Skip to main content
Zebra ET40/ET45
Attractive business tablets for indoors and out
Zebra ET40/ET45
Attractive business tablets for indoors and out
from

€804.76

(recommended retail price)
Log in to see prices
  • Business tablets with an integrated enterprise scanner
  • Capacitive 8" or 10" multi-touch display with Corning Gorilla Glass
  • IP65- and MIL-STD-810H-certified, suited for office service and field service
  • Wi-Fi 6, 5G, Bluetooth 5.1 (BLE), NFC and GPS (ET45 only)
  • Supports the tools of »Mobility DNA«
1396

Description

The handy business tablets ET40 and ET45 from Zebra offer everything needed to get started right away at top performance after unpacking. They are available with either a capacitive 8" or 10" multi-touch display with Corning Gorilla Glass and an Android operating system. Plus, they feature an integrated 1D/2D barcode scanner with a Zebra scan engine (SE4100 or SE4710).
Additional equipment includes a swappable 6,100 mAh battery (8") or 7,600-mAh battery (10"), a push-to-talk function and powerful wireless communication. If this is not enough, then optionally expand the tablets with the tools of Zebra Mobility DNA or convert it into a fully-fledged PBX handset via Zebra Workforce Connect Voice. Naturally, the ET40 and ET45 are tough: According to IP65 and MIL-STD-810H they are resistant against dust, water and falls. Plus, they are suited for both office employees and field service.
Variants
Marketplace enabled

Availability

Zebra ET40, 2D, SE4100, 25.4 cm (10''), USB-C, BT, NFC, Android, GMS

(syet40-2 – ET40AB-001C1B0-A6)

Topseller
Tablet PC, 2D, imager (SE4100), screen size: 25.4 cm (10''), Touchscreen, resolution: 1920x1200 pixels, Camera (13 MP), front camera (5 MP), brightness 500cd, connection: USB-C, Bluetooth, Wi-Fi 6, NFC, Qualcomm Octa Core, 2.2 GHz, RAM: 4 GB, Flash: 64 GB, Android, incl.: Google Mobile Services, battery, 7600 mAh, protection class: IP65

€804.76

Special article: no cancellation or return possible!

This article has been removed from range!

Successor type available: Zebra ET401 (syet401-3)

€804.76

In stock 0
12 months warranty
Second-hand device
Zebra ET40, 2D, SE4100, 25.4 cm (10''), USB-C, BT, NFC, Android, GMS

(markt_62158 – ET40AB-001C1B0-A6)

Topseller
Tablet PC, 2D, imager (SE4100), screen size: 25.4 cm (10''), Touchscreen, resolution: 1920x1200 pixels, Camera (13 MP), front camera (5 MP), brightness 500cd, connection: USB-C, Bluetooth, Wi-Fi 6, NFC, Qualcomm Octa Core, 2.2 GHz, RAM: 4 GB, Flash: 64 GB, Android, incl.: Google Mobile Services, battery, 7600 mAh, protection class: IP65
In good condition with few signs of usage on the backside, incl. battery, charging station, power supply kit, power cord EU and rugged boot, Android 13, without original packaging.
Included: Power cord, C13, EU (kaltkabel)  /  Zebra ET4X Charging Cradle (syet41crd)  /  Zebra ET4X Rugged Boot (syet4boot)  /  Zebra DC cable (synt1250cab)  /  Zebra power supply (synt1250w)
Status:
Silver
In stock 1
No warranty
Zebra ET40, 2D, SE4100, 25.4 cm (10''), USB-C, BT, NFC, Android, GMS

(syet40-9 – ET40AB-001C2B0-A6)

Topseller
Tablet PC, 2D, imager (SE4100), screen size: 25.4 cm (10''), Touchscreen, 1920x1200 pixels, Camera (13 MP), front camera (5 MP), brightness 500cd, connection: USB-C, Bluetooth, Wi-Fi 6, NFC, Qualcomm Octa Core, 2.2 GHz, RAM: 8 GB, Flash: 128 GB, Android, incl.: Google Mobile Services, battery, 7600 mAh, protection class: IP65

€1,045.45

Special article: no cancellation or return possible!

€1,045.45

In stock 0
12 months warranty
Second-hand device
Zebra ET40, 2D, SE4100, 20.3 cm (8''), USB-C, BT, NFC, Android, GMS

(markt_64346 – ET40AA-001C1B0-A6)

Tablet PC, 2D, imager (SE4100), screen size: 20.3 cm (8''), Touchscreen, resolution: 1280x800 pixels, Camera (13 MP), front camera (5 MP), brightness 500cd, connection: USB-C, Bluetooth, Wi-Fi 6, NFC, Qualcomm Octa Core, 2.2 GHz, RAM: 4 GB, Flash: 64 GB, Android, incl.: Google Mobile Services, battery, 6150 mAh, protection class: IP65
In good condition with battery, Android 14, in original box.
Status:
Gold
In stock 1
8 months warranty
Zebra ET40, 2D, SE4100, 20.3 cm (8''), USB-C, BT, NFC, Android, GMS

(syet40-7 – ET40AA-001C2B0-A6)

Tablet PC, 2D, imager (SE4100), screen size: 20.3 cm (8''), Touchscreen, resolution: 1280x800 pixels, Camera (13 MP), front camera (5 MP), brightness 500cd, connection: USB-C, Bluetooth, Wi-Fi 6, NFC, Qualcomm Octa Core, 2.2 GHz, RAM: 8 GB, Flash: 128 GB, Android, incl.: Google Mobile Services, battery, 6150 mAh, protection class: IP65

€844.05

Special article: no cancellation or return possible!

This article has been removed from range!

