Skip to main content
Zebra ET51/ET56

Reliable, long-lasting tablets for every work environment

from

€1,227.90

(recommended retail price)
  • Robust enterprise tablets for office and field staff
  • Available with a 8.4'' or 10.1'' multi-touch display with Gorilla Glass
  • Intel quad-core processor and 4 GB RAM
  • Reliable connectivity: WLAN, GPS, Bluetooth, LTE (ET56)
  • Operating system: Android
1397

Description

The Zebra ET51/ET56 tablets combine the chic appearance of a consumer device with the necessary reliability of an enterprise tablet, and bridge the gap between the short-lived end consumer segment and the highly durable tablet area in the high price segment. With numerous expansion options, the elegant enterprise tablets cover a large working environment – perfect for use in the fields of transportation and logistics, field service not to mention in retail stores.

Both the compact 8.4'' and the 10.1'' display are readable in nearly any lighting conditions and also seamlessly react when wet or when the user is wearing gloves. The impact-resistant, scratch-proof Corning Gorilla Glass protects the tablets’ most sensitive components. The ET51/ET56 is IP65-certified against dust and jet water. Plus, it withstands impacts and shocks, making it practical for usage in a vehicle (from a forklift in the warehouse up to delivery trucks on the road).

For good native wireless communication the tablets convince with reliable wireless support (802.11ac/r/k/v), GPS and Bluetooth 4.2. For use in the field the ET56 offers full WWAN connectivity with a high data rate in the LTE standard. The rapid Apollo Lake quad-core processor with 1.6 GHz and 4 GB of DDR4 RAM thereby processes large amounts of data at a high speed. Another advantage: the processor minimises energy consumption and increases the life cycle of the battery.

On the rear of the tablets there is a practical 8 megapixel colour camera. Via the 2 megapixel front camera it is possible to video conference via WLAN or mobile networks. This way, users are ensured immediate help and support from external experts, colleagues or bosses. With the expansion module with a scan engine, they capture nearly every 1D or 2D barcode, no matter what condition it is in - damaged, dirty or poorly printed.

The tablets are also optionally available with Android. In these versions, they feature a higher resolution, a 13 megapixel colour camera on the back and a built-in 5 megapixel front camera. A Qualcomm Snapdragon 660 Octa-core processor with 2.2 GHz and 32 GB of flash memory process large amounts of data at high speed, while the powerful 6,440 mAh lithium polymer battery ensures long operating times. The interfaces include Bluetooth 5.0, WLAN (802.11 ac) and a USB-C interface. The 10.1" version also offers 2x2 MIMO, 4G LTE, as well as GPS, GLONASS, Galileo and Beidou support. The 8" version, on the other hand, is available with an integrated barcode scanner, as needed. Thanks to PRZM technology, it even captures damaged or dirty 1D/2D barcodes reliably and quickly.

As needed, the Android version is also available as an 8'' variant with an integrated barcode scanner. Thanks to PRZM technology, it even captures damaged or dirty 1D/2D barcodes reliably and quickly.

With the versatile accessories they expand not only the tablet itself, but also the application areas of the ET51/ET56. The Android versions are also supported by Zebra Mobility DNA.

Second-hand device
Zebra ET51 Kit 1, USB, BT, Wi-Fi, NFC, Android, kit (USB)

(markt_37106 – KIT-ET51CE-RTL-00-EU)

Topseller
Tablet PC, 20.3 cm (8''), capacitive, multi touch, Cam (5MP), webcam (2MP), brightness: 720cd, USB (type C), Bluetooth, Wi-Fi (802.11ac), audio, NFC, Micro SD-Slot, 2560x1600 pixels, Qualcomm 660, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android, IP65, incl.: cable (USB), power supply unit (EU), battery, hand-strap
In good condition. Retail packaging is missing. This is no longer a kit. Without USB-Cable, Power supply and Expansionpack!
Status:
Gold
In stock 1
No warranty
Second-hand device
Zebra ET51 Kit 1, USB, BT, Wi-Fi, NFC, Android, kit (USB)

(markt_39163 – KIT-ET51CE-RTL-00-EU)

Topseller
Tablet PC, 20.3 cm (8''), capacitive, multi touch, Cam (5MP), webcam (2MP), brightness: 720cd, USB (type C), Bluetooth, Wi-Fi (802.11ac), audio, NFC, Micro SD-Slot, 2560x1600 pixels, Qualcomm 660, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android, IP65, incl.: cable (USB), power supply unit (EU), battery, hand-strap
In good condition, accessories complete, no original packaging on the device and the accessories.
Status:
Silver
In stock 1
No warranty
Second-hand device
Zebra ET51 Kit 1, USB, BT, Wi-Fi, NFC, Android, kit (USB)

(markt_45649 – KIT-ET51CE-RTL-00-EU)

Topseller
Tablet PC, 20.3 cm (8''), capacitive, multi touch, Cam (5MP), webcam (2MP), brightness: 720cd, USB (type C), Bluetooth, Wi-Fi (802.11ac), audio, NFC, Micro SD-Slot, 2560x1600 pixels, Qualcomm 660, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android, IP65, incl.: cable (USB), power supply unit (EU), battery, hand-strap
like new / in original box / works fine / no usb cable or power supply
Status:
Gold
In stock 1
4 months warranty
Second-hand device
Zebra ET51 Kit 1, USB, BT, Wi-Fi, NFC, Android, kit (USB)

