Salta al contenuto principale
Zebra ET51/ET56

Reliable, long-lasting tablets for every work environment

da

€1,227.90

(prezzo al dettaglio consigliato)
  • Robust enterprise tablets for office and field staff
  • Available with a 8.4'' or 10.1'' multi-touch display with Gorilla Glass
  • Intel quad-core processor and 4 GB RAM
  • Reliable connectivity: WLAN, GPS, Bluetooth, LTE (ET56)
  • Operating system: Android
1397

Description

The Zebra ET51/ET56 tablets combine the chic appearance of a consumer device with the necessary reliability of an enterprise tablet, and bridge the gap between the short-lived end consumer segment and the highly durable tablet area in the high price segment. With numerous expansion options, the elegant enterprise tablets cover a large working environment – perfect for use in the fields of transportation and logistics, field service not to mention in retail stores.

Both the compact 8.4'' and the 10.1'' display are readable in nearly any lighting conditions and also seamlessly react when wet or when the user is wearing gloves. The impact-resistant, scratch-proof Corning Gorilla Glass protects the tablets’ most sensitive components. The ET51/ET56 is IP65-certified against dust and jet water. Plus, it withstands impacts and shocks, making it practical for usage in a vehicle (from a forklift in the warehouse up to delivery trucks on the road).

For good native wireless communication the tablets convince with reliable wireless support (802.11ac/r/k/v), GPS and Bluetooth 4.2. For use in the field the ET56 offers full WWAN connectivity with a high data rate in the LTE standard. The rapid Apollo Lake quad-core processor with 1.6 GHz and 4 GB of DDR4 RAM thereby processes large amounts of data at a high speed. Another advantage: the processor minimises energy consumption and increases the life cycle of the battery.

On the rear of the tablets there is a practical 8 megapixel colour camera. Via the 2 megapixel front camera it is possible to video conference via WLAN or mobile networks. This way, users are ensured immediate help and support from external experts, colleagues or bosses. With the expansion module with a scan engine, they capture nearly every 1D or 2D barcode, no matter what condition it is in - damaged, dirty or poorly printed.

The tablets are also optionally available with Android. In these versions, they feature a higher resolution, a 13 megapixel colour camera on the back and a built-in 5 megapixel front camera. A Qualcomm Snapdragon 660 Octa-core processor with 2.2 GHz and 32 GB of flash memory process large amounts of data at high speed, while the powerful 6,440 mAh lithium polymer battery ensures long operating times. The interfaces include Bluetooth 5.0, WLAN (802.11 ac) and a USB-C interface. The 10.1" version also offers 2x2 MIMO, 4G LTE, as well as GPS, GLONASS, Galileo and Beidou support. The 8" version, on the other hand, is available with an integrated barcode scanner, as needed. Thanks to PRZM technology, it even captures damaged or dirty 1D/2D barcodes reliably and quickly.

As needed, the Android version is also available as an 8'' variant with an integrated barcode scanner. Thanks to PRZM technology, it even captures damaged or dirty 1D/2D barcodes reliably and quickly.

With the versatile accessories they expand not only the tablet itself, but also the application areas of the ET51/ET56. The Android versions are also supported by Zebra Mobility DNA.

Accessori

Accessory Category
Main image file
PWR-BGA12V50W0WW.png
Alimentatore Zebra

(synt1250w – PWR-BGA12V50W0WW)

Alimentatore, 12 VDC, 4,16 A, connettore: 4 pin, da ordinare separatamente: cavo DC, cavo di alimentazione (C13)

€58.85

€58.85

Disponibile 1426
Garanzia di 1 mese
Mobilis shoulder strap

(mobsstrap – 001027)

Safety carry shoulder strap

€17.49

€17.49

Disponibile 64
Garanzia di 24 mesi
Mobilis D-Rings

(mob001089 – 001089)

Universal Hypalon D-Rings, 4 peaces

€9.95

€9.95

Disponibile 45
Garanzia di 12 mesi
Mobilis screen protector, IK06, ET5X (10.1'')

(mob036174 – 036174)

Screen protector, Anti-Shock IK06, Hardness: 5H, Clear, Easy set up (bubble free), fits for: ET5X (10.1'')

€31.66

Articolo speciale: nessun annullamento o reso possibile!

Questo articolo sarà rimosso dall'assortimento! Blocca subito le ultime scorte rimaste!