Successor type available: Zebra ET401 (syet401-5)

€844.05

In stock 0
12 months warranty
Zebra ET40, 2D, SE4100, 25.4 cm (10''), USB-C, BT, NFC, Android, GMS

(syet40-8 – ET40AB-001C1BM-A6)

Tablet PC, 2D, imager (SE4100), screen size: 25.4 cm (10''), Touchscreen, resolution: 1920x1200 pixels, Camera (13 MP), front camera (5 MP), brightness 500cd, connection: USB-C, Bluetooth, Wi-Fi 6, NFC, Qualcomm Octa Core, 2.2 GHz, RAM: 4 GB, Flash: 64 GB, Android, incl.: MDNA Enterprise, Google Mobile Services, battery, 7600 mAh, protection class: IP65

€909.41

Special article: no cancellation or return possible!

€909.41

In stock 0
12 months warranty
Second-hand device
Zebra ET45, 2D, SE4710, 20.3 cm (8''), GPS, USB-C, BT, 5G, NFC, Android, GMS

(markt_53109 – ET45CA-101D1B0-A6)

Tablet PC, 2D, imager (SE4710), screen size: 20.3 cm (8''), Touchscreen, 1280x800 pixels, GPS, Camera (13MP), front camera (5MP), brightness 500cd, USB-C, Bluetooth, Wi-Fi 6, 5G, NFC, Qualcomm Octa Core, 2.2GHz, RAM: 4 GB, Flash: 64 GB, Android (11), incl.: Google Mobile Services, battery, 6150mAh, IP65
Fully functional, in ok. condition with signs of usage on the backside, including battery, charging station, power supply kit and power cords EU/UK, Android 14, without original packaging.
Included: Power cord, C13, EU (kaltkabel)  /  Zebra ET4X Charging Cradle (syet41crd)  /  Zebra power supply, kit (synt1250wkit)  /  Power cord, C13, UK (ukstromkab)
Status:
Bronze
In stock 1
No warranty
Second-hand device
Zebra ET45, 2D, SE4710, 20.3 cm (8''), GPS, USB-C, BT, 5G, NFC, Android, GMS

(markt_56596 – ET45CA-101D2B0-A6)

Tablet PC, 2D, imager (SE4710), screen size: 20.3 cm (8''), Touchscreen, 1280x800 pixels, GPS, Camera (13 MP), front camera (5 MP), brightness 500cd, connection: USB-C, Bluetooth, Wi-Fi 6, 5G, NFC, Qualcomm Octa Core, 2.2 GHz, RAM: 8 GB, Flash: 128 GB, Android, incl.: Google Mobile Services, battery, 6150 mAh, protection class: IP65
In good condition with battery, Android 13, original box.
Included: Zebra ET4X Rugged Boot (syet4boot2)  /  Zebra ET4X D-Clips (syet4dclip)  /  Zebra shoulder strap (systrap)
Status:
Silver
In stock 1
No warranty
Second-hand device
Zebra ET45, 2D, SE4710, 20.3 cm (8''), GPS, USB-C, BT, 5G, NFC, Android, GMS

(markt_55209 – ET45CA-101D2B0-A6)

Tablet PC, 2D, imager (SE4710), screen size: 20.3 cm (8''), Touchscreen, 1280x800 pixels, GPS, Camera (13 MP), front camera (5 MP), brightness 500cd, connection: USB-C, Bluetooth, Wi-Fi 6, 5G, NFC, Qualcomm Octa Core, 2.2 GHz, RAM: 8 GB, Flash: 128 GB, Android, incl.: Google Mobile Services, battery, 6150 mAh, protection class: IP65
Fully functional, in ok. condition, including battery and fixed expansion module with hand strap, Android 13, without original box.
Included: Zebra ET4X Expansion Back (syet48exback)
Status:
Bronze
In stock 1
No warranty
Zebra ET45, 2D, SE4710, 25.4 cm (10''), GPS, USB-C, BT, 5G, NFC, Android, GMS

(syet45-2 – ET45CB-101D1B0-A6)

Tablet PC, 2D, imager (SE4710), screen size: 25.4 cm (10''), Touchscreen, resolution: 1920x1200 pixels, GPS, Camera (13 MP), front camera (5 MP), brightness 500cd, connection: USB-C, Bluetooth, Wi-Fi 6, 5G, NFC, Qualcomm Octa Core, 2.2 GHz, RAM: 4 GB, Flash: 64 GB, Android, incl.: Google Mobile Services, battery, 7600 mAh, protection class: IP65

€961.73

Special article: no cancellation or return possible!

This article has been removed from range!

Successor type available: Zebra ET401 (syet401-8)

€961.73

In stock 0
12 months warranty
Zebra ET45, 2D, SE4710, 25.4 cm (10''), GPS, USB-C, BT, 5G, NFC, Android, GMS

(syet45-5 – ET45CB-101D2B0-A6)

Tablet PC, 2D, imager (SE4710), screen size: 25.4 cm (10''), Touchscreen, resolution: 1920x1200 pixels, GPS, Camera (13 MP), front camera (5 MP), brightness 500cd, connection: USB-C, Bluetooth, Wi-Fi 6, 5G, NFC, Qualcomm Octa Core, 2.2 GHz, RAM: 8 GB, Flash: 128 GB, Android, incl.: Google Mobile Services, battery, 7600 mAh, protection class: IP65

€1,066.38

Special article: no cancellation or return possible!

This article has been removed from range!

Successor type available: Zebra ET401 (syet401-8)

€1,066.38

In stock 0
12 months warranty
Zebra ET45, 2D, SE5500, 25.4 cm (10''), GPS, USB-C, BT, 5G, NFC, Android, GMS

(syet45-3 – ET45CB-101K2B0-A6)

Tablet PC, 2D, imager (SE5500), screen size: 25.4 cm (10''), Touchscreen, resolution: 1920x1200 pixels, GPS, Camera (13 MP), front camera (5 MP), brightness 500cd, connection: USB-C, Bluetooth, Wi-Fi 6, 5G, NFC, Qualcomm Octa Core, 2.2 GHz, RAM: 8 GB, Flash: 128 GB, Android, incl.: Google Mobile Services, battery, 7600 mAh, protection class: IP65

€1,568.70

Special article: no cancellation or return possible!

