Przejdź do treści
Zebra ET51/ET56

Reliable, long-lasting tablets for every work environment

from

€1,227.90

(recommended retail price)
  • Robust enterprise tablets for office and field staff
  • Available with a 8.4'' or 10.1'' multi-touch display with Gorilla Glass
  • Intel quad-core processor and 4 GB RAM
  • Reliable connectivity: WLAN, GPS, Bluetooth, LTE (ET56)
  • Operating system: Android
1397

Description

The Zebra ET51/ET56 tablets combine the chic appearance of a consumer device with the necessary reliability of an enterprise tablet, and bridge the gap between the short-lived end consumer segment and the highly durable tablet area in the high price segment. With numerous expansion options, the elegant enterprise tablets cover a large working environment – perfect for use in the fields of transportation and logistics, field service not to mention in retail stores.

Both the compact 8.4'' and the 10.1'' display are readable in nearly any lighting conditions and also seamlessly react when wet or when the user is wearing gloves. The impact-resistant, scratch-proof Corning Gorilla Glass protects the tablets’ most sensitive components. The ET51/ET56 is IP65-certified against dust and jet water. Plus, it withstands impacts and shocks, making it practical for usage in a vehicle (from a forklift in the warehouse up to delivery trucks on the road).

For good native wireless communication the tablets convince with reliable wireless support (802.11ac/r/k/v), GPS and Bluetooth 4.2. For use in the field the ET56 offers full WWAN connectivity with a high data rate in the LTE standard. The rapid Apollo Lake quad-core processor with 1.6 GHz and 4 GB of DDR4 RAM thereby processes large amounts of data at a high speed. Another advantage: the processor minimises energy consumption and increases the life cycle of the battery.

On the rear of the tablets there is a practical 8 megapixel colour camera. Via the 2 megapixel front camera it is possible to video conference via WLAN or mobile networks. This way, users are ensured immediate help and support from external experts, colleagues or bosses. With the expansion module with a scan engine, they capture nearly every 1D or 2D barcode, no matter what condition it is in - damaged, dirty or poorly printed.

The tablets are also optionally available with Android. In these versions, they feature a higher resolution, a 13 megapixel colour camera on the back and a built-in 5 megapixel front camera. A Qualcomm Snapdragon 660 Octa-core processor with 2.2 GHz and 32 GB of flash memory process large amounts of data at high speed, while the powerful 6,440 mAh lithium polymer battery ensures long operating times. The interfaces include Bluetooth 5.0, WLAN (802.11 ac) and a USB-C interface. The 10.1" version also offers 2x2 MIMO, 4G LTE, as well as GPS, GLONASS, Galileo and Beidou support. The 8" version, on the other hand, is available with an integrated barcode scanner, as needed. Thanks to PRZM technology, it even captures damaged or dirty 1D/2D barcodes reliably and quickly.

As needed, the Android version is also available as an 8'' variant with an integrated barcode scanner. Thanks to PRZM technology, it even captures damaged or dirty 1D/2D barcodes reliably and quickly.

With the versatile accessories they expand not only the tablet itself, but also the application areas of the ET51/ET56. The Android versions are also supported by Zebra Mobility DNA.

Accessories

Accessory Category
Main image file
PWR-BGA12V50W0WW.png
Zasilacz Zebra

(synt1250w – PWR-BGA12V50W0WW)

Zasilacz, 12 VDC, 4,16 A, złącze: 4-pin, zamów osobno: kabel DC, kabel zasilający (C13)

€58.85

€58.85

W magazynie 1207
1 month warranty
Mobilis shoulder strap

(mobsstrap – 001027)

Safety carry shoulder strap

€17.49

€17.49

W magazynie 64
24 months warranty
Mobilis D-Rings

(mob001089 – 001089)

Universal Hypalon D-Rings, 4 peaces

€9.95

€9.95

W magazynie 45
12 months warranty
Mobilis screen protector, IK06, ET5X (10.1'')

(mob036174 – 036174)

Screen protector, Anti-Shock IK06, Hardness: 5H, Clear, Easy set up (bubble free), fits for: ET5X (10.1'')

€31.66

Special article: no cancellation or return possible!