(markt_45648 – KIT-ET51CE-RTL-00-EU)

Topseller
Tablet PC, 20.3 cm (8''), capacitive, multi touch, Cam (5MP), webcam (2MP), brightness: 720cd, USB (type C), Bluetooth, Wi-Fi (802.11ac), audio, NFC, Micro SD-Slot, 2560x1600 pixels, Qualcomm 660, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android, IP65, incl.: cable (USB), power supply unit (EU), battery, hand-strap
in good condition / no original box / works fine / no usb cable or power supply
Status:
Silver
In stock 1
5 months warranty
Second-hand device
Zebra ET51 Kit 2, 2D, SE4710, USB, BT, Wi-Fi, NFC, Android, kit (USB)

(markt_37661 – KIT-ET51CE-RTL-SF-EU)

Topseller
Tablet PC, 2D, imager (SE4710), 20.3 cm (8''), capacitive, multi touch, Cam (5MP), webcam (2MP), brightness: 540cd, USB (type C), Bluetooth, Wi-Fi (802.11ac), audio, NFC, Micro SD-Slot, 2560x1600 pixels, Qualcomm 660, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android, IP65, incl.: cable (USB), USB power charger, EU, battery, protective case
Fully functional, incl. battery, EU USB charger and USB-C cable, Android, without original packaging.
Status:
Bronze
In stock 1
No warranty
Second-hand device
Zebra ET51 Kit 2, 2D, SE4710, USB, BT, Wi-Fi, NFC, Android, kit (USB)

(markt_39448 – KIT-ET51CE-RTL-SF-EU)

Topseller
Tablet PC, 2D, imager (SE4710), 20.3 cm (8''), capacitive, multi touch, Cam (5MP), webcam (2MP), brightness: 540cd, USB (type C), Bluetooth, Wi-Fi (802.11ac), audio, NFC, Micro SD-Slot, 2560x1600 pixels, Qualcomm 660, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android, IP65, incl.: cable (USB), USB power charger, EU, battery, protective case
In ok condition incl. battery, powerpack and expansion module, Android, original box.
Status:
Bronze
In stock 1
No warranty
Second-hand device
Zebra ET51 Kit 2, 2D, SE4710, USB, BT, Wi-Fi, NFC, Android, kit (USB)

(markt_39449 – KIT-ET51CE-RTL-SF-EU)

Topseller
Tablet PC, 2D, imager (SE4710), 20.3 cm (8''), capacitive, multi touch, Cam (5MP), webcam (2MP), brightness: 540cd, USB (type C), Bluetooth, Wi-Fi (802.11ac), audio, NFC, Micro SD-Slot, 2560x1600 pixels, Qualcomm 660, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android, IP65, incl.: cable (USB), USB power charger, EU, battery, protective case
Fully functional, incl. battery, EU USB charger and USB-C cable, Android 13, original packaging.
Status:
Silver
In stock 1
No warranty
Second-hand device
Zebra ET51, USB, BT, Wi-Fi, NFC, Android

(markt_41640 – ET51CE-G21E-00A6)

Tablet PC, 20.3 cm (8''), capacitive, multi touch, Cam (13MP), front camera (5MP), brightness: 720cd, USB (type C), Bluetooth, Wi-Fi (802.11ac), audio, NFC, Micro SD-Slot, 2560x1600 pixels, Qualcomm 660, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android, IP65, incl.: battery, order separately: power supply unit
In ok condition incl. battery, charging station, power supply kit, power cord Eu and expansion module, Android, without original box.
Included: Power cord, C13, EU (kaltkabel)  /  Zebra expansion module, 2D, Android, 8'' (syet5x8expw-2)  /  Zebra charging/communication station, USB, Ethernet (syet5xdock)  /  Zebra power supply, kit (synt1250wkit)
Status:
Bronze
In stock 1
No warranty
Second-hand device
Zebra ET51, USB, BT, Wi-Fi, NFC, Android

(markt_31587 – ET51CE-G21E-00A6)

Tablet PC, 20.3 cm (8''), capacitive, multi touch, Cam (13MP), front camera (5MP), brightness: 720cd, USB (type C), Bluetooth, Wi-Fi (802.11ac), audio, NFC, Micro SD-Slot, 2560x1600 pixels, Qualcomm 660, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android, IP65, incl.: battery, order separately: power supply unit
in used condition /no box / incl. battery
Status:
Bronze
In stock 1
No warranty
Second-hand device
Zebra ET51, USB, BT, Wi-Fi, NFC, Android

(markt_40612 – ET51CE-G21E-00A6)

Tablet PC, 20.3 cm (8''), capacitive, multi touch, Cam (13MP), front camera (5MP), brightness: 720cd, USB (type C), Bluetooth, Wi-Fi (802.11ac), audio, NFC, Micro SD-Slot, 2560x1600 pixels, Qualcomm 660, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android, IP65, incl.: battery, order separately: power supply unit
In good condition, works fine, in ovpaccessories: case, dockingstation, power supply, cables
Included: Zebra expansion module, 2D, Android, 8'' (syet5x8expw-2)  /  Zebra rugged frame, 8'' (syet5xhols)  /  Zebra charging station (syet5xslot)  /  Zebra DC cable (synt1250cab)  /  Zebra power supply (synt1250w)
Status:
Gold
In stock 1
1 month warranty
Second-hand device
Zebra ET51, 2D, SE4710, USB, BT, Wi-Fi, NFC, Android