This article has been removed from range!

€1,568.70

In stock 0
12 months warranty
Second-hand device
Zebra ET45, 2D, SE5500, 25.4 cm (10''), GPS, USB-C, BT, 5G, NFC, Android, GMS

(markt_56935 – ET45CB-101K2B0-A6)

Tablet PC, 2D, imager (SE5500), screen size: 25.4 cm (10''), Touchscreen, resolution: 1920x1200 pixels, GPS, Camera (13 MP), front camera (5 MP), brightness 500cd, connection: USB-C, Bluetooth, Wi-Fi 6, 5G, NFC, Qualcomm Octa Core, 2.2 GHz, RAM: 8 GB, Flash: 128 GB, Android, incl.: Google Mobile Services, battery, 7600 mAh, protection class: IP65
Fully functional, in ok. condition with battery and rugged frame, Android 14, without original box.
Included: Zebra ET4X Rugged Boot (syet4boot)  /  Zebra ET4X Expansion Back (syet4exback)
Status:
Bronze
In stock 1
No warranty
Second-hand device
Zebra ET45, 2D, SE5500, 25.4 cm (10''), GPS, USB-C, BT, 5G, NFC, Android, GMS

(markt_62225 – ET45CB-101K2B0-A6)

Tablet PC, 2D, imager (SE5500), screen size: 25.4 cm (10''), Touchscreen, resolution: 1920x1200 pixels, GPS, Camera (13 MP), front camera (5 MP), brightness 500cd, connection: USB-C, Bluetooth, Wi-Fi 6, 5G, NFC, Qualcomm Octa Core, 2.2 GHz, RAM: 8 GB, Flash: 128 GB, Android, incl.: Google Mobile Services, battery, 7600 mAh, protection class: IP65
In good condition with few scratches on display and backside, includes battery, rugged boot and expansion module with hand strap, Android 13, without original packaging.
Included: Zebra ET4X Rugged Boot (syet4boot)  /  Zebra ET4X Expansion Back (syet4exback)
Status:
Bronze
In stock 1
3 months warranty
Second-hand device
Zebra ET45, 2D, SE5500, 25.4 cm (10''), GPS, USB-C, BT, 5G, NFC, Android, GMS

(markt_54773 – ET45CB-101K2B0-A6)

Tablet PC, 2D, imager (SE5500), screen size: 25.4 cm (10''), Touchscreen, resolution: 1920x1200 pixels, GPS, Camera (13 MP), front camera (5 MP), brightness 500cd, connection: USB-C, Bluetooth, Wi-Fi 6, 5G, NFC, Qualcomm Octa Core, 2.2 GHz, RAM: 8 GB, Flash: 128 GB, Android, incl.: Google Mobile Services, battery, 7600 mAh, protection class: IP65
In good condition with signs of usage on backside, incl. battery, EU USB charger, USB-C cable and rugged boot, Android 11, without original box.
Included: Zebra ET4X Rugged Boot (syet4boot)  /  Zebra power supply, EU (sytc51ps)  /  Zebra connection cable, USB-C (syusbaccab)
Status:
Bronze
In stock 1
No warranty

Accessories

Zebra power supply

(synt1250w – PWR-BGA12V50W0WW)

Power supply, 12 VDC, 4,16 A, connector: 4 pin, order separately: DC cable, power cord (C13)

€58.85

€58.85

In stock 3551
1 month warranty
Mobilis Screen Protector

(mob036276 – 036276)

Screen Protector, IK06, Anti-Shock, clean, fits for: ET40/ET45 (10'')

€33.33

Minimum order quantity: 320 pieces
Special article: no cancellation or return possible!

This article will be removed from range! Secure the last remainders of stock now!

€33.33

In stock 466
24 months warranty
Mobilis Screen Protector

(mob036288 – 036288)

Screen Protector, IK06, Clear, fits for: ET40/ET45 8"

€30.83

Special article: no cancellation or return possible!

This article will be removed from range! Secure the last remainders of stock now!

€30.83

In stock 60
24 months warranty
Mobilis Protective Case

(mob063022 – 063022)

Protective Case, incl.: rotating tripod and handle, fits for: ET40, ET45 (8")

€79.16

Minimum order quantity: 5 pieces

€79.16

In stock 20
24 months warranty
Second-hand device
Mobilis Protective Case

(markt_54816 – 063022)

Protective Case, incl.: rotating tripod and handle, fits for: ET40, ET45 (8")
In very good condition, in original packaging.
Status:
Gold
In stock 1
No warranty
Mobilis Protective Case

(mob063023 – 063023)

Protective Case, reinforced, Rotating Handle Tripod, fits for: ET40, ET45 (10")

€79.16

€79.16

In stock 17
24 months warranty
Mobilis Case

(mob065026 – 065026)

Case PROTECH, fits for: ET40, ET45 (8" devices)

€39.16

€39.16

In stock 23
12 months warranty
Mobilis Case

(mob065027 – 065027)

Case PROTECH, fits for: ET40, ET45 (10" devices)

€44.16

€44.16

In stock 2
12 months warranty
Brodit Module Upgrade

(brd216312 – 216312)

Module Upgrade, Key Lock Module, incl. 2 keys, for Mounts without Rugged Boot / Exoskeleton, fits for: ET40/ET45 (8'' and 10'')

€54.61

€54.61

In stock 0
12 months warranty
Brodit Module Upgrade

(brd216313 – 216313)

Module Upgrade, Spring Stud Lock, for Mounts without Rugged Boot / Exoskeleton, fits for: ET40/ET45 (8'' and 10'')

€46.21

€46.21

In stock 0
12 months warranty
Brodit Module Upgrade

(brd216316 – 216316)

Module Upgrade, Key Lock Module, incl. 2 keys, for Mounts with Rugged Boot / Exoskeleton, fits for: ET40/ET45 (8'' and 10'')