This article will be removed from range! Secure the last remainders of stock now!

€31.66

W magazynie 18
24 months warranty
Mobilis protective case

(mob067005 – 067005)

Protective case, incl.: kick stand, hand strap (rotating), fits for: ET51/56 (10.1'')

€51.66

€51.66

W magazynie 2
24 months warranty
Brodit Charging Module, USB

(brd216230 – 216230)

Charging Module with USB-A Host and DC connector 5,5x5,1-1,5mm for Module Upgrade holders, no cables included, fits for: ET50, ET51, ET55, ET56

€159.66

Special article: no cancellation or return possible!

€159.66

W magazynie 0
12 months warranty
Brodit voltage converter

(brd216240 – 216240)

Voltage converter, 48 VAC, 12 VDC, fits for: ET5X

€138.65

Special article: no cancellation or return possible!

€138.65

W magazynie 0
12 months warranty
Brodit extension plate

(brd216250 – 216250)

Extension plate, fit for: Zebra ET5X 8.4'' Module Upgrade

€16.80

Special article: no cancellation or return possible!

€16.80

W magazynie 0
12 months warranty
Brodit extension plate

(brd216251 – 216251)

Extension plate, fit for: Zebra ET5X 10.1'' Module Upgrade

€16.80

Special article: no cancellation or return possible!

€16.80

W magazynie 0
12 months warranty
Brodit USB-Hub for ET5x

(brd216258 – 216258)

USB-Hub for ET5x, 3x USB-A, 1x Ethernet, fits for: Module upgrade cradles

€84.03

Special article: no cancellation or return possible!

€84.03

W magazynie 0
12 months warranty
Main image file
25-124330-01R.jpg
Kabel Zebra Micro USB

(symc9500cabu – 25-124330-01R)

Kabel Micro USB, ActiveSync, długość: 1,22m, pasuje do: ładowarek/stacji nadawczych Zebra

€12.02

€12.02

W magazynie 185
3 months warranty
Main image file
50-16000-671R.png
Zebra power cord, C13, IT

(syacabit – 50-16000-671R)

Power cord, C13, Italy, length: 1.8 m, colour: black

€18.03

€18.03

W magazynie 87
1 month warranty
Brodit charging station (MOLEX), ET5X (10'') (protective case)

(brd510892 – 510892)

Charging station (MOLEX), fits for: ET5X (10'') (protective case)

€302.51

Special article: no cancellation or return possible!

€302.51

W magazynie 0
12 months warranty
Main image file
58-40000-007R.jpg
Pasek na ramię Zebra

(systrap – 58-40000-007R)

Szelka na ramię, pasuje do: futerału

€17.14

€17.14

W magazynie 2599
3 months warranty
Zebra ET5x charging cradle

(brd736267 – 736267)

ET5x charging cradle, 2 keys, for robust frame, with/without Exp. Modules. USB-A Host+DC5,5x5,1-1,5mm (no cable included).

€327.72

Special article: no cancellation or return possible!

€327.72

W magazynie 2
12 months warranty
Zebra ET5x 10.1 Module Upgrade

(brd739266 – 739266)

Zebra ET5x Passiv Mount lockable, 10.1 Module Upgrade, 2 keys included, for robust frame, with/without expansion module/handstrap. AMPS+VESA 75 holes. Module Upgrade Cradle.

€176.46

Special article: no cancellation or return possible!

€176.46

W magazynie 0
12 months warranty
Zebra ET5x Passiv Mount

(brd739267 – 739267)

Zebra ET5x Passiv Mount, 8.4 Module Upgrade, 2 keys included, for robust frame, with/without expansion module/handstrap. AMPS+VESA 75 holes. Module Upgrade Cradle.