(markt_42404 – ET51CE-G21E-SFA6)

Tablet PC, 2D, imager (SE4710), 21.3cm (8.4''), capacitive, multi touch, Camera (5MP), webcam (2MP), brightness: 540cd, USB (type C), Bluetooth, Wi-Fi (802.11ac), audio, NFC, Micro SD-Slot, 2560x1600 pixels, Qualcomm 660, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android, IP65, incl.: battery, protective case, order separately: power supply unit
In good condition incl. battery, EU USB charger, USB-C cable, rugged frame and vehicle mounting kit, Android 10, without original packaging.
Status:
Bronze
In stock 1
No warranty
Zebra ET51 Kit 1, USB, BT, Wi-Fi, NFC, Android, kit (USB)

(syet51kitand-uk – KIT-ET51CE-RTL-00-GB)

Tablet PC, 20.3 cm (8''), capacitive, multi touch, Cam (5MP), webcam (2MP), brightness: 720cd, USB (type C), Bluetooth, Wi-Fi (802.11ac), audio, NFC, Micro SD-Slot, 2560x1600 pixels, Qualcomm 660, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android, IP65, incl.: cable (USB), power supply unit (UK), battery, hand-strap

€1,227.90

Special article: no cancellation or return possible!

This article will be removed from range! Secure the last remainders of stock now!

€1,227.90

In stock 1
12 months warranty
Second-hand device
Zebra ET51 Kit 2, 2D, SE4710, USB, BT, Wi-Fi, NFC, Android, kit (USB)

(markt_38328 – KIT-ET51CE-RTL-SF-GB)

Tablet PC, 2D, imager (SE4710), 20.3 cm (8''), capacitive, multi touch, Cam (5MP), webcam (2MP), brightness: 540cd, USB (type C), Bluetooth, Wi-Fi (802.11ac), audio, NFC, Micro SD-Slot, 2560x1600 pixels, Qualcomm 660, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android, IP65, incl.: cable (USB), USB power charger, UK, battery, protective case
UK Kit . With POWER SUPPLY & USB Cable
Status:
Gold
In stock 1
3 months warranty
Zebra ET56 Kit 4, USB, BT, Wi-Fi, 4G, NFC, GPS, Android, kit (USB)

(syet56kitand – KIT-ET56CE-FLD-00-EU)

Tablet PC, 21.3cm (8.4''), capacitive, multi touch, GPS, Cam (5MP), webcam (2MP), brightness: 720cd, USB (type C), Bluetooth, Wi-Fi (802.11ac), audio, 4G (LTE), NFC, Micro SD-Slot, 2560x1600 pixels, Qualcomm 660, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android, IP65, incl.: cable (USB), USB power charger, EU, battery, 6150mAh, protective case

€1,473.49

This article will be removed from range! Secure the last remainders of stock now!

€1,473.49

In stock 7
12 months warranty

Accessories

Zebra power supply, EU

(sytc51ps – PWR-WUA5V12W0EU)

Power supply, 5 VDC, 2.5 A, incl.: plug (EU), order separately: connection cable (USB-A)

€32.58

€32.58

In stock 5701
12 months warranty
Mobilis screen protector, IK06, ET5X (10.1'')

(mob036174 – 036174)

Screen protector, Anti-Shock IK06, Hardness: 5H, Clear, Easy set up (bubble free), fits for: ET5X (10.1'')

€31.66

Special article: no cancellation or return possible!

This article will be removed from range! Secure the last remainders of stock now!

€31.66

In stock 18
24 months warranty
Mobilis protective case

(mob067005 – 067005)

Protective case, incl.: kick stand, hand strap (rotating), fits for: ET51/56 (10.1'')

€51.66

€51.66

In stock 2
24 months warranty
Brodit Charging Module, USB

(brd216230 – 216230)

Charging Module with USB-A Host and DC connector 5,5x5,1-1,5mm for Module Upgrade holders, no cables included, fits for: ET50, ET51, ET55, ET56

€159.66

€159.66

In stock 0
12 months warranty
Brodit voltage converter

(brd216240 – 216240)

Voltage converter, 48 VAC, 12 VDC, fits for: ET5X

€138.65

€138.65

In stock 2
12 months warranty
Brodit extension plate

(brd216250 – 216250)

Extension plate, fit for: Zebra ET5X 8.4'' Module Upgrade

€16.80

€16.80

In stock 0
12 months warranty
Brodit extension plate

(brd216251 – 216251)

Extension plate, fit for: Zebra ET5X 10.1'' Module Upgrade

€16.80

€16.80

In stock 0
12 months warranty
Brodit USB-Hub for ET5x

(brd216258 – 216258)

USB-Hub for ET5x, 3x USB-A, 1x Ethernet, fits for: Module upgrade cradles

€84.03

€84.03

In stock 0
12 months warranty
Zebra Micro USB Cable

(symc9500cabu – 25-124330-01R)

Micro USB cable, ActiveSync, length: 1.22m, fits for: Zebra charging/transmitter cradles