€54.61

€54.61

In stock 0
12 months warranty
Brodit Module Upgrade

(brd216317 – 216317)

Module Upgrade, Spring Stud Lock, for Mounts with Rugged Boot / Exoskeleton, fits for: ET40/ET45 (8'' and 10'')

€46.21

€46.21

In stock 0
12 months warranty
Brodit Active Table Stand

(brd216331 – 216331)

Active Table Stand, for 10'' and 8'' devices with or without Rugged Frame, fits for: ET40

€117.64

€117.64

In stock 0
12 months warranty
Brodit Active Holder

(brd216376 – 216376)

Active Holder, for devices without rugged boot, AMPS, VESA75, order separately: power supply, fits for: ET40, ET45 (8")

€126.04

€126.04

In stock 0
12 months warranty
Brodit Active Holder

(brd216377 – 216377)

Active Holder, for devices without rugged boot, AMPS, VESA75, order separately: power supply, USB-Host, fits for: ET40, ET45 (8")

€176.46

€176.46

In stock 0
12 months warranty
Brodit Active Holder

(brd216378 – 216378)

Active Holder, for devices with rugged boot, AMPS, VESA75, order separately: power supply, fits for: ET40, ET45 (8")

€126.04

€126.04

In stock 0
12 months warranty
Brodit Active Holder

(brd216379 – 216379)

Active Holder, for devices with rugged boot, AMPS, VESA75, order separately: power supply, USB-Host, fits for: ET40, ET45 (8")

€176.46

€176.46

In stock 0
12 months warranty
Brodit Active Holder

(brd216380 – 216380)

Active Holder, for devices with rugged boot and Zebra expansion back, order separately: power supply, fits for: ET40, ET45 (8")

€159.66

€159.66

In stock 0
12 months warranty
Brodit Active Holder

(brd216381 – 216381)

Active Holder, for devices with rugged boot and Zebra expansion back, order separately: power supply, USB-Host, fits for: ET40, ET45 (8")

€210.08

€210.08

In stock 0
12 months warranty
Brodit Active Holder

(brd216382 – 216382)

Active Holder, for devices without rugged boot, AMPS, VESA 75, order separately: power supply, fits for: ET40, ET45 (10")

€126.04

€126.04

In stock 0
12 months warranty
Brodit Active Holder

(brd216383 – 216383)

Active Holder, for devices without rugged boot, USB-Host, AMPS, VESA 75, order separately: power supply, fits for: ET40, ET45 (10")

€176.46

€176.46

In stock 0
12 months warranty
Brodit Active Holder

(brd216385 – 216385)

Active Holder, requires: rugged boot, AMPS, VESA 75x75, order separately: power supply, fits for: ET40, ET45 (10")

€176.46

€176.46

In stock 0
12 months warranty
Brodit Active Holder

(brd216386 – 216386)

Active Holder, fits devices with rugged boot and expansion back, fits for: ET40, ET45 (10")

€159.66

€159.66

In stock 0
12 months warranty
Brodit Mounting Kit

(brd243570 – 243570)

Mounting Kit, incl.: Table clamp, 2 x Mounting arm, passive mount for 10" ET4x

€159.66

€159.66

In stock 0
12 months warranty
Zebra attachable keyboard, US

(ett3ptygj-10 – 3PTY-GJ-7160-1789-00)

Attachable keyboard, Layout: US, fits for: ET40/45 (10") 

€187.79

€187.79

In stock 0
12 months warranty
Second-hand device
Zebra attachable keyboard, US

(markt_57957 – 3PTY-GJ-7160-1789-00)

Attachable keyboard, Layout: US, fits for: ET40/45 (10") 
In good condition, original box.
Status:
Gold
In stock 1
3 months warranty
Zebra attachable keyboard, UK

(ett3ptygj-4 – 3PTY-GJ-7160-1789-01)

Attachable keyboard, Layout: UK, fits for: ET40/45 (10") 

€187.79

€187.79

In stock 11
12 months warranty
Zebra attachable keyboard, DE

(ett3ptygj-9 – 3PTY-GJ-7160-1789-02)

Attachable keyboard, Layout: DE, fits for: ET40/45 (10") 

€187.79

€187.79

In stock 0
12 months warranty
Zebra attachable keyboard, FR

(ett3ptygj-11 – 3PTY-GJ-7160-1789-03)

Attachable keyboard, Layout: FR, fits for: ET40/45 (10") 

€187.79

€187.79

In stock 0
12 months warranty
Zebra attachable keyboard, SP

(ett3ptygj-12 – 3PTY-GJ-7160-1789-04)

Attachable keyboard, Layout: SP, fits for: ET40/45 (10") 

€187.79

€187.79

In stock 0
12 months warranty
Zebra Gamber Johnson vehicle charging-/communication station, USB

(ett3ptygj-5 – 3PTY-GJ-7160-1807-00)

Gamber Johnson vehicle charging-/communication station, interfaces: 2x USB-A, drilling: VESA 75 and AMPS, order separately: vehicle adapter, vehicle mounting, fits for: ET40/45 (10" with rugged boot)

€363.09

€363.09

In stock 0
12 months warranty
Zebra forklift power supply, 20-60VDC

(ett3ptygj-20 – 3PTY-GJ-7300-0467)

Forklift power supply, 20-60VDC, fits for: Gamber Johnson Cradles

€317.59

€317.59

In stock 0
12 months warranty
Zebra Screen protector, tempered glass

(syet4scrprot – 3PTY-INF-ZEB-ET4X10)

Zebra InfoCase Screen protector, tempered glass, fits for: ET4X (10 inch)

€35.49

€35.49

In stock 38
No warranty
Zebra ProClip Charge Only Vehicle Cradle, VESA, 10"

(syproclipcrd-8 – 3PTY-PCLIP-216384)

ProClip Charge Only Vehicle Cradle, VESA 75, AMPS, order separately: protective boot and power supply, fits for: ET4X (10")