€176.46

Special article: no cancellation or return possible!

€176.46

W magazynie 8
12 months warranty
Brodit Holder for Zebra ET5X

(brd741266 – 741266)

Brodit bracket with lock, compatible with Rugged Frame and with/without Expansion Module/Handstrap, with MPS, VESA 75, for Zebra 10'' ET50, ET51, ET55, ET56

€168.06

Special article: no cancellation or return possible!

€168.06

W magazynie 0
12 months warranty
Brodit Active Mount

(brd747267 – 747267)

Active Mount, for devices with Rugged Frame, with or without expansion module / handstrap, order separately: power supply, USB-A Host, Upgrade Module, fits for: ET5x (8'')

€310.92

Special article: no cancellation or return possible!

€310.92

W magazynie 0
12 months warranty
Main image file
BRKT-SCRD-SMRK-01.png
Uchwyt ścienny Zebra

(sytc8000mount – BRKT-SCRD-SMRK-01)

Uchwyt do montażu ściennego, pasuje do: stacji ładujących, stacji ładujących/komunikacyjnych 5-gniazdowych

€185.36

€185.36

W magazynie 34
1 month warranty
Zebra spare battery

(syet5xbat10-3 – BTRY-ET5X-10IN3-02)

Spare battery, 4950 mAh, internal battery, fits for: ET51/ET56 (10 inch, Windows)

€117.16

€117.16

W magazynie 27
No warranty
Zebra spare battery

(syet51exbat – BTRY-ET5X-10IN5-01)

Spare battery, extended, 9660 mAh, fits for: ET51/ET56 (10'' Android)

€152.56

€152.56

W magazynie 89
12 months warranty
Zebra spare battery, 6440 mAh

(syet5xbatp8 – BTRY-ET5X-8IN5-01)

Spare battery, 6440 mAh, fits for: ET51/ET56 (8'', Android)

€134.54

€134.54

W magazynie 1
No warranty
Zebra PowerPack

(syet50bat2 – BTRY-ET5X-PRPK2-01)

PowerPack battery, order separately: expansion module, fits for: ET5X, ET4X

€258.27

€258.27

W magazynie 333
3 months warranty
Zebra connection cable, RS-232

(sycabr71 – CBA-R71-C09ZAR)

Connection cable, RS-232, length: 2.7 m, coiled, power on PIN 9, TxD on PIN 2

€84.04

€84.04

W magazynie 96
1 month warranty
Zebra connection cable, RS-232, freezer

(sycabrf2 – CBA-RF2-C09ZAR)

Connection cable, RS-232, freezer, length: 2.7 m, coiled, power on PIN 9, TxD on PIN 2

€64.66

€64.66

W magazynie 56
1 month warranty
Zebra connection cable, USB

(sycabu09 – CBA-U09-C15ZAR)

Connection cable, USB, length: 4.5 m, coiled, cable code: U09

€96.98

€96.98

W magazynie 134
1 month warranty
Zebra connection cable, USB

(sycabu12 – CBA-U12-C09ZAR)

Connection cable, USB, length: 2.7 m, coiled, cable code: U12

€34.47

€34.47

W magazynie 214
1 month warranty
Zebra connection cable, USB, freezer

(sycabuf6 – CBA-UF6-C12ZAR)

Connection cable, USB, shielded, freezer, length: 3.65 m, coiled

€96.98

€96.98

W magazynie 93
1 month warranty
Main image file
CBL-DC-381A1-01.png
Kabel zasilający Zebra

(sydc-8 – CBL-DC-381A1-01)

Kabel DC, złącze (zasilacz: 8-pinowe / stacja: 4-pinowe), pasuje do: stacji wielogniazdowej

€31.24

€31.24

W magazynie 1265
1 month warranty
Kabel prądowy Zebra

(sydc-7 – CBL-DC-382A1-01)

