Salta al contenuto principale
Zebra ET80/ET85
Tablet 2-in-1 per il settore pubblico
  • Tablet robusto 2-in-1 con tastiera rimovibile
  • Display touch QHD da 12" con 800 nit e Corning Gorilla Glass
  • Processori Intel Core i5/i7 di 11a generazione, batteria ai polimeri di litio da 5.180 mAh
  • Certificato IP65 ed e-Mark, resistente agli urti da 1,5 m (con cover protettiva)
  • USB-C, Wi-Fi 6, Bluetooth 5.2, NFC ed Ethernet opzionale; ET85: 5G e GPS
1399

Description

I tablet 2-in-1 Zebra ET80/ET85 sono progettati specificamente per il settore pubblico e vengono utilizzati principalmente nell'industria manifatturiera, nei governi statali e locali o nelle utility. Le loro tastiere staccabili e il display QHD da 12" con 800 nit, touch a 10 punti e vetro antigraffio Corning Gorilla Glass li rendono facili (e veloci) da usare, anche alla luce del sole, e impressionano con prestazioni di prima classe in ogni situazione e ambiente.
Entrambi i tablet sono molto più flessibili di un laptop: sono più sottili del 35% e più leggeri del 20% rispetto ai principali concorrenti 2-in-1 con la stessa dimensione dello schermo. I tablet ET80/ET85 si trasformano in un laptop o in una postazione di lavoro fissa o mobile completa in pochi secondi semplicemente collegando e scollegando la robusta tastiera. Soddisfano i requisiti e-Mark e sono quindi adatti all'uso nei veicoli.

Ulteriori dotazioni degli ET80/ET85 includono potenti processori Intel Core i5 o i7 di undicesima generazione, nonché 8 o 16 GB di memoria RAM e 128, 256 o 512 GB di SSD. La batteria sostituibile agli ioni di litio da 5.180 mAh con tecnologia PowerPrecision+ garantisce lunghi tempi di attività. Opzionalmente è disponibile una batteria hot-swap da 3.400 mAh con un'autonomia fino a 11 ore. Inoltre, i tablet offrono una fotocamera frontale Windows Hello da 5 megapixel e una fotocamera posteriore a colori da 13 megapixel con autofocus e flash LED controllato dall'utente. A seconda delle esigenze, sono disponibili anche uno scanner 2D integrato con motore di scansione SE4107 e un lettore di impronte digitali Windows Hello. Lo scanner, che legge anche codici a barre stampati male, danneggiati e graffiati, si trova nell'angolo in basso a destra dei tablet ET80/ET85. Per il personale del settore pubblico, ciò offre il vantaggio di poter scansionare i documenti più facilmente, anche quando il tablet è collegato al veicolo.

L'ampia selezione di interfacce garantisce un trasferimento dati fluido e un'elevata connettività. Questa è composta da USB-A 3.2, USB-C, Wi-Fi 6, Bluetooth 5.2, NFC e Ethernet opzionale. L'ET85 offre inoltre 5G e GPS, nonché una nano e una eSIM. I tablet sono dotati di due altoparlanti e quattro microfoni con cancellazione del rumore. Che si tratti di una chiamata push-to-talk o video, della dettatura di appunti o dell'uso del comando vocale, ogni parola viene compresa. Durante la progettazione dei tablet 2-in-1 ET80/ET85, Zebra si è concentrata su un design senza ventola con elevata durabilità. Sono completamente protetti da polvere e getti d'acqua secondo gli standard IP65 e sono resistenti agli urti secondo MIL-STD-810H e MIL-STD 461G da fino a 1,2 m o 1,5 m con la cover protettiva opzionale. Grazie alla certificazione Class 1 Division 2, i tablet ET80 e ET85 possono essere utilizzati anche in sicurezza in prossimità di materiali pericolosi infiammabili.

Per prestazioni ancora maggiori ed efficienza potenziata, i tablet ET80/ET85 accedono agli strumenti Zebra Mobility DNA e Scanning DataCapture DNA. Questi includono Workforce Connect con varie funzionalità push-to-talk e di messaggistica di testo, e 123Scan per il riconoscimento automatico e la configurazione semplificata dello scanner integrato.

Accessori

Accessory Category
Brodit Lock Module

(brd216229 – 216229)

Lock Module, incl. 2 keys, fits for: ET8x Mounts with Rugged Snapback Boot

€67.22

Articolo speciale: nessun annullamento o reso possibile!

€67.22

Disponibile 0
Garanzia di 12 mesi
Brodit Holder, Key-Lock

(brd217039 – 217039)

Holder, Key-Lock, USB-C 3.1, AMPS, VESA 75, order separately: Power Supply, fits for: ET80, ET85

€168.06

Articolo speciale: nessun annullamento o reso possibile!