€163.80

€163.80

In stock 0
No warranty
Zebra shoulder strap

(systrap – 58-40000-007R)

Shoulder strap, fits for: holster

€17.14

€17.14

In stock 60
3 months warranty
Brodit Passive Mount

(brd710320 – 710320)

Passive Mount, Module Upgrade, AMPS, VESA75 fits for: ET40/ET45 (10'') with rugged boot

€84.03

€84.03

In stock 3
12 months warranty
Second-hand device
Brodit Passive Mount

(markt_59642 – 710320)

Passive Mount, Module Upgrade, AMPS, VESA75 fits for: ET40/ET45 (10'') with rugged boot
In very good condition with original packaging.
Status:
Gold
In stock 1
6 months warranty
Brodit active holder, Zebra ET4x

(brd712320 – 712320)

Cigarette Lighter Adapter, fits for: Zebra ET4x 10'' with Rugged-Frame

€176.46

€176.46

In stock 1
12 months warranty
Second-hand device
Brodit active holder, Zebra ET4x

(markt_62960 – 712320)

Cigarette Lighter Adapter, fits for: Zebra ET4x 10'' with Rugged-Frame
In very good condition with original packaging.
Status:
Gold
In stock 1
4 months warranty
Brodit Active Mount

(brd712330 – 712330)

Active Mount, Cig-Plug, Module Upgrade Cradle, for devices with Rugged Boot / Exoskeleton / Zebra Original Expansion Back, fits for: ET40/ET45 (8'')

€210.08

€210.08

In stock 0
12 months warranty
Second-hand device
Brodit Active Mount

(markt_60429 – 712330)

Active Mount, Cig-Plug, Module Upgrade Cradle, for devices with Rugged Boot / Exoskeleton / Zebra Original Expansion Back, fits for: ET40/ET45 (8'')
In good condition with vehicle adapter.
Status:
Gold
In stock 1
6 months warranty
Brodit Active Mount

(brd712332 – 712332)

Active Mount, Cig-Plug, Module Upgrade Cradle, for devices with Rugged Boot / Exoskeleton / Zebra Original Expansion Back, fits for: ET40/ET45 (10'')

€210.08

€210.08

In stock 0
12 months warranty
Brodit Active Holder

(brd713326 – 713326)

Active Mount, Module-Upgrade Kit, fixed installation, for devices with rugged boot/exoskeleton, AMPS, VESA 75, Input: 12V-48V, Output: 12V 3A, fits for: ET40/ET45 (10'')

€243.69

€243.69

In stock 0
12 months warranty
Brodit Active Mount

(brd713330 – 713330)

Active Mount, fixed installation, open cable end, Module Upgrade Cradle, for devices with Rugged Boot / Exoskeleton / Zebra Original Expansion Back, fits for: ET40/ET45 (8'')

€218.48

€218.48

In stock 1
12 months warranty
Second-hand device
Brodit Active Mount

(markt_50834 – 713330)

Active Mount, fixed installation, open cable end, Module Upgrade Cradle, for devices with Rugged Boot / Exoskeleton / Zebra Original Expansion Back, fits for: ET40/ET45 (8'')
In good condition / no original packaging.
Status:
Gold
In stock 1
11 months warranty
Brodit Active Mount

(brd713332 – 713332)

Active Mount, fixed installation, Module Upgrade Cradle, for devices with Rugged Boot / Exoskeleton, fits for: ET40/ET45 (10'')

€226.88

€226.88

In stock 0
12 months warranty
Brodit Active Holder

(brd736324 – 736324)

Active Holder, for fixed installation, fits devices with Rugged Boot or exoskeleton, AMPS and VESA75, key-lock, USB-Host, fits for: ET40, ET45

€285.71

€285.71

In stock 0
12 months warranty
Brodit Active Holder, fixed installation

(brd736326 – 736326)

Active Holder, fixed installation, requires rugged boot, VESA 75, AMPS, 12V DC, USB Host, lockable, includes two keys, fits for: ET40, ET45 (10")

€294.11

€294.11

In stock 33
12 months warranty
Brodit Active Holder with lock

(brd736333 – 736333)

Active Holder with lock, for fixed installation, for devices with rugged boot, compatible with expansion back, fits for: ET40, ET45 (10")

€327.72

€327.72

In stock 0
12 months warranty
Brodit Passive Mount

(brd739317 – 739317)

Passive Mount, Module Upgrade, Lock incl. 2 keys, AMPS, VESA75 fits for: ET40/ET45 (8'')

€126.04

€126.04

In stock 0
12 months warranty
Brodit Passive Mount

(brd739318 – 739318)

Passive Mount, Module Upgrade, Lock incl. 2 keys, compatible with Rugged Boot or Exoskeleton, AMPS, VESA75 fits for: ET40/ET45 (8'')

€126.04

€126.04

In stock 0
12 months warranty
Brodit Passive Mount

(brd739320 – 739320)

Passive Mount, Module Upgrade, Lock incl. 2 keys, compatible with Rugged Boot or Exoskeleton, AMPS, VESA75 fits for: ET40/ET45 (10'')

€134.45

€134.45

In stock 0
12 months warranty
Brodit Passive Holder, Lockable

(brd739332 – 739332)

Passive Holder, Lockable, requires protective boot, incl. two keys, AMPS, VESA 75, fits for: ET4x (10")

€168.06

€168.06

In stock 0
12 months warranty
Brodit Active Holder, fixed installation

(brd747333 – 747333)

Active Holder, fixed installation, spring-lock, requires rugged boot, fits for: ET40, ET45 (10")

€319.32

€319.32

In stock 0
12 months warranty
Zebra T adapter (10"), pack of 4

(syet4xtada – ADP-ET4X-10T4S1-04)

T adapter, pack of 4, for 10'' tablets, fits for: multi slot cradles

€57.34

€57.34

In stock 0
3 months warranty
Zebra T adapter, pack of 4

(syet4xtada8 – ADP-ET4X-8T4S1-04)