Kabel DC, złącze (zasilanie: 8 pinów / stacja 4 piny), wydłużona zapadka zwalniająca, pasuje do: stacja wielokrotnego ładowania

€31.24

€31.24

W magazynie 268
1 month warranty
Main image file
CBL-DC-388A1-01.jpg
Kabel zasilający Zebra

(synt1250cab – CBL-DC-388A1-01)

Kabel zasilający DC, złącze (zasilanie: 4-pinowe / stacja 1-pinowe), pasuje do: stacja 1-slotowa, stacja 4-slotowa na baterie

€10.80

€10.80

W magazynie 2322
1 month warranty
Zebra adaptor plug, EU

(syadapt-eu – CN-000803-05)

Adaptor clip for power supply, EU

€10.46

€10.46

W magazynie 0
No warranty
Zebra adapter, UK

(syadapt-uk – CN-000803-06)

Adapter clip for power supply, UK

€10.46

€10.46

W magazynie 0
No warranty
Zebra charging station

(syet5xslot – CRD-ET5X-1SCG2)

Charging station, order separately: power supply, DC cable, power cord, fits for: ET5X

€243.26

€243.26

W magazynie 39
12 months warranty
Zebra charging station, 4 slots

(syet5xcha-2 – CRD-ET5X-SE4CO3-01)

Charging station, 4 slots, order separately: power supply, DC cable, power cord, fits for: ET5X

€801.58

€801.58

W magazynie 0
12 months warranty
Licencja rejestracyjna Android Zero Touch firmy Jarltech

(jtbindszt – jtbindszt)

Licencja rejestracji Android Zero Touch dla jednego urządzenia

€9.42

€9.42

Dostępne
No warranty
Zasilacz Zebra, zestaw

(synt1250wkit – KIT-PWR-12V50W)

Zasilacz (PWR-BGA12V50W0WW), 12 VDC, 4,16 A, złącze: 4-pinowe, w zestawie: kabel DC (CBL-DC-388A1-01) (zasilacz: 4-pinowy, stacja 1-pinowa), zamów osobno: przewód zasilający (C13)

€69.68

€69.68

W magazynie 1207
12 months warranty
Zebra connection cable, USB

(ettqln320ucab – P1031365-055)

Connection cable, USB (A/mini), strain relief, fits for: ZQ600, QLn220, QLn320, QLn420

€28.93

€28.93

W magazynie 38
1 month warranty
Zebra power supply

(ettzq51dc – P1063406-030)

Power supply, DC-DC, open ended cable, 12-24V, fits for: vehicle dock, ZQ500, ZQ600, QLn220, QLn320, QLn420

€52.63

€52.63

W magazynie 68
1 month warranty
Zebra power supply

(ettzq51dc2 – P1063406-031)

Power supply, DC-DC, with cigarette lighter adapter, 12-24V, fits for: ZQ500, ZQ600, QLn220, QLn320, QLn420, vehicle dock

€52.63

€52.63

W magazynie 0
1 month warranty
Main image file
PWR-BGA12V108W0WW.png
Zasilacz Zebra

(synt12108w – PWR-BGA12V108W0WW)

Zasilacz, 12 VDC, 9 A, złącze: 8-pinowe, zamów osobno: kabel DC, kabel zasilający (C13)

€126.13

€126.13

W magazynie 1146
12 months warranty
Main image file
PWR-WUA5V12W0EU.jpg
Zasilacz Zebra, UE

(sytc51ps – PWR-WUA5V12W0EU)

Zasilacz, 5 VDC, 2.5 A, w zestawie: wtyczka (EU), zamów osobno: kabel połączeniowy (USB-A)

€32.58

€32.58

W magazynie 2509
12 months warranty
Main image file
PWR-WUA5V12W0GB.jpg
Zebra power supply, UK

(sytc51ps-uk – PWR-WUA5V12W0GB)

Power supply, 5 VDC, 2.5 A, incl.: plug (UK), order separately: connection cable (USB-A), fits for: MC22, MC27

€32.58

€32.58

W magazynie 213
No warranty
Zebra power supply, USB

(sypsaw – PWR-WUA5V6W0WW)

Power supply, USB A, Input: 100-240 V, 0.2 A, Output: 5.2 V, 1.2 A, incl.: Adapter clips (EU, UK, US, AU), order separately: connection cable (USB)

€20.44

€20.44

W magazynie 18
1 month warranty
Main image file
Art_25284.jpg
RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (8")

(ramholder74 – RAM-HOL-ZE10CLU)

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with rugged boot.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10CLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10CLU holder is supplied.

