Reliable, long-lasting tablets for every work environment
€1,187.79
(recommended retail price)- Robust enterprise tablets for office and field staff
- Available with a 8.4'' or 10.1'' multi-touch display with Gorilla Glass
- Intel quad-core processor and 4 GB RAM
- Reliable connectivity: WLAN, GPS, Bluetooth, LTE (ET56)
- Operating system: Android
Product detail sub menu
Description
Description
The Zebra ET51/ET56 tablets combine the chic appearance of a consumer device with the necessary reliability of an enterprise tablet, and bridge the gap between the short-lived end consumer segment and the highly durable tablet area in the high price segment. With numerous expansion options, the elegant enterprise tablets cover a large working environment – perfect for use in the fields of transportation and logistics, field service not to mention in retail stores.
Both the compact 8.4'' and the 10.1'' display are readable in nearly any lighting conditions and also seamlessly react when wet or when the user is wearing gloves. The impact-resistant, scratch-proof Corning Gorilla Glass protects the tablets’ most sensitive components. The ET51/ET56 is IP65-certified against dust and jet water. Plus, it withstands impacts and shocks, making it practical for usage in a vehicle (from a forklift in the warehouse up to delivery trucks on the road).
For good native wireless communication the tablets convince with reliable wireless support (802.11ac/r/k/v), GPS and Bluetooth 4.2. For use in the field the ET56 offers full WWAN connectivity with a high data rate in the LTE standard. The rapid Apollo Lake quad-core processor with 1.6 GHz and 4 GB of DDR4 RAM thereby processes large amounts of data at a high speed. Another advantage: the processor minimises energy consumption and increases the life cycle of the battery.
On the rear of the tablets there is a practical 8 megapixel colour camera. Via the 2 megapixel front camera it is possible to video conference via WLAN or mobile networks. This way, users are ensured immediate help and support from external experts, colleagues or bosses. With the expansion module with a scan engine, they capture nearly every 1D or 2D barcode, no matter what condition it is in - damaged, dirty or poorly printed.
The tablets are also optionally available with Android. In these versions, they feature a higher resolution, a 13 megapixel colour camera on the back and a built-in 5 megapixel front camera. A Qualcomm Snapdragon 660 Octa-core processor with 2.2 GHz and 32 GB of flash memory process large amounts of data at high speed, while the powerful 6,440 mAh lithium polymer battery ensures long operating times. The interfaces include Bluetooth 5.0, WLAN (802.11 ac) and a USB-C interface. The 10.1" version also offers 2x2 MIMO, 4G LTE, as well as GPS, GLONASS, Galileo and Beidou support. The 8" version, on the other hand, is available with an integrated barcode scanner, as needed. Thanks to PRZM technology, it even captures damaged or dirty 1D/2D barcodes reliably and quickly.
As needed, the Android version is also available as an 8'' variant with an integrated barcode scanner. Thanks to PRZM technology, it even captures damaged or dirty 1D/2D barcodes reliably and quickly.
With the versatile accessories they expand not only the tablet itself, but also the application areas of the ET51/ET56. The Android versions are also supported by Zebra Mobility DNA.
(syet51-2 – ET51AT-W12E)
€1,391.17
This article will be removed from range! Secure the last remainders of stock now!
€1,391.17
(syet51-23 – ET51CT-G21E-00A6)
€1,187.79
This article will be removed from range! Secure the last remainders of stock now!
€1,187.79
(syet51 – ET51AE-W12E)
€1,254.84
This article will be removed from range! Secure the last remainders of stock now!
€1,254.84
(syet51kitand-uk – KIT-ET51CE-RTL-00-GB)
€1,227.90
This article will be removed from range! Secure the last remainders of stock now!
€1,227.90
(syet56kitand – KIT-ET56CE-FLD-00-EU)
€1,473.49
This article will be removed from range! Secure the last remainders of stock now!
€1,473.49
Accessories
(sytc51ps – PWR-WUA5V12W0EU)
€31.63
€31.63
(mobcabbag – 001278)
€9.16
This article will be removed from range! Secure the last remainders of stock now!
€9.16
(mobholster – 031014)
€25.83
€25.83
(mob036174 – 036174)
€31.66
€31.66
(mob053011 – 053011)
€47.49
€47.49
(mob067005 – 067005)
€47.49
€47.49
(brd216230 – 216230)
Charging Module with USB-A Host and DC connector 5,5x5,1-1,5mm for Module Upgrade holders, no cables included, fits for: ET50, ET51, ET55, ET56
€159.66
€159.66
(brd216240 – 216240)
€138.65
€138.65
(brd216250 – 216250)
€16.80
€16.80
(brd216251 – 216251)
€16.80
€16.80
(brd216258 – 216258)
€84.03
€84.03
(symc9500cabu – 25-124330-01R)
€12.02
€12.02
(symc40ucab – 25-MCXUSB-01R)
€18.03
This article has been removed from range!