T adapter, pack of 4, for 8'' tablets, fits for: multi slot cradles

€57.34

€57.34

In stock 1
1 month warranty
Zebra Mounting Plate

(syet4xmbrack – BRKT-ET4X-DSKPS-01)

Mounting Plate for Counter/Desk, covers USB- and Power Interfaces, fits for: ET4X Presentation Stand

€16.52

€16.52

In stock 0
3 months warranty
Zebra spare battery

(syet4xbat – BTRY-ET4X-10IN1-01)

Spare battery, 7600 mAh, fits for: ET4X (10'')

€144.82

€144.82

In stock 83
3 months warranty
Zebra spare battery

(syet4xbat8 – BTRY-ET4X-8IN1-01)

Spare battery, 6100 mAh, fits for: ET4X (8'')

€125.38

€125.38

In stock 0
3 months warranty
Zebra PowerPack

(syet50bat2 – BTRY-ET5X-PRPK2-01)

PowerPack battery, order separately: expansion module, fits for: ET5X, ET4X

€258.27

€258.27

In stock 366
3 months warranty
Second-hand device
Zebra PowerPack

(markt_61117 – BTRY-ET5X-PRPK2-01)

PowerPack battery, order separately: expansion module, fits for: ET5X, ET4X
In good condition with original box.
Status:
Silver
In stock 1
No warranty
Second-hand device
Zebra PowerPack

(markt_48544 – BTRY-ET5X-PRPK2-01)

PowerPack battery, order separately: expansion module, fits for: ET5X
In good condition without original box.
Status:
Silver
In stock 1
No warranty
Second-hand device
Zebra PowerPack

(markt_47848 – BTRY-ET5X-PRPK2-01)

PowerPack battery, order separately: expansion module, fits for: ET5X
In good condition without original box.
Status:
Silver
In stock 1
No warranty
Zebra ET4X DC Cable

(syet4dcl – CBL-DC-388A2-01)

DC Line Cord for Presentation Stand

€12.29

€12.29

In stock 71
3 months warranty
Zebra ET4X Charging Cradle

(syet41crd – CRD-ET4X-1SCG1-01)

ET4X 1-Slot Charging Cradle, no data transfer, order separately: Power Supply, DC-Cable and AC-Cable, fits for: ET40, ET45, ET401

€272.30

€272.30

In stock 384
3 months warranty
Second-hand device
Zebra ET4X Charging Cradle

(markt_62226 – CRD-ET4X-1SCG1-01)

ET4X 1-Slot Charging Cradle, no data transfer, order separately: Power Supply, DC-Cable and AC-Cable, fits for: ET40 / ET45
Like new, includes power supply kit and power cord EU, in original box.
Included: Power cord, C13, EU (kaltkabel)  /  Zebra DC cable (synt1250cab)  /  Zebra power supply (synt1250w)
Status:
Gold
In stock 1
No warranty
Second-hand device
Zebra ET4X Charging Cradle

(markt_60313 – CRD-ET4X-1SCG1-01)

ET4X 1-Slot Charging Cradle, no data transfer, order separately: Power Supply, DC-Cable and AC-Cable, fits for: ET40 / ET45
In good condition with power supply kit and power cord EU, original box slightly damaged.
Included: Power cord, C13, EU (kaltkabel)  /  Zebra DC cable (synt1250cab)  /  Zebra power supply (synt1250w)
Status:
Bronze
In stock 1
No warranty
Second-hand device
Zebra Workstation Connect

(markt_53634 – CRD-ET4X-1SNWS-01)

Workstation Connect Cradle, HDMI, Ethernet, 4x USB, 3,5mm Headset Jack, compatible with and without rugged boot, not compatible with Expansion Back, order separately: Power Supply, Power Cord, fits for: ET4X
In good condition incl. power supply kit and power cord EU, original box.
Included: Power cord, C13, EU (kaltkabel)  /  Zebra DC cable (synt1250cab)  /  Zebra power supply (synt1250w)
Status:
Gold
In stock 1
No warranty
Second-hand device
Zebra Workstation Connect

(markt_50442 – CRD-ET4X-1SNWS-01)

Workstation Connect Cradle, HDMI, Ethernet, 4x USB, 3,5mm Headset Jack, compatible with and without rugged boot, not compatible with Expansion Back, order separately: Power Supply, Power Cord, fits for: ET4X
In good condition incl. power supply kit and power cords EU/UK, original box slightly damaged.
Included: Power cord, C13, EU (kaltkabel)  /  Zebra ET4X DC Cable (syet4dcl)  /  Zebra power supply (synt1250w)  /  Power cord, C13, UK (ukstromkab)
Status:
Silver
In stock 1
No warranty
Zebra Workstation Connect Cradle

(syet41ccrd-5 – CRD-ET4X-1SNWS-02)

Workstation Connect Cradle, 1x HDMI, 1x Ethernet, 4x USB Type A, 3.5mm Headset Jack, requires MDNA Enterprise license on device to support Zebra Workstation Connect Software features, order separately: Power Supply, AC and DC cable, fits for: ET4X

€578.33

€578.33

In stock 6
1 month warranty
Zebra ET4X 4-Slot Charging Cradle

(syet44chgcrd – CRD-ET4X-4S10I1-01)

ET4X 4-Slot Charging Cradle, no data transfer, order separately: Power Supply, DC-Cable and AC-Cable, fits for: 10'' ET40 / ET45, 10'' ET40HC / ET45HC / ET401

€808.82

€808.82

In stock 23
3 months warranty
Second-hand device
Zebra ET4X 4-Slot Charging Cradle

(markt_43984 – CRD-ET4X-4S10I1-01)

ET4X 4-Slot Charging Cradle, no data transfer, order separately: Power Supply, DC-Cable and AC-Cable, fits for: 10'' ET40 / ET45, 10'' ET40HC / ET45HC
In good condition with original box.
Status:
Silver
In stock 1
1 month warranty
Second-hand device
Zebra ET4X 4-Slot Charging Cradle