€160.46

€160.46

W magazynie 0
36 months warranty
Main image file
Art_25285.jpg
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (8")

(ramholder76 – RAM-HOL-ZE10KLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10KLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with keys
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10KLU holder is supplied.

€190.71

€190.71

W magazynie 0
36 months warranty
Main image file
Art_25286.jpg
RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (8")

(ramholder53 – RAM-HOL-ZE10PCLU)

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PCLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Input Connector: 5.5 mm DC
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PCLU holder is supplied.

€232.73

€232.73

W magazynie 0
36 months warranty
Main image file
RAM-HOL-ZE10PD2CLU
RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (8")

(ramholder22 – RAM-HOL-ZE10PD2CLU)

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PD2CLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PD2CLU holder is supplied.

€287.35

€287.35

W magazynie 2
36 months warranty
Main image file
Art_25288.jpg
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (8")

(ramholder102 – RAM-HOL-ZE10PD2KLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PD2KLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with key
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PD2KLU holder is supplied.

€308.36

€308.36

W magazynie 0
36 months warranty
Main image file
RAM-HOL-ZE10PD2U
RAM Mounts Form-Fit Holder for Zebra ET51/56 (8")

(ramholder23 – RAM-HOL-ZE10PD2U)

This RAM Mounts holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PD2U:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PD2U holder is supplied.

€247.86

€247.86

W magazynie 0
36 months warranty
Main image file
Art_25290.jpg
RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (8")

(ramholder85 – RAM-HOL-ZE10PDCLU)

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PDCLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Input Connector: 5.5 mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PDCLU holder is supplied.

€266.34

€266.34

W magazynie 0
36 months warranty
Main image file
Art_25291.jpg
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (8")

(ramholder77 – RAM-HOL-ZE10PDKLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PDKLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with key
Input Connector: 5.5 mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PDKLU holder is supplied.

€283.99

€283.99

W magazynie 0
36 months warranty
Main image file
Art_25292.jpg
RAM Mounts Form-Fit Holder (Latch) for Zebra ET51/56 (8")

(ramholder62 – RAM-HOL-ZE10PDU)

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with rugged case.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PDU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
With Latch
Prepared for mounting additional devices such as handhelds
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PDU holder is supplied.

€231.89

€231.89

W magazynie 0
36 months warranty
Main image file
Art_25293.jpg
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (8")

(ramholder58 – RAM-HOL-ZE10PKLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PKLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with key
Input Connector: 5.5mm DC
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PKLU holder is supplied.

€253.74

€253.74

W magazynie 0
36 months warranty
Main image file
RAM-HOL-ZE10PU
RAM Mounts Form-Fit Holder (Latch) for Zebra ET51/56 (8")

(ramholder4 – RAM-HOL-ZE10PU)

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Case.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
With Latch
Prepared for mounting additional devices such as handhelds
Input Connector: 5.5mm DC
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PU holder is supplied.

€196.60

€196.60

W magazynie 1
36 months warranty
Main image file
Art_25295.jpg
RAM Mounts Form-Fit Holder (Latch) for Zebra ET51/56 (8")

(ramholder109 – RAM-HOL-ZE10U)

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with rugged boot.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10U:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
With Latch
Additional mounting plate for attaching additional devices or accessories
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10U holder is supplied.