€12.02

€12.02

In stock 290
3 months warranty
Zebra power cord, C13, IT

(syacabit – 50-16000-671R)

Power cord, C13, Italy, length: 1.8 m, colour: black

€18.03

€18.03

In stock 120
1 month warranty
Brodit charging station (MOLEX), ET5X (10'') (protective case)

(brd510892 – 510892)

Charging station (MOLEX), fits for: ET5X (10'') (protective case)

€302.51

€302.51

In stock 0
12 months warranty
Zebra shoulder strap

(systrap – 58-40000-007R)

Shoulder strap, fits for: holster

€17.14

€17.14

In stock 22
3 months warranty
Zebra ET5x charging cradle

(brd736267 – 736267)

ET5x charging cradle, 2 keys, for robust frame, with/without Exp. Modules. USB-A Host+DC5,5x5,1-1,5mm (no cable included).

€327.72

€327.72

In stock 0
12 months warranty
Zebra ET5x 10.1 Module Upgrade

(brd739266 – 739266)

Zebra ET5x Passiv Mount lockable, 10.1 Module Upgrade, 2 keys included, for robust frame, with/without expansion module/handstrap. AMPS+VESA 75 holes. Module Upgrade Cradle.

€176.46

€176.46

In stock 0
12 months warranty
Zebra ET5x Passiv Mount

(brd739267 – 739267)

Zebra ET5x Passiv Mount, 8.4 Module Upgrade, 2 keys included, for robust frame, with/without expansion module/handstrap. AMPS+VESA 75 holes. Module Upgrade Cradle.

€176.46

€176.46

In stock 8
12 months warranty
Second-hand device
Zebra ET5x Passiv Mount

(markt_50688 – 739267)

Zebra ET5x Passiv Mount, 8.4 Module Upgrade, 2 keys included, for robust frame, with/without expansion module/handstrap. AMPS+VESA 75 holes. Module Upgrade Cradle.
In very good condition with original packaging.
Status:
Gold
In stock 1
No warranty
Brodit Holder for Zebra ET5X

(brd741266 – 741266)

Brodit bracket with lock, compatible with Rugged Frame and with/without Expansion Module/Handstrap, with MPS, VESA 75, for Zebra 10'' ET50, ET51, ET55, ET56

€168.06

€168.06

In stock 0
12 months warranty
Brodit Active Mount

(brd747267 – 747267)

Active Mount, for devices with Rugged Frame, with or without expansion module / handstrap, order separately: power supply, USB-A Host, Upgrade Module, fits for: ET5x (8'')

€310.92

€310.92

In stock 0
12 months warranty
Zebra wall mounting bracket

(sytc8000mount – BRKT-SCRD-SMRK-01)

Wall mounting bracket, fits for: charging stations, 5 slots charging-/communication stations

€185.36

€185.36

In stock 0
1 month warranty
Zebra spare battery

(syet5xbat10-3 – BTRY-ET5X-10IN3-02)

Spare battery, 4950 mAh, internal battery, fits for: ET51/ET56 (10 inch, Windows)

€117.16

€117.16

In stock 78
No warranty
Zebra spare battery

(syet51exbat – BTRY-ET5X-10IN5-01)

Spare battery, extended, 9660 mAh, fits for: ET51/ET56 (10'' Android)

€152.56

€152.56

In stock 4
12 months warranty
Zebra spare battery, 6440 mAh

(syet5xbatp8 – BTRY-ET5X-8IN5-01)

Spare battery, 6440 mAh, fits for: ET51/ET56 (8'', Android)

€134.54

€134.54

In stock 0
No warranty
Zebra PowerPack

(syet50bat2 – BTRY-ET5X-PRPK2-01)

PowerPack battery, order separately: expansion module, fits for: ET5X, ET4X

€258.27

€258.27

In stock 492
3 months warranty
Second-hand device
Zebra PowerPack

(markt_48544 – BTRY-ET5X-PRPK2-01)

PowerPack battery, order separately: expansion module, fits for: ET5X
In good condition without original box.
Status:
Silver
In stock 1
No warranty
Second-hand device
Zebra PowerPack

(markt_47848 – BTRY-ET5X-PRPK2-01)

PowerPack battery, order separately: expansion module, fits for: ET5X
In good condition without original box.
Status:
Silver
In stock 1
No warranty
Second-hand device
Zebra PowerPack

(markt_61117 – BTRY-ET5X-PRPK2-01)

PowerPack battery, order separately: expansion module, fits for: ET5X, ET4X

In good condition with original box.
Status:
Silver
In stock 1
No warranty
Zebra connection cable, RS-232

(sycabr71 – CBA-R71-C09ZAR)

Connection cable, RS-232, length: 2.7 m, coiled, power on PIN 9, TxD on PIN 2

€84.04

€84.04

In stock 19
1 month warranty
Zebra connection cable, RS-232, freezer

(sycabrf2 – CBA-RF2-C09ZAR)

Connection cable, RS-232, freezer, length: 2.7 m, coiled, power on PIN 9, TxD on PIN 2

€64.66

€64.66

In stock 11
1 month warranty
Zebra connection cable, USB

(sycabu09 – CBA-U09-C15ZAR)