(markt_54112 – CRD-ET4X-4S10I1-01)

ET4X 4-Slot Charging Cradle, no data transfer, order separately: Power Supply, DC-Cable and AC-Cable, fits for: 10'' ET40 / ET45, 10'' ET40HC / ET45HC
very good condition / in original packaging4x holder in grey
Status:
Gold
In stock 1
No warranty
Second-hand device
Zebra ET4X 4-Slot Charging Cradle

(markt_57314 – CRD-ET4X-4S10I1-01)

ET4X 4-Slot Charging Cradle, no data transfer, order separately: Power Supply, DC-Cable and AC-Cable, fits for: 10'' ET40 / ET45, 10'' ET40HC / ET45HC
without cabel, in original box, in good condition
Status:
Silver
In stock 1
2 months warranty
Zebra ET4X 4-Slot Charging Cradle

(syet44chgcrd2 – CRD-ET4X-4S8I1-01)

ET4X 4-Slot Charging Cradle, no data transfer, order separately: Power Supply, DC-Cable and AC-Cable, fits for: 8'' ET40, ET45, ET401

€808.82

€808.82

In stock 10
1 month warranty
Second-hand device
Zebra ET4X 4-Slot Charging Cradle

(markt_52528 – CRD-ET4X-4S8I1-01)

ET4X 4-Slot Charging Cradle, no data transfer, order separately: Power Supply, DC-Cable and AC-Cable, fits for: 8'' ET40 / ET45
Fully functional, including power supply kit and power cord EU, in original box.
Included: Power cord, C13, EU (kaltkabel)  /  Zebra DC cable (sydc-7)  /  Zebra power supply (synt12108w)
Status:
Silver
In stock 1
No warranty
Zebra Cradle Convertion Cup

(syet4xcrdcup – CRDCUP-4S-ET5TOET4)

ET4X Four Slot Cradle Convertion Cup Kit for change from ET5X ShareCradle, includes one cup, order separately: T-adapter

€102.17

€102.17

In stock 0
3 months warranty
Android Zero Touch Registration License by Jarltech

(jtbindszt – jtbindszt)

Android Zero Touch Registration License for one device

€9.42

€9.42

Available
No warranty
Zebra tether

(sytc7xtether – KT-TC7X-TETHR1-03)

Set of three wrapped tethers for pen.

€36.04

€36.04

In stock 8
12 months warranty
Zebra Battery Door 10"

(syet4batcov – MISC-ET4X-BTDPS-01)

Battery Door with Presentation Stand, fits for: ET4x (10")

€73.71

€73.71

In stock 0
3 months warranty
Zebra Battery Door Adapter

(syet4x – MISC-ET4X-PBTDS-01)

Zebra Battery Door Adapter for presentation stand in portrait orientation, fits for: ET4x 10"

€72.35

€72.35

In stock 0
3 months warranty
RAM-GDS-DOCK-ZE20PD2U.jpg
RAM Mounts GDS EZ-Roll'r Holder for Zebra ET40/45 (8")

(ramgdsdock-2 – RAM-GDS-DOCK-ZE20PD2U)

This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-GDS-DOCK-ZE20PD2U:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-ZE20PD2U holder is supplied.

€179.19

€179.19

In stock 3
36 months warranty
RAM-GDS-DOCK-ZE20PDU.jpg
RAM Mounts GDS EZ-Roll'r Holder for Zebra ET40/45 (8")

(ramgdsdock-3 – RAM-GDS-DOCK-ZE20PDU)

This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-GDS-DOCK-ZE20PDU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-ZE20PDU holder is supplied.

€169.20

€169.20

In stock 3
36 months warranty
RAM-GDS-DOCK-ZE20PU.jpg
RAM Mounts GDS EZ-Roll'r Holder for Zebra ET40/45 (8")

(ramgdsdock-28 – RAM-GDS-DOCK-ZE20PU)

This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-GDS-DOCK-ZE20PU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Input Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-ZE20PU holder is supplied.

€115.60

€115.60

In stock 1
36 months warranty
RAM-GDS-DOCK-ZE21PD2U.jpg
RAM Mounts GDS EZ-Roll'r Holder for Zebra ET40/45 (10")

(ramgdsdock-4 – RAM-GDS-DOCK-ZE21PD2U)

This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-GDS-DOCK-ZE21PD2U:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-ZE21PD2U holder is supplied.

€178.72

€178.72

In stock 0
36 months warranty
RAM-GDS-DOCK-ZE21PDU.jpg
RAM Mounts GDS EZ-Roll'r Holder for Zebra ET40/45 (10")

(ramholder106 – RAM-GDS-DOCK-ZE21PDU)

This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-GDS-DOCK-ZE21PDU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-ZE21PDU holder is supplied.

€168.83

€168.83

In stock 0
36 months warranty
RAM-GDS-DOCK-ZE21PU.jpg
RAM Mounts GDS EZ-Roll'r Holder for Zebra ET40/45 (10")

(ramgdsdock-5 – RAM-GDS-DOCK-ZE21PU)

This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-GDS-DOCK-ZE21PU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Input Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-ZE21PU holder is supplied.

€115.09

€115.09

In stock 5
36 months warranty
RAM-GDS-DOCKL-ZE20PD2U.jpg
RAM Mounts GDS Form-Fit Holder (Key-Locking) for Zebra ET40/45 (8")

(ramholder81 – RAM-GDS-DOCKL-ZE20PD2U)

This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-GDS-DOCKL-ZE20PD2U:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Lockable with Keys
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-ZE20PD2U holder is supplied.

€215.93

€215.93

In stock 0
36 months warranty
RAM-GDS-DOCKL-ZE20PDU.jpg
RAM Mounts GDS Form-Fit Holder (Key-Locking) for Zebra ET40/45 (8")

(ramholder110 – RAM-GDS-DOCKL-ZE20PDU)

This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-GDS-DOCKL-ZE20PDU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Lockable with Keys
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-ZE20PDU holder is supplied.