€168.06

Disponibile 0
Garanzia di 12 mesi
Brodit Holder, Spring-Lock

(brd217040 – 217040)

Holder, Spring-Lock, USB-C 3.1, AMPS, VESA 75, order separately: Power Supply, fits for: ET80, ET85

€151.25

Articolo speciale: nessun annullamento o reso possibile!

€151.25

Disponibile 1
Garanzia di 12 mesi
Adattatore Zebra

(zcabadap – 450143)

Adattatore per accendisigari, per docking station veicolari, ingresso 12-14V, connettore 5,5 x 2,5mm, lunghezza: 180cm, adatto per: L10/ET8X (docking station veicolari)

€26.72

€26.72

Disponibile 0
Garanzia di 3 mesi
Brodit Passive Mount

(brd710296 – 710296)

Passive Mount, compatible with expansion module, handstrap and rugged boot, AMPS, VESA 75, fits for: ET80, ET85

€159.66

Articolo speciale: nessun annullamento o reso possibile!

€159.66

Disponibile 0
Garanzia di 12 mesi
Brodit Passive Mount

(brd710297 – 710297)

Passive Mount, for device with or without expansion back module / handstrap, VESA 75, fits for: ET8X

€142.85

Articolo speciale: nessun annullamento o reso possibile!

€142.85

Disponibile 0
Garanzia di 12 mesi
Brodit Passive Mount

(brd710301 – 710301)

Passive Mount, only compatible with rugged boot, AMPS, VESA 75, fits for: ET80, ET85

€134.45

Articolo speciale: nessun annullamento o reso possibile!

€134.45

Disponibile 0
Garanzia di 12 mesi
Brodit Passive Mount

(brd710302 – 710302)

For devices without rugged frame, with AMPS, VESA 75, fits for: ET8X

€117.64

Articolo speciale: nessun annullamento o reso possibile!

€117.64

Disponibile 0
Garanzia di 12 mesi
Brodit Passive Mount

(brd739296 – 739296)

Passive Mount, with key-lock, incl. 2 keys, compatible with expansion back, handstrap and rugged boot, AMPS, VESA 75, fits for: ET80, ET85

€218.48

Articolo speciale: nessun annullamento o reso possibile!

€218.48

Disponibile 0
Garanzia di 12 mesi
Brodit Passive Mount

(brd739297 – 739297)

Passive Mount, lockable, includes 2 keys, for device with or without expansion back module / handstrap, VESA 75, fits for: ET8X

€201.67

Articolo speciale: nessun annullamento o reso possibile!

€201.67

Disponibile 0
Garanzia di 12 mesi
Brodit Passive Mount

(brd739301 – 739301)

Passive Mount, with key-lock, incl. 2 keys, only compatible with rugged boot, AMPS, VESA 75, fits for: ET80, ET85

€184.87

Articolo speciale: nessun annullamento o reso possibile!

€184.87

Disponibile 0
Garanzia di 12 mesi
Brodit Passive Mount

(brd739302 – 739302)

For devices without rugged frame, lockable, incl. 2 Keys, with AMPS, VESA 75, fits for: ET8X

€176.46

Articolo speciale: nessun annullamento o reso possibile!

€176.46

Disponibile 0
Garanzia di 12 mesi
Brodit Passive Mount

(brd741296 – 741296)

Passive Mount, with pring stud locking, compatible with expansion back, handstrap and rugged boot, AMPS, VESA 75, fits for: ET80, ET85

€201.67

Articolo speciale: nessun annullamento o reso possibile!

€201.67

Disponibile 31
Garanzia di 12 mesi
Brodit Passive Mount

(brd741297 – 741297)

Passive Mount, spring stud locking, for device with or without expansion back module / handstrap, VESA 75, fits for: ET8X

€184.87

Articolo speciale: nessun annullamento o reso possibile!

€184.87

Disponibile 0
Garanzia di 12 mesi
Brodit Passive Mount

(brd741301 – 741301)

Passive Mount, with pring stud locking, only compatible with rugged boot, AMPS, VESA 75, fits for: ET80, ET85

€176.46

Articolo speciale: nessun annullamento o reso possibile!

€176.46

Disponibile 0
Garanzia di 12 mesi
Brodit Passive Mount

(brd741302 – 741302)

For devices without rugged frame, with spring stud locking, with AMPS, VESA 75, fits for: ET8X

€159.66

Articolo speciale: nessun annullamento o reso possibile!