€125.17

€125.17

W magazynie 0
36 months warranty
Main image file
Art_25296.jpg
RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (10")

(ramholder86 – RAM-HOL-ZE11CLU)

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 10.1“ Series with rugged boot.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11CLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11CLU holder is supplied.

€162.98

€162.98

W magazynie 0
36 months warranty
Main image file
Art_25297.jpg
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (10")

(ramholder78 – RAM-HOL-ZE11KLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 10.1“ Series with rugged boot.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11KLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with keys
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11KLU holder is supplied.

€197.44

€197.44

W magazynie 0
36 months warranty
Main image file
Art_25298.jpg
RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (10")

(ramholder34 – RAM-HOL-ZE11PCLU)

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PCLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Input Connector: 5.5mm DC
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PCLU holder is supplied.

€253.74

€253.74

W magazynie 0
36 months warranty
Main image file
RAM-HOL-ZE11PD2CLU
RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (10")

(ramholder24 – RAM-HOL-ZE11PD2CLU)

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PD2CLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PD2CLU holder is supplied.

€305.00

€305.00

W magazynie 0
36 months warranty
Main image file
RAM-HOL-ZE11PD2KLU
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (10")

(ramholder6 – RAM-HOL-ZE11PD2KLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PD2KLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with key
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PD2KLU holder is supplied.

€326.01

€326.01

W magazynie 0
36 months warranty
Main image file
RAM-HOL-ZE11PD2U
RAM Mounts Form-Fit Holder for Zebra ET51/56 (10")

(ramholder5 – RAM-HOL-ZE11PD2U)

This RAM Mounts holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PD2U:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PD2U holder is supplied.

€266.34

€266.34

W magazynie 0
36 months warranty
Main image file
Art_25302.jpg
RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (10")

(ramholder35 – RAM-HOL-ZE11PDCLU)

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PDCLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PDCLU holder is supplied.

€280.63

€280.63

W magazynie 0
36 months warranty
Main image file
RAM-HOL-ZE11PDKLU
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (10")

(ramholder3 – RAM-HOL-ZE11PDKLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PDKLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with key
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PDKLU holder is supplied.

€305.84

€305.84

W magazynie 0
36 months warranty
Main image file
Art_25191.jpg
RAM Mounts Form-Fit Holder for Zebra ET51/56 (10")

(ramholder112 – RAM-HOL-ZE11PDU)

This RAM Mounts holder is suitable for Zebra ET5x 10.1“ Series with rugged boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PDU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Input Connector: 5.5mm DC-Connector
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PDU holder is supplied.

€248.70

€248.70

W magazynie 0
36 months warranty
Main image file
Art_25304.jpg
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (10")

(ramholder49 – RAM-HOL-ZE11PKLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PKLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with key
Input Connector: 5.5mm DC
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PKLU holder is supplied.

€268.03

€268.03

W magazynie 0
36 months warranty
Main image file
RAM-HOL-ZE11PU
RAM Mounts Form-Fit Holder (Latch) for Zebra ET51/56 (10")

(ramholder25 – RAM-HOL-ZE11PU)

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET5x 10.1“ with rugged boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
With Latch
Prepared for mounting additional devices such as handhelds
Input Connector: 5.5mm DC-Connector
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PU holder is supplied.

€208.36

€208.36

W magazynie 0
36 months warranty
Main image file
RAM-HOL-ZE11U
RAM Mounts Form-Fit Holder (Latch) for Zebra ET51/56 (10")

(ramholze11 – RAM-HOL-ZE11U)

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET5x 10.1“.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11U:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
With Latch
Prepared for mounting additional devices such as handhelds
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11U holder is supplied.

€141.13

€141.13

W magazynie 0
36 months warranty
Main image file
RAM-HOL-ZE21PD2U
RAM Mounts EZ-Roll'r Holder for Zebra ET40/45 (10")

(ramet4t-2 – RAM-HOL-ZE21PD2U)

This RAM Mounts EZ-Roll‘r holder is suitable for Zebra ET40 & ET45 10“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE21PD2U:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional informations:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE21U.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCK-ZE21PD2U.

