity and up to 14 m away.
The ET60/ET65 tablets are equipped with an 8,920 mAh hot-swap battery. A more powerful 17,840 mAh battery is available as an option, as well as a battery-less option for vehicle mounting.
(zet60-3 – ET60AW-0SQAGS00A0-A6)
€1,640.28
€1,640.28
(zet65 – ET65AW-ESQAGS00A0-A6)
€1,827.74
€1,827.74
(zet60 – ET60AW-0HQAGN00A0-A6)
€1,968.33
€1,968.33
(zet60-2 – ET60AW-0SQAGN00A0-A6)
€1,593.41
€1,593.41
(zet60-4 – ET60AW-0SQAGSK0A0-A6)
€1,780.87
€1,780.87
(zet60-5 – ET60AW-0SQAGSK0C0-A6)
€1,827.74
€1,827.74
(zet60-6 – ET60WW-0S5BLS00A0-00)
€2,639.00
€2,639.00
(zet60-14 – ET60WW-0S5DLSK0A1-00)
€3,048.50
€3,048.50
(zet60-7 – ET60WW-0S5DPS00A0-00)
€2,912.00
€2,912.00
(zet60-8 – ET60WW-0S5DPSK0A0-00)
€3,185.00
€3,185.00
(zet60-9 – ET60WW-0S6CLS00A0-00)
€3,094.00
€3,094.00
(zet60-10 – ET60WW-0S6DPS00A0-00)
€3,276.00
€3,276.00
(zet60-11 – ET60WW-0S6DPS00A1-00)
€3,412.50
€3,412.50
(zet60-12 – ET60WW-0S7EPSJ0A0-00)
€3,549.00
€3,549.00
(zet60-13 – ET60WW-0S8EPEJ0A0-00)
€4,004.00
€4,004.00
(zet65-3 – ET65AW-ESQAGE00A0-A6)
€1,874.60
€1,874.60
(zet65-2 – ET65AW-ESQAGSK0A0-A6)
€1,968.33
€1,968.33
(zet65-5 – ET65AW-ESQAGSK0C0-A6)
€1,968.33
€1,968.33
(zet65-7 – ET65WW-ES5BLS00A0-00)
€3,003.00
€3,003.00
(zet65-8 – ET65WW-ES5DPE00A0-00)
€3,458.00
€3,458.00
(zet65-9 – ET65WW-ES5DPS00A0-00)
€3,367.00
€3,367.00
(zet65-10 – ET65WW-ES5DPSK0A0-00)
€3,640.00
€3,640.00
(zet65-11 – ET65WW-ES6DPS00A0-00)
€3,731.00
€3,731.00
(zet65-12 – ET65WW-ES7EPSJ0A0-00)
€4,004.00
€4,004.00
(zet65-13 – ET65WW-ES7EPSL0A0-00)
€4,186.00
€4,186.00
(zet65-14 – ET65WW-ES8EPEJ0A0-00)
€4,459.00
€4,459.00
(ramholze25pu – RAM-HOL-ZE25PU)
This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE25PU:
Compatible with Zebra Keyboard
Easy insertion and removal
With Latch
Additional mounting plate for attaching additional devices or accessories
Usable with RAM Vent-Temp, Temp Right, NFC-Repeater or Zebra CAC Reader
Input Connector: 5.5mm DC
Input Voltage: 12V
Input Cable Length: ca. 100 cm
Certifications: RoHS, IC, FCC, WEEE, CE & UKCA
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE25PU holder is supplied.
€200.41
€200.41
(mob036336 – 036336)
Screen Protector, Anti-Shock IK06, clear, fits for: ET60, ET65 (10")
€32.49
€32.49
(brd216406 – 216406)
Hard-Wired Power Supply, Dual USB Type-A and Type-C Female ports Qualcomm Quick Charge 3.0, 5V/2.4A. 2 pin Molex port, with Molex 2 Pin cable and USB Type-C to USB Type-C cable
€54.61
€54.61
(brd216466 – 216466)
Active Holder, spring lock, USB-C 3.1, AMPS, VESA 75, order separately: charging solution, fits for: ET60, ET65 (Android)
€142.85
€142.85
(brd216467 – 216467)
Active Holder, lockable, USB-C 3.1, AMPS, VESA 75, order separately: charging solution, fits for: ET60, ET65 (Android)
€159.66
€159.66
(brd216498 – 216498)
Passive Holder, AMPS, VESA 75, color: black, fits for: ET60, ET65
€42.01
€42.01
(brd216499 – 216499)
Spring-Lock, acetal plastic, color: black, compatible with ET60/ET65 Brodit Holder
€33.61
€33.61
(brd216500 – 216500)
Locking Block with 2 keys, compatible with ET60/ET65 Brodit Holder
€42.01
€42.01
(brd217107 – 217107)
Holder, Key-Lock, USB-C 3.1, AMPS, VESA 75, order separately: Power Supply, for devices with standard or extended battery, fits for: ET60, ET65 Windows
€159.66
€159.66
(brd217108 – 217108)
Holder, Spring-Lock, USB-C 3.1, AMPS, VESA 75, order separately: Power Supply, for devices with standard and extended battery, fits for: ET60, ET65 Windows
€159.66
€159.66
(brd217140 – 217140)
Table stand contains five Brodit slide-in mounts, fits for: ET60/ET65
€605.03
€605.03
(sydockg2 – 300039)
€19.75
€19.75
(zpwri – 450020)
AC power supply for cradles, 14V, 100-240mAh, 5,5x 2,5mm barrel jack connector, order separately: power cord, fits for: ET8X, L10, BC, B10, D10, ET65
€77.83
€77.83
(zdcpow – 450083)
€250.91
€250.91
(zdcpow2 – 450084)
€326.41
This article has been removed from range!