Connection cable, USB, length: 4.5 m, coiled, cable code: U09

€96.98

€96.98

In stock 11
1 month warranty
Zebra connection cable, USB

(sycabu12 – CBA-U12-C09ZAR)

Connection cable, USB, length: 2.7 m, coiled, cable code: U12

€34.47

€34.47

In stock 178
1 month warranty
Zebra connection cable, USB, freezer

(sycabuf6 – CBA-UF6-C12ZAR)

Connection cable, USB, shielded, freezer, length: 3.65 m, coiled

€96.98

€96.98

In stock 434
1 month warranty
Zebra DC cable

(sydc-8 – CBL-DC-381A1-01)

DC cable, connector (power supply: 8 pin / station 4 pin), fits for: multi slot station

€31.24

€31.24

In stock 2128
1 month warranty
Zebra DC cable

(sydc-7 – CBL-DC-382A1-01)

DC cable, connector (power supply: 8 pin / station 4 pin), extended release latch, fits for: multi slot station

€31.24

€31.24

In stock 290
1 month warranty
Zebra DC cable

(synt1250cab – CBL-DC-388A1-01)

DC cable, connector (power supply: 4 pin / station 1 pin), fits for: 1 slot station, 4 slot battery station

€10.80

€10.80

In stock 4689
1 month warranty
Zebra adaptor plug, EU

(syadapt-eu – CN-000803-05)

Adaptor clip for power supply, EU

€10.46

€10.46

In stock 0
No warranty
Zebra adapter, UK

(syadapt-uk – CN-000803-06)

Adapter clip for power supply, UK

€10.46

€10.46

In stock 0
No warranty
Zebra charging station

(syet5xslot – CRD-ET5X-1SCG2)

Charging station, order separately: power supply, DC cable, power cord, fits for: ET5X

€243.26

€243.26

In stock 45
12 months warranty
Second-hand device
Zebra charging/communication station, USB, Ethernet

(markt_48439 – CRD-ET5X-1SCOM1)

Charging/communication station, 3x USB 3.0, 1x ethernet, 1x HDMI, order separately: power supply, DC cable, power cord, fits for: ET5X
In very good condition / Original box / with two shims.
Status:
Gold
In stock 1
8 months warranty
Second-hand device
Zebra charging/communication station, USB, Ethernet

(markt_53694 – CRD-ET5X-1SCOM1)

Charging/communication station, 3x USB 3.0, 1x ethernet, 1x HDMI, order separately: power supply, DC cable, power cord, fits for: ET5X
Device is in very good condition. Original box.
Status:
Gold
In stock 1
11 months warranty
Second-hand device
Zebra charging/communication station, USB, ethernet

(markt_47122 – CRD-ET5X-1SCOM2R)

Charging/communication station, 3x USB 3.0, ethernet, 1x HDMI, order separately: power supply, DC cable, power cord, fits for: ET5X (Rugged Frame)
In good condition / in original box / with power supply kit, EU power cord.
Status:
Gold
In stock 1
5 months warranty
Zebra charging station, 4 slots

(syet5xcha-2 – CRD-ET5X-SE4CO3-01)

Charging station, 4 slots, order separately: power supply, DC cable, power cord, fits for: ET5X

€801.58

€801.58

In stock 2
12 months warranty
Second-hand device
Zebra charging station, 4 slots

(markt_40608 – CRD-ET5X-SE4CO3-01)

Charging station, 4 slots, order separately: power supply, DC cable, power cord, fits for: ET5X
In ok condition with power supply kit and power cords EU/UK, without original packaging.
Status:
Bronze
In stock 1
No warranty
Android Zero Touch Registration License by Jarltech

(jtbindszt – jtbindszt)

Android Zero Touch Registration License for one device

€9.42

€9.42

Available
No warranty
Zebra power supply, kit

(synt1250wkit – KIT-PWR-12V50W)

Power supply (PWR-BGA12V50W0WW), 12 VDC, 4.16 A, connector: 4 pin, incl.: DC cable (CBL-DC-388A1-01) (power supply: 4 pin, station 1 pin), order separately: power cord (C13)

€69.68

€69.68

In stock 4689
12 months warranty
Second-hand device
Zebra power supply, kit

(markt_65509 – KIT-PWR-12V50W)

Power supply (PWR-BGA12V50W0WW), 12 VDC, 4.16 A, connector: 4 pin, incl.: DC cable (CBL-DC-388A1-01) (power supply: 4 pin, station 1 pin), order separately: power cord (C13)
Status:
Gold
In stock 1
12 months warranty
Zebra connection cable, USB

(ettqln320ucab – P1031365-055)

Connection cable, USB (A/mini), strain relief, fits for: ZQ600, QLn220, QLn320, QLn420

€28.93

€28.93

In stock 77
1 month warranty
Zebra power supply

(ettzq51dc – P1063406-030)

Power supply, DC-DC, open ended cable, 12-24V, fits for: vehicle dock, ZQ500, ZQ600, QLn220, QLn320, QLn420

€52.63

€52.63

In stock 23
1 month warranty
Second-hand device
Zebra power supply

(markt_62963 – P1063406-030)

Power supply, DC-DC, open ended cable, 12-24V, fits for: vehicle dock, ZQ500, ZQ600, QLn220, QLn320, QLn420
like new, very good condition
Status:
Gold
In stock 1
1 month warranty
Zebra power supply