Devices shown are not included in the delivery.
Only the RAM-HOL-ZE21PD2U holder is supplied.

€248.70

€248.70

W magazynie 0
36 months warranty
Zebra PowerPack battery charging station, 4 slots

(syet5chg4 – SAC-ET5X-4PPK1-01)

PowerPack battery charging station, 4 slots, order separately: power supply, DC cable, power cord, fits for: ET5X, ET4X & ET8X PowerPack

€162.17

€162.17

W magazynie 4
1 month warranty
Zebra ET5x Rugged Frame

(syet5xframio – SG-ET5X-10RCSE4-01)

ET5x Rugged Frame with I/O connector, for 10'' tablets, compatible with extended batteries and Handle/Shoulder Straps

€223.33

€223.33

W magazynie 0
No warranty
Zebra rugged frame, 8''

(syet5xhols – SG-ET5X-8RCSE2-02)

Rugged Frame, incl.: rugged I/O connector, fits for: ET5X (8'')

€216.24

€216.24

W magazynie 25
36 months warranty
Zebra handle strap

(syet50strap – SG-ET5X-HNDSTP-01)

Handle strap, order separately: rugged frame, D-Clips, fits for: ET5X

€24.02

€24.02

W magazynie 449
3 months warranty
Zebra shoulder strap

(syet5xsstrap – SG-ET5X-SHDRSTP-01)

Zebra shoulder strap, fits for: ET5X

€54.05

€54.05

W magazynie 257
3 months warranty
Zebra rysik, opakowanie 3 szt.

(sytc70stylus – SG-TC7X-STYLUS-03)

Rysik, w zestawie: sprężynowy smycz, opakowanie 3 szt., pasuje do: TC51, TC56, TC7X, TC8000, MC3300, ET51/56 (Android), ET50/55 (Android), MC9300.

€54.05

€54.05

W magazynie 239
12 months warranty
Zebra Service, ET5x

(syaeet5xxx-3c – Z1AE-ET5XXX-3C00)

3 Year Zebra OneCare Essential. Includes Comprehensive Coverage.

€524.25

€524.25

Dostępne
No warranty
Zebra Service, OneCare Essential, 5 Years

(syaeet5xxx-5c – Z1AE-ET5XXX-5C00)

Zebra OneCare Essential, with Comprehensive Coverage, 5 Years, fits for: ET5X

€825.51

€825.51

Dostępne
No warranty
Main image file
Z1B5-EMH250-5000.jpg
Serwis Zebra TSS, wsparcie oprogramowania, 5 lat

(syb5emh250-50 – Z1B5-EMH250-5000)

Wsparcie techniczne i oprogramowania Zebra OneCare (TSS), okres: 5 lat, zawiera: wsparcie telefoniczne, konserwację oprogramowania, cena za urządzenie

€160.91

€160.91

Dostępne
No warranty
Zebra service

(ettocereet5-2c – Z1RE-ET5XXX-2C00)

OneCare Essential, 2 Jahre, renewal, ET5XXX

€351.07

€351.07

Dostępne
No warranty
Zebra expansion module, 2D, Android, 10''

(syet5x10scn7-02 – ZBK-ET5X-10SCN7-02)

Expansion module, SE4770 barcode scanner (1D, 2D), range: 1.6 inch to 36.3 inch, rotating hand strap, fits for: ET51/ET56 (Android, 10'')

€860.32

This article will be removed from range! Secure the last remainders of stock now!

€860.32

W magazynie 15
3 months warranty

Data sheet & more

Offers and indicated delivery times are not binding and only valid for resellers. Prices are in EUR, exclusive of VAT and subject to change. Errors excepted.

* The discount refers to the original sales price.

CEO ONLINE – Ask me anything!

Open the chat dialogue, start a new conversation and select CEO under Department.