€206.78

€206.78

In stock 0
36 months warranty
RAM-GDS-DOCKL-ZE20PU.jpg
RAM Mounts GDS Form-Fit Holder (Key-Locking) for Zebra ET40/45 (8")

(ramgdsdock-26 – RAM-GDS-DOCKL-ZE20PU)

This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-GDS-DOCKL-ZE20PU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Lockable with Keys
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Input Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-ZE20PU holder is supplied.

€152.88

€152.88

In stock 0
36 months warranty
RAM-GDS-DOCKL-ZE21PD2U.jpg
RAM Mounts GDS Form-Fit Holder (Key-Locking) for Zebra ET40/45 (10")

(ramgdsdock-6 – RAM-GDS-DOCKL-ZE21PD2U)

This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-GDS-DOCKL-ZE21PD2U:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Lockable with Keys
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-ZE21PD2U holder is supplied.

€221.38

€221.38

In stock 0
36 months warranty
RAM-GDS-DOCKL-ZE21PDU.jpg
RAM Mounts GDS Form-Fit Holder (Key-Locking) for Zebra ET40/45 (10")

(ramholder96 – RAM-GDS-DOCKL-ZE21PDU)

This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-GDS-DOCKL-ZE21PDU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Lockable with Keys
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-ZE21PDU holder is supplied.

€212.99

€212.99

In stock 0
36 months warranty
RAM-GDS-DOCKL-ZE21PU.jpg
RAM Mounts GDS Form-Fit Holder (Key-Locking) for Zebra ET40/45 (10")

(ramgdsdock-7 – RAM-GDS-DOCKL-ZE21PU)

This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-GDS-DOCKL-ZE21PU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Lockable with Keys
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Input Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-ZE21PU holder is supplied.

€158.58

€158.58

In stock 0
36 months warranty
RAM-GDS-DOCKNLL-ZE20PU.jpg
RAM Mounts GDS Form-Fit Holder (Latch) for Zebra ET40/45 (8")

(ramgdsdock-17 – RAM-GDS-DOCKNLL-ZE20PU)

This RAM Mounts GDS Form-Fit (Latch) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-GDS-DOCKNLL-ZE20PU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
With Latch
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Input Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKNLL-ZE20PU holder is supplied.

€127.76

€127.76

In stock 0
36 months warranty
RAM-GDS-DOCKNLL-ZE21PU.jpg
RAM Mounts GDS Form-Fit Holder (Latch) for Zebra ET40/45 (10")

(ramgdsdock-18 – RAM-GDS-DOCKNLL-ZE21PU)

This RAM Mounts GDS Form-Fit (Latch) holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-GDS-DOCKNLL-ZE21PU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
With Latch
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Input Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKNLL-ZE21PU holder is supplied.

€131.53

€131.53

In stock 0
36 months warranty
RAM-HOL-ZE20PD2KLU.jpg
RAM Mounts Form-Fit Holder (key-locking) for Zebra ET40/45 (8")

(ramholder8 – RAM-HOL-ZE20PD2KLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET4x 8“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE20PD2KLU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Lockable with key
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20LU.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCKL-ZE20PD2U.

Devices shown are not included in the delivery.
Only the RAM-HOL-ZE20PD2KLU holder is supplied.

€184.41

€184.41

In stock 8
36 months warranty
RAM-HOL-ZE20PD2U.jpg
RAM Mounts EZ-Roll'r Holder for Zebra ET40/45 (8")

(ramholder7 – RAM-HOL-ZE20PD2U)

This RAM Mounts EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE20PD2U:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, FCC, WEEE, CE & UKCA
Additional informations:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20U.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCK-ZE20PD2U.

Devices shown are not included in the delivery.
Only the RAM-HOL-ZE20PD2U holder is supplied.

€146.09

€146.09

In stock 13
36 months warranty
RAM-HOL-ZE20PDKLU.jpg
RAM Mounts Form-Fit Holder (key-locking) for Zebra ET40/45 (8")

(ramholder79 – RAM-HOL-ZE20PDKLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET4x 8“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE20PDKLU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Lockable with key
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20LU.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCKL-ZE20PDU.

Devices shown are not included in the delivery.
Only the RAM-HOL-ZE20PDKLU holder is supplied.

€165.41

€165.41

In stock 0
36 months warranty
RAM-HOL-ZE20PDU.jpg
RAM Mounts EZ-Roll'r Holder for Zebra ET40/45 (8")

(ramholder99 – RAM-HOL-ZE20PDU)

This RAM Mounts EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE20PDU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional informations:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20U.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCK-ZE20PDU.

Devices shown are not included in the delivery.
Only the RAM-HOL-ZE20PDU holder is supplied.

€123.40

€123.40

In stock 0
36 months warranty
RAM-HOL-ZE20PKLU.jpg
RAM Mounts EZ-Roll’r Holder (key-locking) for Zebra ET40/45 (8")

(ramholder83 – RAM-HOL-ZE20PKLU)

This RAM Mounts EZ-Roll‘r (key-locking) holder is suitable for Zebra ET4x 8“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE20PKLU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Lockable with key
Input Connector: 5.5mm DC
Input Cable Length: ca. 100 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20LU.

Devices shown are not included in the delivery.
Only the RAM-HOL-ZE20PKLU holder is supplied.

€164.38

€164.38

In stock 0
36 months warranty

Data sheet & more

Offers and indicated delivery times are not binding and only valid for resellers. Prices are in EUR, exclusive of VAT and subject to change. Errors excepted.

* The discount refers to the original sales price.

* The reduced price is only valid for current stock, provided that it is available.

NEW! Favourite your articles!

Your list of favourite articles can be found in your user menu under "Favourites".

Got it

CEO ONLINE – Ask me anything!

Open the chat dialogue, start a new conversation and select CEO under Department.