€31.66

Disponibile 18
Garanzia di 24 mesi
Mobilis protective case

(mob067005 – 067005)

Protective case, incl.: kick stand, hand strap (rotating), fits for: ET51/56 (10.1'')

€51.66

€51.66

Disponibile 2
Garanzia di 24 mesi
Brodit Charging Module, USB

(brd216230 – 216230)

Charging Module with USB-A Host and DC connector 5,5x5,1-1,5mm for Module Upgrade holders, no cables included, fits for: ET50, ET51, ET55, ET56

€159.66

Articolo speciale: nessun annullamento o reso possibile!

€159.66

Disponibile 0
Garanzia di 12 mesi
Brodit voltage converter

(brd216240 – 216240)

Voltage converter, 48 VAC, 12 VDC, fits for: ET5X

€138.65

Articolo speciale: nessun annullamento o reso possibile!

€138.65

Disponibile 0
Garanzia di 12 mesi
Brodit extension plate

(brd216250 – 216250)

Extension plate, fit for: Zebra ET5X 8.4'' Module Upgrade

€16.80

Articolo speciale: nessun annullamento o reso possibile!

€16.80

Disponibile 0
Garanzia di 12 mesi
Brodit extension plate

(brd216251 – 216251)

Extension plate, fit for: Zebra ET5X 10.1'' Module Upgrade

€16.80

Articolo speciale: nessun annullamento o reso possibile!

€16.80

Disponibile 0
Garanzia di 12 mesi
Brodit USB-Hub for ET5x

(brd216258 – 216258)

USB-Hub for ET5x, 3x USB-A, 1x Ethernet, fits for: Module upgrade cradles

€84.03

Articolo speciale: nessun annullamento o reso possibile!

€84.03

Disponibile 0
Garanzia di 12 mesi
Main image file
25-124330-01R.jpg
Cavo Micro USB Zebra

(symc9500cabu – 25-124330-01R)

Cavo Micro USB, ActiveSync, lunghezza: 1,22 m, adatto per: basi di ricarica/trasmettitore Zebra

€12.02

€12.02

Disponibile 194
Garanzia di 3 mesi
Main image file
50-16000-671R.png
Cavo di alimentazione di Zebra, C13, IT

(syacabit – 50-16000-671R)

Power cord, C13, Italy, length: 1.8 m, colour: black

€18.03

€18.03

Disponibile 92
Garanzia di 1 mese
Brodit charging station (MOLEX), ET5X (10'') (protective case)

(brd510892 – 510892)

Charging station (MOLEX), fits for: ET5X (10'') (protective case)

€302.51

Articolo speciale: nessun annullamento o reso possibile!

€302.51

Disponibile 0
Garanzia di 12 mesi
Main image file
58-40000-007R.jpg
Tracolla Zebra

(systrap – 58-40000-007R)

Tracolla, adatta per: fondina

€17.14

€17.14

Disponibile 2600
Garanzia di 3 mesi
Zebra ET5x charging cradle

(brd736267 – 736267)

ET5x charging cradle, 2 keys, for robust frame, with/without Exp. Modules. USB-A Host+DC5,5x5,1-1,5mm (no cable included).

€327.72

Articolo speciale: nessun annullamento o reso possibile!

€327.72

Disponibile 2
Garanzia di 12 mesi
Zebra ET5x 10.1 Module Upgrade

(brd739266 – 739266)

Zebra ET5x Passiv Mount lockable, 10.1 Module Upgrade, 2 keys included, for robust frame, with/without expansion module/handstrap. AMPS+VESA 75 holes. Module Upgrade Cradle.

€176.46

Articolo speciale: nessun annullamento o reso possibile!

€176.46

Disponibile 0
Garanzia di 12 mesi
Zebra ET5x Passiv Mount

(brd739267 – 739267)

Zebra ET5x Passiv Mount, 8.4 Module Upgrade, 2 keys included, for robust frame, with/without expansion module/handstrap. AMPS+VESA 75 holes. Module Upgrade Cradle.

€176.46

Articolo speciale: nessun annullamento o reso possibile!

€176.46

Disponibile 8
Garanzia di 12 mesi
Brodit Holder for Zebra ET5X

(brd741266 – 741266)

Brodit bracket with lock, compatible with Rugged Frame and with/without Expansion Module/Handstrap, with MPS, VESA 75, for Zebra 10'' ET50, ET51, ET55, ET56

€168.06

Articolo speciale: nessun annullamento o reso possibile!

€168.06

Disponibile 0
Garanzia di 12 mesi
Brodit Active Mount

(brd747267 – 747267)

Active Mount, for devices with Rugged Frame, with or without expansion module / handstrap, order separately: power supply, USB-A Host, Upgrade Module, fits for: ET5x (8'')

€310.92

Articolo speciale: nessun annullamento o reso possibile!