€326.41
(zcabadap – 450143)
€26.72
€26.72
(brd945031 – 945031)
Cig-Plug Adapter, USB-A and USB-C interface, Quick Charger 3.0, 5V, 2.4A, incl.: USB-C to USB-C cable
€33.61
€33.61
(brd945084 – 945084)
Wall Adapter, USB-C and USB-A Interface, Input: 220V, Output: 5V, 3A, Quick Charge, incl.: USB-C to USB-C cable
€46.21
€46.21
(zet6xbat – BTRY-ET6X-0AH-01)
Battery Eliminator, no Cell Battery, fits for: ET6X (Android)
€89.65
€89.65
(zet6xbate – BTRY-ET6XA-18AH-01)
Spare battery, extended, 17.840mAh, fits for: ET6X (Android)
€217.04
€217.04
(zet6xbats – BTRY-ET6XA-9AH-01)
Standard Battery, 8920mAh, fits for: ET6X (Android)
€122.68
€122.68
(syet6xwbat-0ah – BTRY-ET6XW-0AH-01)
Battery Eliminator, no Cell Battery, fits for: ET6X (Windows)
€89.65
€89.65
(zet6xbatw – BTRY-ET6XW-5AH-01)
Spare battery, 4460 mAh, fits for: ET6X (Windows)
€118.30
€118.30
(syet6xwbat – BTRY-ET6XW-9AH-01)
Spare battery, extended, 8920 mAh, fits for: ET6X (Windows)
€209.30
€209.30
(zet6pwadpdc – CBL-ET6-ADPA2-1)
DC Power Adapter Cable from DC/DC Power Supply PS1370 to ET6 Vehicle Dock
€103.80
€103.80
(zet60dock – CRD-ET6X-VEHDK-CON-01)
Vehicle dock, IP66, interfaces: 2x USB-A (2.0), 1x RS232, drilling: VESA 100 x 100 / VESA 75 x 75, incl.: screws, lock and two keys, order separately: vehicle power supply, fits for: ET60/65
€839.87
€839.87
(zet60dock2 – CRD-ET6X-VEHDK-PTA-01)
Vehicle dock, 2x USB-A, RS232, with RF pass through antennas, order separately: power supply, external antennas, fits for: ET6x
€934.23
€934.23
(jtbindszt – jtbindszt)
Android Zero Touch Registration License for one device
€9.42
€9.42
(syet60keytray – KT-KYBDTRAY-ET6X-01)
Keyboard support bracket, Keyboard VESA: 75x75, AMPS, cradle VESA: 100 x 100, 75 x 75, fits for: ET60, ET65 vehicle cradles
€169.86
€169.86
(zet6xkeyde – KYB-ET6X-2IN1-DE1-01)
2-in-1 attachable rugged Keyboard, layout: DE, 78 keys, with multi-color dimmable backlight, fits for: ET60, ET65
€839.87
€839.87
(zet6xkeyes – KYB-ET6X-2IN1-ES1-01)
2-in-1 attachable rugged Keyboard, layout: ES, 78 keys, with multi-color dimmable backlight, fits for: ET60, ET65
€839.87
€839.87
(zet6xkeyfr – KYB-ET6X-2IN1-FR1-01)
2-in-1 attachable rugged Keyboard, layout: FR, 78 keys, with multi-color dimmable backlight, fits for: ET60, ET65
€839.87
€839.87
(zet6xkeyuk – KYB-ET6X-2IN1-UK1-01)
2-in-1 attachable rugged Keyboard, layout: UK, 78 keys, with multi-color dimmable backlight, fits for: ET60, ET65
€839.87
€839.87
(syets1key – KYBD-QW-ET-S-1)
Keyboard, layout: QWERTY, with USB-A Cable
€609.70
€609.70
(syps1370 – PS1370)
External Voltage Pre-Regulator (19-90V), 15 VDC out, 90 W
€564.54
€564.54
(zet80ps-2 – PWR-BGA15V45W-UC2-WW)
Zebra Power Supply, USB-C, 15V, 3A, 45W, order separately: Power Cord (C5), fits for: ET60, ET65, ET80, ET85
€51.72
€51.72
(ramholder75 – RAM-HOL-ZE25LU)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablet with or without Zebra Keyboard.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE25LU:
Compatible with Zebra Keyboard
Easy insertion and removal
Lockable with key
Additional mounting plate for attaching additional devices or accessories
Usable with RAM Vent-Temp, Temp Right, NFC-Repeater or Zebra CAC Reader
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE25LU holder is supplied.