(ettzq51dc2 – P1063406-031)

Power supply, DC-DC, with cigarette lighter adapter, 12-24V, fits for: ZQ500, ZQ600, QLn220, QLn320, QLn420, vehicle dock

€52.63

€52.63

In stock 91
1 month warranty
Zebra power supply

(synt12108w – PWR-BGA12V108W0WW)

Power supply, 12 VDC, 9 A, connector: 8 pin, order separately: DC cable, power cord (C13)

€126.13

€126.13

In stock 2114
12 months warranty
Second-hand device
Zebra power supply

(markt_64879 – PWR-BGA12V108W0WW)

Power supply, 12 VDC, 9 A, connector: 8 pin, order separately: DC cable, power cord (C13)
Status:
Gold
In stock 1
11 months warranty
Zebra power supply

(synt1250w – PWR-BGA12V50W0WW)

Power supply, 12 VDC, 4,16 A, connector: 4 pin, order separately: DC cable, power cord (C13)

€58.85

€58.85

In stock 5775
1 month warranty
Zebra power supply, UK

(sytc51ps-uk – PWR-WUA5V12W0GB)

Power supply, 5 VDC, 2.5 A, incl.: plug (UK), order separately: connection cable (USB-A), fits for: MC22, MC27

€32.58

€32.58

In stock 354
No warranty
Zebra power supply, USB

(sypsaw – PWR-WUA5V6W0WW)

Power supply, USB A, Input: 100-240 V, 0.2 A, Output: 5.2 V, 1.2 A, incl.: Adapter clips (EU, UK, US, AU), order separately: connection cable (USB)

€20.44

€20.44

In stock 83
1 month warranty
Main image file
Art_25284.jpg
RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (8")

(ramholder74 – RAM-HOL-ZE10CLU)

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with rugged boot.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10CLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10CLU holder is supplied.

€160.46

€160.46

In stock 0
36 months warranty
Main image file
Art_25285.jpg
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (8")

(ramholder76 – RAM-HOL-ZE10KLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10KLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with keys
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10KLU holder is supplied.

€190.71

€190.71

In stock 0
36 months warranty
Main image file
Art_25286.jpg
RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (8")

(ramholder53 – RAM-HOL-ZE10PCLU)

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PCLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Input Connector: 5.5 mm DC
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PCLU holder is supplied.

€232.73

€232.73

In stock 0
36 months warranty
Main image file
RAM-HOL-ZE10PD2CLU
RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (8")

(ramholder22 – RAM-HOL-ZE10PD2CLU)

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PD2CLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PD2CLU holder is supplied.

€287.35

€287.35

In stock 2
36 months warranty
Main image file
Art_25288.jpg
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (8")

(ramholder102 – RAM-HOL-ZE10PD2KLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PD2KLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with key
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PD2KLU holder is supplied.

€308.36

€308.36

In stock 0
36 months warranty
Main image file
RAM-HOL-ZE10PD2U
RAM Mounts Form-Fit Holder for Zebra ET51/56 (8")

(ramholder23 – RAM-HOL-ZE10PD2U)

This RAM Mounts holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PD2U:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PD2U holder is supplied.

€247.86

€247.86

In stock 2
36 months warranty
Main image file
Art_25290.jpg
RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (8")

(ramholder85 – RAM-HOL-ZE10PDCLU)

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PDCLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Input Connector: 5.5 mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PDCLU holder is supplied.

€266.34

€266.34

In stock 0
36 months warranty
Main image file
Art_25291.jpg
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (8")

(ramholder77 – RAM-HOL-ZE10PDKLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PDKLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with key
Input Connector: 5.5 mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PDKLU holder is supplied.

€283.99

€283.99

In stock 0
36 months warranty
Main image file
Art_25292.jpg
RAM Mounts Form-Fit Holder (Latch) for Zebra ET51/56 (8")

(ramholder62 – RAM-HOL-ZE10PDU)

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with rugged case.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PDU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
With Latch
Prepared for mounting additional devices such as handhelds
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PDU holder is supplied.

€231.89

€231.89

In stock 0
36 months warranty
Main image file
Art_25293.jpg
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (8")

(ramholder58 – RAM-HOL-ZE10PKLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PKLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with key
Input Connector: 5.5mm DC
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PKLU holder is supplied.

€253.74

€253.74

In stock 0
36 months warranty
Main image file
RAM-HOL-ZE10PU
RAM Mounts Form-Fit Holder (Latch) for Zebra ET51/56 (8")

(ramholder4 – RAM-HOL-ZE10PU)

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Case.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
With Latch
Prepared for mounting additional devices such as handhelds
Input Connector: 5.5mm DC
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PU holder is supplied.

€196.60

€196.60

In stock 1
36 months warranty
Main image file
Art_25295.jpg
RAM Mounts Form-Fit Holder (Latch) for Zebra ET51/56 (8")

(ramholder109 – RAM-HOL-ZE10U)

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with rugged boot.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10U:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
With Latch
Additional mounting plate for attaching additional devices or accessories
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10U holder is supplied.

€125.17

€125.17

In stock 0
36 months warranty
Main image file
Art_25296.jpg
RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (10")

(ramholder86 – RAM-HOL-ZE11CLU)

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 10.1“ Series with rugged boot.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11CLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11CLU holder is supplied.