€310.92

Disponibile 0
Garanzia di 12 mesi
Main image file
BRKT-SCRD-SMRK-01.png
Staffa di montaggio a parete Zebra

(sytc8000mount – BRKT-SCRD-SMRK-01)

Staffa da parete, adatta per: stazioni di ricarica, stazioni di ricarica/comunicazione a 5 slot

€185.36

€185.36

Disponibile 34
Garanzia di 1 mese
Zebra spare battery

(syet5xbat10-3 – BTRY-ET5X-10IN3-02)

Spare battery, 4950 mAh, internal battery, fits for: ET51/ET56 (10 inch, Windows)

€117.16

€117.16

Disponibile 32
Nessuna garanzia
Zebra spare battery

(syet51exbat – BTRY-ET5X-10IN5-01)

Spare battery, extended, 9660 mAh, fits for: ET51/ET56 (10'' Android)

€152.56

€152.56

Disponibile 90
Garanzia di 12 mesi
Zebra spare battery, 6440 mAh

(syet5xbatp8 – BTRY-ET5X-8IN5-01)

Spare battery, 6440 mAh, fits for: ET51/ET56 (8'', Android)

€134.54

€134.54

Disponibile 1
Nessuna garanzia
Zebra PowerPack

(syet50bat2 – BTRY-ET5X-PRPK2-01)

PowerPack battery, order separately: expansion module, fits for: ET5X, ET4X

€258.27

€258.27

Disponibile 333
Garanzia di 3 mesi
Zebra connection cable, RS-232

(sycabr71 – CBA-R71-C09ZAR)

Connection cable, RS-232, length: 2.7 m, coiled, power on PIN 9, TxD on PIN 2

€84.04

€84.04

Disponibile 96
Garanzia di 1 mese
Zebra connection cable, RS-232, freezer

(sycabrf2 – CBA-RF2-C09ZAR)

Connection cable, RS-232, freezer, length: 2.7 m, coiled, power on PIN 9, TxD on PIN 2

€64.66

€64.66

Disponibile 56
Garanzia di 1 mese
Zebra connection cable, USB

(sycabu09 – CBA-U09-C15ZAR)

Connection cable, USB, length: 4.5 m, coiled, cable code: U09

€96.98

€96.98

Disponibile 134
Garanzia di 1 mese
Zebra connection cable, USB

(sycabu12 – CBA-U12-C09ZAR)

Connection cable, USB, length: 2.7 m, coiled, cable code: U12

€34.47

€34.47

Disponibile 217
Garanzia di 1 mese
Zebra connection cable, USB, freezer

(sycabuf6 – CBA-UF6-C12ZAR)

Connection cable, USB, shielded, freezer, length: 3.65 m, coiled

€96.98

€96.98

Disponibile 99
Garanzia di 1 mese
Main image file
CBL-DC-381A1-01.png
Cavo CC Zebra

(sydc-8 – CBL-DC-381A1-01)

Cavo DC, connettore (alimentazione: 8 pin / stazione 4 pin), adatto per: stazione multi slot

€31.24

€31.24

Disponibile 1328
Garanzia di 1 mese
Cavo CC Zebra

(sydc-7 – CBL-DC-382A1-01)

Cavo DC, connettore (alimentatore: 8 pin / stazione 4 pin), fermo di sgancio esteso, adatto per: stazione multislot

€31.24

€31.24

Disponibile 299
Garanzia di 1 mese
Main image file
CBL-DC-388A1-01.jpg
Cavo DC Zebra

(synt1250cab – CBL-DC-388A1-01)

Cavo DC, connettore (alimentatore: 4 pin / stazione 1 pin), adatto per: stazione a 1 slot, stazione batteria a 4 slot

€10.80

€10.80

Disponibile 2414
Garanzia di 1 mese
Zebra adaptor plug, EU

(syadapt-eu – CN-000803-05)

Adaptor clip for power supply, EU

€10.46

€10.46

Disponibile 0
Nessuna garanzia
Zebra adapter, UK

(syadapt-uk – CN-000803-06)

Adapter clip for power supply, UK

€10.46

€10.46

Disponibile 0
Nessuna garanzia
Zebra charging station

(syet5xslot – CRD-ET5X-1SCG2)

Charging station, order separately: power supply, DC cable, power cord, fits for: ET5X

€243.26

€243.26

Disponibile 39
Garanzia di 12 mesi
Zebra charging station, 4 slots

(syet5xcha-2 – CRD-ET5X-SE4CO3-01)