€18.03
(syacabit – 50-16000-671R)
€18.03
€18.03
(brd510892 – 510892)
€302.51
€302.51
(systrap – 58-40000-007R)
€17.14
€17.14
(brd736267 – 736267)
€327.72
€327.72
(brd739266 – 739266)
€176.46
€176.46
(brd739267 – 739267)
€176.46
€176.46
(brd741266 – 741266)
€168.06
€168.06
(brd747267 – 747267)
€310.92
€310.92
(sytc8000mount – BRKT-SCRD-SMRK-01)
€185.36
€185.36
(syet5xbat10-3 – BTRY-ET5X-10IN3-02)
Spare battery, 4950 mAh, internal battery, fits for: ET51/ET56 (10 inch, Windows)
€117.16
€117.16
(syet51exbat – BTRY-ET5X-10IN5-01)
€152.56
€152.56
(syet5x – BTRY-ET5X-8IN3-01)
€132.14
€132.14
(syet5xbatp8 – BTRY-ET5X-8IN5-01)
€134.54
€134.54
(syet50bat2 – BTRY-ET5X-PRPK2-01)
PowerPack battery, order separately: expansion module, fits for: ET5X, ET4X
€258.27
€258.27
(sycabr71 – CBA-R71-C09ZAR)
€84.04
€84.04
(sycabrf2 – CBA-RF2-C09ZAR)
€64.66
€64.66
(sycabu09 – CBA-U09-C15ZAR)
€96.98
€96.98
(sycabu12 – CBA-U12-C09ZAR)
€34.47
€34.47
(sycabuf6 – CBA-UF6-C12ZAR)
Connection cable, USB, shielded, freezer, length: 3.65 m, coiled
€96.98
€96.98
(sydc-8 – CBL-DC-381A1-01)
€31.24
€31.24
(sydc-7 – CBL-DC-382A1-01)
€31.24
€31.24
(synt1250cab – CBL-DC-388A1-01)
€10.80
€10.80
(syruchco – CHG-ET5X-CBL2-01)
€107.99
This article will be removed from range! Secure the last remainders of stock now!
€107.99
(syadapt-eu – CN-000803-05)
€10.46
€10.46
(syadapt-uk – CN-000803-06)
€10.46
€10.46
(syet5xslot – CRD-ET5X-1SCG2)
€236.17
€236.17
(sysldockad – CRD-ET5X-1SCOM2R)
€774.82
This article will be removed from range! Secure the last remainders of stock now!
€774.82
(syet5xcha – CRD-ET5X-SE4CO2-01)
€645.22
This article will be removed from range! Secure the last remainders of stock now!
€645.22
(syet5xcha-2 – CRD-ET5X-SE4CO3-01)
€778.23
€778.23
(jtbindszt – jtbindszt)
Android Zero Touch Registration License for one device
€9.42
€9.42
(synt1250wkit – KIT-PWR-12V50W)
€69.68
€69.68
(ettqln320ucab – P1031365-055)
€28.93
€28.93
(ettzq51dc – P1063406-030)
€52.63
€52.63
(ettzq51dc2 – P1063406-031)
€52.63
€52.63
(synt12108w – PWR-BGA12V108W0WW)
€126.13
€126.13
(synt1250w – PWR-BGA12V50W0WW)
€58.85
€58.85
(sytc51ps-uk – PWR-WUA5V12W0GB)
Power supply, 5 VDC, 2.5 A, incl.: plug (UK), order separately: connection cable (USB-A), fits for: MC22, MC27
€31.63
€31.63
(sypsaw – PWR-WUA5V6W0WW)
€20.44
€20.44
(ramholder74 – RAM-HOL-ZE10CLU)
This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with rugged boot.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE10CLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10CLU holder is supplied.
€92.50
€92.50
(ramholder76 – RAM-HOL-ZE10KLU)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE10KLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with keys
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10KLU holder is supplied.
€110.33
€110.33
(ramholder53 – RAM-HOL-ZE10PCLU)
This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE10PCLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Input Connector: 5.5 mm DC
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PCLU holder is supplied.
€136.21
€136.21
(ramholder22 – RAM-HOL-ZE10PD2CLU)
This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE10PD2CLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PD2CLU holder is supplied.
€169.50
€169.50
(ramholder102 – RAM-HOL-ZE10PD2KLU)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE10PD2KLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with key
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PD2KLU holder is supplied.
€181.83
€181.83
(ramholder23 – RAM-HOL-ZE10PD2U)
This RAM Mounts holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE10PD2U:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PD2U holder is supplied.
€146.09
€146.09
(ramholder85 – RAM-HOL-ZE10PDCLU)
This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE10PDCLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Input Connector: 5.5 mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PDCLU holder is supplied.
€155.69
€155.69
(ramholder77 – RAM-HOL-ZE10PDKLU)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE10PDKLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with key
Input Connector: 5.5 mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PDKLU holder is supplied.
€167.04
€167.04
(ramholder62 – RAM-HOL-ZE10PDU)
This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with rugged case.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE10PDU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
With Latch
Prepared for mounting additional devices such as handhelds
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PDU holder is supplied.