€162.98

€162.98

In stock 0
36 months warranty
Main image file
Art_25297.jpg
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (10")

(ramholder78 – RAM-HOL-ZE11KLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 10.1“ Series with rugged boot.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11KLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with keys
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11KLU holder is supplied.

€197.44

€197.44

In stock 0
36 months warranty
Main image file
Art_25298.jpg
RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (10")

(ramholder34 – RAM-HOL-ZE11PCLU)

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PCLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Input Connector: 5.5mm DC
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PCLU holder is supplied.

€253.74

€253.74

In stock 0
36 months warranty
Main image file
RAM-HOL-ZE11PD2CLU
RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (10")

(ramholder24 – RAM-HOL-ZE11PD2CLU)

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PD2CLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PD2CLU holder is supplied.

€305.00

€305.00

In stock 0
36 months warranty
Main image file
RAM-HOL-ZE11PD2KLU
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (10")

(ramholder6 – RAM-HOL-ZE11PD2KLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PD2KLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with key
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PD2KLU holder is supplied.

€326.01

€326.01

In stock 0
36 months warranty
Main image file
RAM-HOL-ZE11PD2U
RAM Mounts Form-Fit Holder for Zebra ET51/56 (10")

(ramholder5 – RAM-HOL-ZE11PD2U)

This RAM Mounts holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PD2U:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PD2U holder is supplied.

€266.34

€266.34

In stock 0
36 months warranty
Main image file
Art_25302.jpg
RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (10")

(ramholder35 – RAM-HOL-ZE11PDCLU)

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PDCLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PDCLU holder is supplied.

€280.63

€280.63

In stock 0
36 months warranty
Main image file
RAM-HOL-ZE11PDKLU
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (10")

(ramholder3 – RAM-HOL-ZE11PDKLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PDKLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with key
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PDKLU holder is supplied.

€305.84

€305.84

In stock 0
36 months warranty
Main image file
Art_25191.jpg
RAM Mounts Form-Fit Holder for Zebra ET51/56 (10")

(ramholder112 – RAM-HOL-ZE11PDU)

This RAM Mounts holder is suitable for Zebra ET5x 10.1“ Series with rugged boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PDU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Input Connector: 5.5mm DC-Connector
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PDU holder is supplied.

€248.70

€248.70

In stock 0
36 months warranty
Main image file
Art_25304.jpg
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (10")

(ramholder49 – RAM-HOL-ZE11PKLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PKLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with key
Input Connector: 5.5mm DC
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PKLU holder is supplied.

€268.03

€268.03

In stock 0
36 months warranty
Second-hand device
RAM Mounts Charging Dock

(markt_62970 – RAM-HOL-ZE11PU)

RAM Mounts Charging Dock for Zebra ET5x 10.1 Series - 5.5 mm jack input, VESA 75x75 mount
In good condition in original box
Status:
Gold
In stock 1
32 months warranty
Main image file
RAM-HOL-ZE11PU
RAM Mounts Form-Fit Holder (Latch) for Zebra ET51/56 (10")

(ramholder25 – RAM-HOL-ZE11PU)

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET5x 10.1“ with rugged boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
With Latch
Prepared for mounting additional devices such as handhelds
Input Connector: 5.5mm DC-Connector
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PU holder is supplied.

€208.36

€208.36

In stock 0
36 months warranty
Main image file
RAM-HOL-ZE11U
RAM Mounts Form-Fit Holder (Latch) for Zebra ET51/56 (10")

(ramholze11 – RAM-HOL-ZE11U)

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET5x 10.1“.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11U:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
With Latch
Prepared for mounting additional devices such as handhelds
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11U holder is supplied.

€141.13

€141.13

In stock 0
36 months warranty
Main image file
RAM-HOL-ZE21PD2U
RAM Mounts EZ-Roll'r Holder for Zebra ET40/45 (10")

(ramet4t-2 – RAM-HOL-ZE21PD2U)

This RAM Mounts EZ-Roll‘r holder is suitable for Zebra ET40 & ET45 10“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE21PD2U:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional informations:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE21U.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCK-ZE21PD2U.

Devices shown are not included in the delivery.
Only the RAM-HOL-ZE21PD2U holder is supplied.

€248.70

€248.70

In stock 0
36 months warranty
Zebra PowerPack battery charging station, 4 slots

(syet5chg4 – SAC-ET5X-4PPK1-01)

PowerPack battery charging station, 4 slots, order separately: power supply, DC cable, power cord, fits for: ET5X, ET4X & ET8X PowerPack

€162.17

€162.17

In stock 80
1 month warranty
Second-hand device
Zebra PowerPack battery charging station, 4 slots

(markt_39070 – SAC-ET5X-4PPK1-01)

PowerPack battery charging station, 4 slots, order separately: power supply, DC cable, power cord, fits for: ET5X, ET4X & ET8X PowerPack

In good condition with power supply kit and power cord EU, original packaging.
Status:
Silver
In stock 1
No warranty
Second-hand device
Zebra PowerPack battery charging station, 4 slots

(markt_38094 – SAC-ET5X-4PPK1-01)

PowerPack battery charging station, 4 slots, order separately: power supply, DC cable, power cord, fits for: ET5X, ET4X & ET8X PowerPack