€159.66

Disponibile 0
Garanzia di 12 mesi
Zebra spare battery

(zet80bat – BTRY-ET8X-12IN1-01)

Spare battery, 5180 mAh, Li-Polymer, fits for: ET8X

€166.34

€166.34

Disponibile 17
Garanzia di 12 mesi
Zebra Powerpack battery

(zet80bat2 – BTRY-ET8X-PRPK1-01)

Powerpack battery, fits for: ET8X expansion back

€256.07

€256.07

Disponibile 13
Garanzia di 12 mesi
Zebra connection cable, Ethernet

(zet80rj45cab – CBL-ET8X-E1-01)

Connection cable, Ethernet, fits for: ET8X

€47.51

€47.51

Disponibile 0
Garanzia di 3 mesi
Zebra ET8X Port Expander with Video

(zet80dock9 – CRD-ET8X-M-9PEM1-01)

ET8X Port Expander with Video - Field installable 9 port expander with 4x USB (2x 3.0), 3x Ethernet RJ45, 2x HDMI. Add to Zebra Power Dock for vehicle docking solution with HDMI video

€594.00

€594.00

Disponibile 4
Garanzia di 12 mesi
Zebra ET8X Dock Fan Module

(zet80dockfan – CRD-ET8X-M-FAN1-01)

ET8X Dock Fan Module - Attaches to dock and provides ventilation for extreme climates. Only recommended for elevated temperatures with excessive solar loading or non-air-conditioned vehicles.

€237.62

€237.62

Disponibile 0
Garanzia di 3 mesi
Zebra Keyboard Bracket

(zet80dockbra – CRD-ET8X-M-KBBK1-01)

Keyboard Bracket (without screws), fits for: ET8X

€225.72

€225.72

Disponibile 0
Garanzia di 3 mesi
Zebra Port Expander Cover

(zet80dockcov – CRD-ET8X-M-PEMCV1-01)

Optional field installable cover with thumbscrew convenience for Zebra docking solutions with port expansion, such as the vehicle dock or office dock

€95.05

€95.05

Disponibile 0
Garanzia di 3 mesi
Zebra Antenna Module, Pass-Through

(zet80dockant – CRD-ET8X-M-PTA1-01)

Module, Pass-Through, fits for: ET8X (PTA)

€380.17

€380.17

Disponibile 0
Garanzia di 3 mesi
Zebra docking station, with lock

(zet80offdock – CRD-ET8X-OFFDK1-01)

Docking station, 2x USB 2.0, 2x USB 3.0, 3x Ethernet, 2x HDMI, IP65, with lock, order separately: power supply, power cord, fits for: ET8X

€950.39

€950.39

Disponibile 2
Garanzia di 12 mesi
Zebra vehicle charging station

(zet80pdock – CRD-ET8X-PWRDK1-01)

vehicle charging station, drilling: VESA 100x100, VESA 75x75, IP65, order separately: vehicle mount, vehicle adapter, fits for: ET8X

€475.20

€475.20

Disponibile 15
Garanzia di 12 mesi
Zebra vehicle charging-/communication station, with lock

(zet80vdock – CRD-ET8X-VEHDK1-01)

Vehicle charging-/communication station, 2x USB 2.0, 2x USB 3.0, 3x Ethernet, drilling: VESA 100x100, VESA 75x75, IP65, with lock, order separately: vehicle mount, vehicle adapter, fits for: ET8X

€772.20

€772.20

Disponibile 68
Garanzia di 12 mesi
Zebra keyboard, GER

(zet80keybde – KYB-ET8X-2IN1-DE1-01)

Keyboard, 2-in-1, layout: GER, 82 keys, multi-color backlight, 6 additional programable keys, fits for: ET8X

€534.61

€534.61

Disponibile 0
Garanzia di 3 mesi
Zebra keyboard, ES

(zet80keybes – KYB-ET8X-2IN1-ES1-01)

Keyboard, 2-in-1, layout: ES, 82 keys, multi-color backlight, 6 additional programable keys, fits for: ET8X

€534.61

€534.61

Disponibile 9
Garanzia di 36 mesi
Zebra keyboard, FR

(zet80keybfr – KYB-ET8X-2IN1-FR1-01)

Keyboard, 2-in-1, layout: FR, 82 keys, multi-color backlight, 6 additional programable keys, fits for: ET8X

€534.61

€534.61

Disponibile 0
Garanzia di 36 mesi
Zebra Keyboard, Nordic

(zet80keybnor – KYB-ET8X-2IN1-NO1-01)

Keyboard, 2-in-1, layout: Nordic, 82 keys, multi-color backlight, 6 additional programable keys, fits for: ET8X