€175.85
€175.85
(ramdocket6065 – RAM-HOL-ZE25PD2HLU)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE25PD2HLU:
Compatible with Zebra Keyboard
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Usable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC Reader
Heated Pogo-Pins
Lockable with key
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh)
Transfer Speed: 12Mbps
Input Voltage: 12V
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 25 cm
Certifications: RoHS, IC, FCC, WEEE, CE & UKCA
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE25PD2HLU holder is supplied.
€354.19
€354.19
(ramholder68 – RAM-HOL-ZE25PD2HU)
This RAM Mounts Form-Fit holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE25PD2HU:
Compatible with Zebra Keyboard
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Usable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC Reader
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh)
Transfer Speed: 12Mbps
Input Voltage: 12V
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 25 cm
Certifications: RoHS, IC, FCC, WEEE, CE & UKCA
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE25PD2HU holder is supplied.
€325.84
€325.84
(ramholder30 – RAM-HOL-ZE25PD2LU)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in Dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE25PD2LU:
Compatible with Zebra Keyboard
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Usable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC Reader
Lockable with key
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh)
Transfer Speed: 12Mbps
Input Voltage: 12V
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 25 cm
Certifications: RoHS, IC, FCC, WEEE, CE & UKCA
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE25PD2LU holder is supplied.
€292.13
€292.13
(ramholder93 – RAM-HOL-ZE25PD2U)
This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE25PD2U:
Compatible with Zebra Keyboard
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Usable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC Reader
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Voltage: 12V
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 25 cm
Certifications: RoHS, IC, FCC, WEEE, CE & UKCA
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE25PD2U holder is supplied.
€261.94
€261.94
(ramholder100 – RAM-HOL-ZE25PDHLU)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE25PDHLU:
Compatible with Zebra Keyboard
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Usable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC Reader
Heated Pogo-Pins
Lockable with key
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Voltage: 12V
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 25 cm
Certifications: RoHS, IC, FCC, WEEE, CE & UKCA
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE25PDHLU holder is supplied.
€348.75
€348.75
(ramholder45 – RAM-HOL-ZE25PDHU)
This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE25PDHU:
Compatible with Zebra Keyboard
Easy insertion and removal
With Latch
Additional mounting plate for attaching additional devices or accessories
Usable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC Reader
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Voltage: 12V
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 25 cm
Certifications: RoHS, IC, FCC, WEEE, CE & UKCA
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE25PDHU holder is supplied.
€320.52
€320.52
(ramholder36 – RAM-HOL-ZE25PDLU)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE25PDLU:
Compatible with Zebra Keyboard
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Usable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC Reader
Lockable with key
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Voltage: 12V
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 25 cm
Certifications: RoHS, IC, FCC, WEEE, CE & UKCA
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE25PDLU holder is supplied.
€280.73
€280.73
(ramholder37 – RAM-HOL-ZE25PDU)
This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE25PDU:
Compatible with Zebra Keyboard
Easy insertion and removal
With Latch
Additional mounting plate for attaching additional devices or accessories
Usable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC Reader
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Voltage: 12V
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 25 cm
Certifications: RoHS, IC, FCC, WEEE, CE & UKCA
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE25PDU holder is supplied.
€248.73
€248.73
(ramholder101 – RAM-HOL-ZE25PHLU)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE25PHLU:
Compatible with Zebra Keyboard
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Usable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC Reader
Heated Pogo-Pins
Lockable with key
Input Connector: 5.5mm DC
Input Voltage: 12V
Input Cable Length: ca. 100 cm
Certifications: RoHS, IC, FCC, WEEE, CE & UKCA
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE25PHLU holder is supplied.