€135.90
€135.90
(ramholder58 – RAM-HOL-ZE10PKLU)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE10PKLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with key
Input Connector: 5.5mm DC
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PKLU holder is supplied.
€147.49
€147.49
(ramholder4 – RAM-HOL-ZE10PU)
This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Case.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE10PU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
With Latch
Prepared for mounting additional devices such as handhelds
Input Connector: 5.5mm DC
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PU holder is supplied.
€115.02
€115.02
(ramholder109 – RAM-HOL-ZE10U)
This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with rugged boot.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE10U:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
With Latch
Additional mounting plate for attaching additional devices or accessories
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10U holder is supplied.
€72.13
€72.13
(ramholder86 – RAM-HOL-ZE11CLU)
This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 10.1“ Series with rugged boot.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE11CLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11CLU holder is supplied.
€94.93
€94.93
(ramholder78 – RAM-HOL-ZE11KLU)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 10.1“ Series with rugged boot.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE11KLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with keys
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11KLU holder is supplied.
€114.36
€114.36
(ramholder34 – RAM-HOL-ZE11PCLU)
This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE11PCLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Input Connector: 5.5mm DC
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PCLU holder is supplied.
€148.77
€148.77
(ramholder24 – RAM-HOL-ZE11PD2CLU)
This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE11PD2CLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PD2CLU holder is supplied.
€179.92
€179.92
(ramholder6 – RAM-HOL-ZE11PD2KLU)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE11PD2KLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with key
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PD2KLU holder is supplied.
€193.56
€193.56
(ramholder5 – RAM-HOL-ZE11PD2U)
This RAM Mounts holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE11PD2U:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PD2U holder is supplied.
€156.42
€156.42
(ramholder35 – RAM-HOL-ZE11PDCLU)
This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE11PDCLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PDCLU holder is supplied.
€165.90
€165.90
(ramholder3 – RAM-HOL-ZE11PDKLU)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE11PDKLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with key
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PDKLU holder is supplied.
€181.61
€181.61
(ramholder112 – RAM-HOL-ZE11PDU)
This RAM Mounts holder is suitable for Zebra ET5x 10.1“ Series with rugged boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE11PDU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Input Connector: 5.5mm DC-Connector
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PDU holder is supplied.
€145.99
€145.99
(ramholder49 – RAM-HOL-ZE11PKLU)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE11PKLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with key
Input Connector: 5.5mm DC
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PKLU holder is supplied.
€157.33
€157.33
(ramholder25 – RAM-HOL-ZE11PU)
This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET5x 10.1“ with rugged boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE11PU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
With Latch
Prepared for mounting additional devices such as handhelds
Input Connector: 5.5mm DC-Connector
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PU holder is supplied.
€121.43
€121.43
(ramholze11 – RAM-HOL-ZE11U)
This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET5x 10.1“.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE11U:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
With Latch
Prepared for mounting additional devices such as handhelds
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11U holder is supplied.
€81.67
€81.67
(ramet4t-2 – RAM-HOL-ZE21PD2U)
This RAM Mounts EZ-Roll‘r holder is suitable for Zebra ET40 & ET45 10“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE21PD2U:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional informations:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE21U.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCK-ZE21PD2U.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE21PD2U holder is supplied.
€136.45
€136.45
(syet5chg4 – SAC-ET5X-4PPK1-01)
PowerPack battery charging station, 4 slots, order separately: power supply, DC cable, power cord, fits for: ET5X, ET4X & ET8X PowerPack
€157.45
€157.45
(syet5xframio – SG-ET5X-10RCSE4-01)
€223.33
€223.33
(syet5xhols – SG-ET5X-8RCSE2-02)
€216.24
€216.24
(syet5xclip – SG-ET5X-DCLIP2-02)
€26.44
This article will be removed from range! Secure the last remainders of stock now!
€26.44
(syet50strap – SG-ET5X-HNDSTP-01)
€24.02
€24.02
(syet5xsstrap – SG-ET5X-SHDRSTP-01)
€54.05
€54.05
(sytc70stylus – SG-TC7X-STYLUS-03)
Stylus, incl.: coiled tether, pack of 3, fits for: TC51, TC56, TC7X, TC8000, MC3300, ET51/56 (Android), ET50/55 (Android), MC9300.
€54.05
€54.05
(syaeet5xxx-3c – Z1AE-ET5XXX-3C00)
€499.29
€499.29
(syaeet5xxx-5c – Z1AE-ET5XXX-5C00)
€825.51
€825.51
(syb5emh250-50 – Z1B5-EMH250-5000)
€160.91
€160.91
(ettocereet5-2c – Z1RE-ET5XXX-2C00)
€334.35
€334.35
(syet5x10scn7-02 – ZBK-ET5X-10SCN7-02)
€860.32
This article will be removed from range! Secure the last remainders of stock now!
€860.32
Data sheet & more
* The discount refers to the original sales price.