€474.89

€474.89

Disponibile 0
Garanzia di 36 mesi
Zebra keyboard, UK

(zet80keybuk – KYB-ET8X-2IN1-UK1-01)

Keyboard, 2-in-1, layout: UK, 82 keys, multi-color backlight, 6 additional programable keys, fits for: ET8X

€534.61

€534.61

Disponibile 0
Garanzia di 36 mesi
Zebra Keyboard

(zet80keybus – KYB-ET8X-2IN1-US1-01)

Rugged 82 Key Keyboard, US-Layout QWERTY, for: ET8X

€534.61

€534.61

Disponibile 67
Garanzia di 36 mesi
Zebra battery door

(zet80batdoor – MISC-ET8X-BTDR1-01)

Battery door, fits for: ET8X

€47.51

€47.51

Disponibile 0
Garanzia di 3 mesi
Zebra Power Supply

(zet80ps-2 – PWR-BGA15V45W-UC2-WW)

Zebra Power Supply, USB-C, 15V, 3A, 45W, order separately: Power Cord (C5), fits for: ET60, ET65, ET80, ET85

€51.72

€51.72

Disponibile 691
Garanzia di 36 mesi
Main image file
Art_25729.jpg
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET80/85

(ramholder63 – RAM-HOL-ZE22LU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET80 & ET85 2-in-1 Tablet with or without Rugged Boot and Keyboard.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE22LU:
Compatible with accessories
Easy insertion and removal
Lockable with key
Additional mounting plate for attaching additional devices or accessories
Usable with RAM Vent-Temp, Temp Right or NFC-Repeater
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE22LU holder is supplied.

€276.43

€276.43

Disponibile 0
Garanzia di 36 mesi
Main image file
RAM-HOL-ZE22PD2LU
RAM Mounts Form-Fit Holder (key-locking) for Zebra ET80/85

(ramholze22pd2lu – RAM-HOL-ZE22PD2LU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET8x 2-in-1 Tablet with or without Rugged Boot and Keyboard.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in Dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE22PD2LU:
Compatible with accessories
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Usable with RAM Vent-Temp, Temp-Right or NFC-Repeater
Lockable with key
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE22PD2LU holder is supplied.

€456.26

€456.26

Disponibile 1
Garanzia di 36 mesi
Main image file
Art_25724.jpg
RAM Mounts Form-Fit Holder (Latch) for Zebra ET80/85

(ramholder51 – RAM-HOL-ZE22PD2U)

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET8x 2-in-1 Tablet with or without Rugged Boot and Keyboard.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE22PD2U:
Compatible with accessories
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Usable with RAM Vent-Temp, Temp- Right or NFC-Repeater
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE22PD2U holder is supplied.

€406.68

€406.68

Disponibile 0
Garanzia di 36 mesi
Main image file
RAM-HOL-ZE22PDLU.jpg
RAM Mounts Form-Fit Holder (key-locking) for Zebra ET80/85

(ramholder57 – RAM-HOL-ZE22PDLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET8x 2-in-1 Tablet with or without Rugged Boot and Keyboard.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE22PDLU:
Compatible with accessories
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Usable with RAM Vent-Temp, Temp-Right or NFC-Repeater
Lockable with key
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE22PDLU holder is supplied.

€414.24

€414.24

Disponibile 0
Garanzia di 36 mesi
Main image file
RAM-HOL-ZE22PDU
RAM Mounts Form-Fit Holder (Latch) for Zebra ET80/85

(ramholze22pdu – RAM-HOL-ZE22PDU)

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET8x 2-in-1 Tablet with or without Rugged Boot and Keyboard.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE22PDU:
Compatible with accessories
Easy insertion and removal
With Latch
Additional mounting plate for attaching additional devices or accessories
Usable with RAM Vent-Temp, Temp- Right or NFC-Repeater
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE22PDU holder is supplied.

€368.03

€368.03

Disponibile 0
Garanzia di 36 mesi
Main image file
Art_25727.jpg
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET80/85

(ramholder103 – RAM-HOL-ZE22PLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET80 & ET85 2-in-1 Tablet with or without Rugged Boot and Keyboard.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE22PLU:
Compatible with accessories
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Usable with RAM Vent-Temp, Temp Right or NFC-Repeater
Lockable with key
Input Connector: 5.5mm DC
Input Cable Length: ca. 100 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE22PLU holder is supplied.