In good condition with power supply kit and power cords EU/UK, without original packaging.
Status:
Bronze
In stock 1
No warranty
Second-hand device
Zebra PowerPack battery charging station, 4 slots

(markt_38096 – SAC-ET5X-4PPK1-01)

PowerPack battery charging station, 4 slots, order separately: power supply, DC cable, power cord, fits for: ET5X, ET4X & ET8X PowerPack

In good condition with power supply kit and power cord EU, without original box.
Status:
Silver
In stock 1
No warranty
Second-hand device
Zebra PowerPack battery charging station, 4 slots

(markt_40583 – SAC-ET5X-4PPK1-01)

PowerPack battery charging station, 4 slots, order separately: power supply, DC cable, power cord, fits for: ET5X, ET4X & ET8X PowerPack

In good condition incl. power supply kit and power cord EU, without original packaging.
Status:
Silver
In stock 1
No warranty
Second-hand device
Zebra keyboard, DE

(markt_48384 – SG-ET5X-10KBC-DE1-01)

Keyboard, 2-in-1, DE, fits for: ET51/ET56 (10'')
Like new / works fine / in OVP
Status:
Gold
In stock 1
No warranty
Second-hand device
Zebra keyboard, UK

(markt_55449 – SG-ET5X-10KBC-UK1-01)

Keyboard, 2-in-1, UK, fits for: ET51/ET56 (10'')
Status:
Platinum
In stock 1
No warranty
Zebra ET5x Rugged Frame

(syet5xframio – SG-ET5X-10RCSE4-01)

ET5x Rugged Frame with I/O connector, for 10'' tablets, compatible with extended batteries and Handle/Shoulder Straps

€223.33

€223.33

In stock 0
No warranty
Zebra rugged frame, 8''

(syet5xhols – SG-ET5X-8RCSE2-02)

Rugged Frame, incl.: rugged I/O connector, fits for: ET5X (8'')

€216.24

€216.24

In stock 36
36 months warranty
Second-hand device
Zebra rugged frame, 8''

(markt_41068 – SG-ET5X-8RCSE2-02)

Rugged Frame, incl.: rugged I/O connector, fits for: ET5X (8'')
With traces of usage.
Status:
Silver
In stock 1
1 month warranty
Second-hand device
Zebra rugged frame, 8''

(markt_45228 – SG-ET5X-8RCSE2-02)

Rugged Frame, incl.: rugged I/O connector, fits for: ET5X (8'')
In used condition without original packaging
Status:
Bronze
In stock 1
No warranty
Zebra handle strap

(syet50strap – SG-ET5X-HNDSTP-01)

Handle strap, order separately: rugged frame, D-Clips, fits for: ET5X

€24.02

€24.02

In stock 0
3 months warranty
Zebra shoulder strap

(syet5xsstrap – SG-ET5X-SHDRSTP-01)

Zebra shoulder strap, fits for: ET5X

€54.05

€54.05

In stock 336
3 months warranty
Second-hand device
Zebra shoulder strap

(markt_48640 – SG-ET5X-SHDRSTP-01)

Zebra shoulder strap, fits for: ET5X
in good condition, without original box
Included: Zebra D-Clips (syet5xclip)
Status:
Silver
In stock 1
No warranty
Zebra stylus, pack of 3

(sytc70stylus – SG-TC7X-STYLUS-03)

Stylus, incl.: coiled tether, pack of 3, fits for: TC51, TC56, TC7X, TC8000, MC3300, ET51/56 (Android), ET50/55 (Android), MC9300.

€54.05

€54.05

In stock 38
12 months warranty
Zebra Service, ET5x

(syaeet5xxx-3c – Z1AE-ET5XXX-3C00)

3 Year Zebra OneCare Essential. Includes Comprehensive Coverage.

€524.25

€524.25

Available
No warranty
Zebra Service, OneCare Essential, 5 Years

(syaeet5xxx-5c – Z1AE-ET5XXX-5C00)

Zebra OneCare Essential, with Comprehensive Coverage, 5 Years, fits for: ET5X

€825.51

€825.51

Available
No warranty
Zebra service TSS, software support, 5 years

(syb5emh250-50 – Z1B5-EMH250-5000)

Zebra OneCare technical and software support (TSS), term: 5 years, incl.: phone support, software maintenance, price per device

€160.91

€160.91

Available
No warranty
Zebra service

(ettocereet5-2c – Z1RE-ET5XXX-2C00)

OneCare Essential, 2 Jahre, renewal, ET5XXX

€351.07

€351.07

Available
No warranty
Zebra expansion module, 2D, Android, 10''

(syet5x10scn7-02 – ZBK-ET5X-10SCN7-02)

Expansion module, SE4770 barcode scanner (1D, 2D), range: 1.6 inch to 36.3 inch, rotating hand strap, fits for: ET51/ET56 (Android, 10'')

€860.32

This article will be removed from range! Secure the last remainders of stock now!

€860.32

In stock 15
3 months warranty

Data sheet & more

Offers and indicated delivery times are not binding and only valid for resellers. Prices are in EUR, exclusive of VAT and subject to change. Errors excepted.

* The discount refers to the original sales price.

CEO ONLINE – Ask me anything!

Open the chat dialogue, start a new conversation and select CEO under Department.