€266.25
€266.25
(ramholze25 – RAM-HOL-ZE25PHU)
This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE25PHU:
Compatible with Zebra Keyboard
Easy insertion and removal
With Latch
Additional mounting plate for attaching additional devices or accessories
Usable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC Reader
Heated Pogo-Pins
Input Connector: 5.5mm DC
Input Voltage: 12V
Input Cable Length: ca. 100 cm
Certifications: RoHS, IC, FCC, WEEE, CE & UKCA
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE25PHU holder is supplied.
€237.98
€237.98
(ramholder73 – RAM-HOL-ZE25PLU)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE25PLU:
Compatible with Zebra Keyboard
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Usable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC Reader
Lockable with key
Input Connector: 5.5mm DC
Input Voltage: 12V
Input Cable Length: ca. 100 cm
Certifications: RoHS, IC, FCC, WEEE, CE & UKCA
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE25PLU holder is supplied.
€227.96
€227.96
(ramholze25u – RAM-HOL-ZE25U)
This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 & ET65 Tablet with or without Zebra Keyboard.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE25U:
Compatible with Zebra Keyboard
Easy insertion and removal
With Latch
Additional mounting plate for attaching additional devices or accessories
Usable with RAM Vent-Temp, Temp Right, NFC-Repeater or Zebra CAC Reader
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE25U holder is supplied.
€148.08
€148.08
(syet6xchg – SAC-ET6X-2SCHG-01)
2-Slot Battery Charger, order separately: Power Supply, AC and DC Cable, fits for: ET6X
€217.04
€217.04
(syet6xdclip – SG-ET6X-DCLIPS-01)
D-clips, fits for: soft handle, shoulder strap
€61.34
€61.34
(zet80handle – SG-ET8X-HANDLE1-01)
€62.96
€62.96
(zet80sph – SG-ET8X-PENLOOP1-01)
€20.38
€20.38
(zet80sstrap – SG-ET8X-SHLDR1-01)
€47.51
€47.51
(zet80stlyus – SG-ET8X-STYLUS1-01)
Stylus, long, order separately: tether, fits for: L10ax
€118.79
€118.79
(sytc51pstyl – SG-STYLUS-TCX-MTL-03)
Stylus, pac of 3, fiber tip, fits for: MC22, MC27, TC21, TC26, TC22, TC27, TC52x, TC52ax, TC73, TC78, ET60, ET65
€28.82
€28.82
(sytc57sty-3 – SG-TC5NGTC7NG-TETHR-03)
€31.50
€31.50
(sytc70stylus – SG-TC7X-STYLUS-03)
Stylus, incl.: coiled tether, pack of 3, fits for: TC51, TC56, TC7X, TC8000, MC3300, ET51/56 (Android), ET50/55 (Android), MC9300.
€54.05
€54.05
(stageit-l – Stageit-l)
Contact us and book our Staging Premium Service
€60.00
€60.00
(stageit-m – Stageit-m)
Contact us and book our Staging Premium Service
€30.00
€30.00
(stageit-s – Stageit-s)
Contact us and book our Staging Premium Service
€10.00
€10.00
(stageit-xl – Stageit-xl)
Contact us and book our Staging Premium Service
€240.00
€240.00
(zet6xstand – XBK-ET6X-KCKSTD-01)
Kickstand with Rotating Hand Strap, Hand Strap is adjustable and rotatable, compatible with standard and extended battery, fits for: ET60, ET65
€160.42
€160.42
(syaeet6xxw-3c – Z1AE-ET6XXW-3C00)
Service OneCare Essential, comprehensive, 3 day TAT, purchased in 30 days, 3 years, fits for: ET60, ET65 (Windows)
€407.80
€407.80
(syaeet6xxw-5c – Z1AE-ET6XXW-5C00)
Service OneCare Essential, comprehensive, 3 day TAT, purchased in 30 days, 5 years, fits for: ET60, ET65 (Windows)
€679.66
€679.66
(syaeet6xxx-3c – Z1AE-ET6XXX-3C00)
Service OneCare Essential, comprehensive, 3 day TAT, purchased in 30 days, 3 years, fits for: ET60, ET65
€280.02
€280.02
(syaeet6xxx-35 – Z1AE-ET6XXX-5700)
Service One Care Essential, 5 years, 3 days TAT, purchased within 30 days, with comprehensive coverage, proactive battery replacement for battery in use, fits for: ET6xxx
€692.10
€692.10
(syaeet6xxx-5c – Z1AE-ET6XXX-5C00)
Service OneCare Essential, comprehensive, 3 day TAT, purchased in 30 days, 5 years, fits for: ET60, ET65 (Android)
€466.70
€466.70
Data sheet & more
* The discount refers to the original sales price.