€348.70

€348.70

Disponibile 0
Garanzia di 36 mesi
Main image file
RAM-HOL-ZE22PU
RAM Mounts Form-Fit Holder (Latch) for Zebra ET80/85

(ramet8dock – RAM-HOL-ZE22PU)

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET80 & ET85 2-in-1 Tablet with or without Rugged Boot and Keyboard.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE22PU:
Compatible with accessories
Easy insertion and removal
With Latch
Additional mounting plate for attaching additional devices or accessories
Usable with RAM Vent-Temp, Temp Right or NFC-Repeater
Input Connector: 5.5mm DC
Input Cable Length: ca. 100 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE22PU holder is supplied.

€299.96

€299.96

Disponibile 0
Garanzia di 36 mesi
Main image file
Art_25730.jpg
RAM Mounts Form-Fit Holder (Latch) for Zebra ET80/85

(ramet8tab – RAM-HOL-ZE22U)

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET80 & ET85 2-in-1 Tablet with or without Rugged Frame and Keyboard.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE22U:
Compatible with accessories
Easy insertion and removal
With Latch
Additional mounting plate for attaching additional devices or accessories
Usable with RAM Vent-Temp, Temp Right or NFC-Repeater
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE22U holder is supplied.

€231.05

€231.05

Disponibile 0
Garanzia di 36 mesi
Zebra PowerPack battery charging station, 4 slots

(syet5chg4 – SAC-ET5X-4PPK1-01)

PowerPack battery charging station, 4 slots, order separately: power supply, DC cable, power cord, fits for: ET5X, ET4X & ET8X PowerPack

€162.17

€162.17

Disponibile 0
Garanzia di 1 mese
zebra rugged boot

(zet80boot – SG-ET8X-BOOT1-01)

Rugged snapback boot, fits for: ET8X

€237.62

€237.62

Disponibile 78
Garanzia di 36 mesi
Zebra carry handle

(zet80handle – SG-ET8X-HANDLE1-01)

Carry handle, order separately: rugged snapback frame

€62.96

€62.96

Disponibile 87
Garanzia di 3 mesi
Zebra Stylus Holder

(zet80sph – SG-ET8X-PENLOOP1-01)

Stylus Holder Loop, compatible with Rugged Boot and Cradles, fits for: ET8X

€20.38

€20.38

Disponibile 33
Garanzia di 3 mesi
Zebra shoulder strap

(zet80sstrap – SG-ET8X-SHLDR1-01)

Shoulder strap, order separately: rugged snapback frame, fits for: ET8X

€47.51

€47.51

Disponibile 9
Garanzia di 3 mesi
Zebra Stylus

(zet80stlyus – SG-ET8X-STYLUS1-01)

Stylus, long, order separately: tether, fits for: L10ax

€118.79

€118.79

Disponibile 54
Garanzia di 3 mesi
Jarltech StageIT SP L

(stageit-l – Stageit-l)

Contact us and book our Staging Premium Service

€60.00

€60.00

Disponibile 99784
Nessuna garanzia
Jarltech StageIT SP M

(stageit-m – Stageit-m)

Contact us and book our Staging Premium Service

€30.00

€30.00

Disponibile 99364
Nessuna garanzia
Jarltech StageIT SP S

(stageit-s – Stageit-s)

Contact us and book our Staging Premium Service

€10.00

€10.00

Disponibile 99846
Nessuna garanzia
Jarltech StageIT SP XL

(stageit-xl – Stageit-xl)

Contact us and book our Staging Premium Service

€240.00

€240.00

Disponibile 99977
Nessuna garanzia
Zebra Service, 3 years

(syaeet8x-3c – Z1AE-ET8XXX-3C00)

Zebra OneCare Essential, 3 years, 3 days TAT, purchased within 30 days, with comprehensive coverage, fits for: ET8X

€238.88

€238.88

Disponibile
Nessuna garanzia
Zebra Kickstand

(zet80kstand – ZBK-ET8X-KICKSTAND-01)

Kickstand(foldable), adjustable viewing angle, order separately: Expansion Back, fits for: ET8X

€154.44

€154.44

Disponibile 0
Garanzia di 3 mesi
Zebra expansion back

(zet80card – ZBK-ET8X-SMARTCARD-01)

Expansion back, incl.: smart card CAC reader, order separately: battery, fits for: ET8X

€415.79

€415.79

Disponibile 0
Garanzia di 3 mesi

Scheda dati e altro

Le offerte e i tempi di consegna indicati non sono vincolanti e sono validi solo per i rivenditori. I prezzi sono in EUR, IVA esclusa e soggetti a modifiche. Salvo errori.

* The discount refers to the original sales price.

CEO ONLINE – Chiedimi qualsiasi cosa!

Apri la finestra della chat, avvia una nuova conversazione e seleziona CEO in Reparto.