Charging station, 4 slots, order separately: power supply, DC cable, power cord, fits for: ET5X

€801.58

€801.58

Disponibile 0
Garanzia di 12 mesi
Licenza di registrazione Android Zero Touch by Jarltech

(jtbindszt – jtbindszt)

Licenza di registrazione Android Zero Touch per un dispositivo

€9.42

€9.42

Disponibile
Nessuna garanzia
Alimentatore Zebra, kit

(synt1250wkit – KIT-PWR-12V50W)

Alimentatore (PWR-BGA12V50W0WW), 12 VDC, 4,16 A, connettore: 4 pin, incl.: cavo DC (CBL-DC-388A1-01) (alimentatore: 4 pin, stazione 1 pin), ordinare separatamente: cavo di alimentazione (C13)

€69.68

€69.68

Disponibile 1426
Garanzia di 12 mesi
Zebra connection cable, USB

(ettqln320ucab – P1031365-055)

Connection cable, USB (A/mini), strain relief, fits for: ZQ600, QLn220, QLn320, QLn420

€28.93

€28.93

Disponibile 38
Garanzia di 1 mese
Zebra power supply

(ettzq51dc – P1063406-030)

Power supply, DC-DC, open ended cable, 12-24V, fits for: vehicle dock, ZQ500, ZQ600, QLn220, QLn320, QLn420

€52.63

€52.63

Disponibile 70
Garanzia di 1 mese
Zebra power supply

(ettzq51dc2 – P1063406-031)

Power supply, DC-DC, with cigarette lighter adapter, 12-24V, fits for: ZQ500, ZQ600, QLn220, QLn320, QLn420, vehicle dock

€52.63

€52.63

Disponibile 0
Garanzia di 1 mese
Main image file
PWR-BGA12V108W0WW.png
Alimentatore Zebra

(synt12108w – PWR-BGA12V108W0WW)

Alimentatore, 12 VDC, 9 A, connettore: 8 pin, da ordinare separatamente: cavo DC, cavo di alimentazione (C13)

€126.13

€126.13

Disponibile 1211
Garanzia di 12 mesi
Main image file
PWR-WUA5V12W0EU.jpg
Alimentatore Zebra, UE

(sytc51ps – PWR-WUA5V12W0EU)

Alimentatore, 5 VDC, 2,5 A, incl.: spina (UE), ordinare separatamente: cavo di connessione (USB-A)

€32.58

€32.58

Disponibile 2403
Garanzia di 12 mesi
Main image file
PWR-WUA5V12W0GB.jpg
Unità di alimentazione di Zebra, UK

(sytc51ps-uk – PWR-WUA5V12W0GB)

Power supply, 5 VDC, 2.5 A, incl.: plug (UK), order separately: connection cable (USB-A)

€32.58

€32.58

Disponibile 213
Nessuna garanzia
Zebra power supply, USB

(sypsaw – PWR-WUA5V6W0WW)

Power supply, USB A, Input: 100-240 V, 0.2 A, Output: 5.2 V, 1.2 A, incl.: Adapter clips (EU, UK, US, AU), order separately: connection cable (USB)

€20.44

€20.44

Disponibile 25
Garanzia di 1 mese
Main image file
Art_25284.jpg
RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (8")

(ramholder74 – RAM-HOL-ZE10CLU)

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with rugged boot.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10CLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10CLU holder is supplied.

€160.46

€160.46

Disponibile 0
Garanzia di 36 mesi
Main image file
Art_25285.jpg
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (8")

(ramholder76 – RAM-HOL-ZE10KLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10KLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with keys
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10KLU holder is supplied.

€190.71

€190.71

Disponibile 0
Garanzia di 36 mesi
Main image file
Art_25286.jpg
RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (8")

(ramholder53 – RAM-HOL-ZE10PCLU)

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PCLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Input Connector: 5.5 mm DC
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PCLU holder is supplied.

€232.73

€232.73

Disponibile 0
Garanzia di 36 mesi
Main image file
RAM-HOL-ZE10PD2CLU
RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (8")

(ramholder22 – RAM-HOL-ZE10PD2CLU)

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PD2CLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PD2CLU holder is supplied.

€287.35

€287.35

Disponibile 2
Garanzia di 36 mesi
Main image file
Art_25288.jpg
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (8")

(ramholder102 – RAM-HOL-ZE10PD2KLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PD2KLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with key
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PD2KLU holder is supplied.

€308.36

€308.36

Disponibile 0
Garanzia di 36 mesi
Main image file
RAM-HOL-ZE10PD2U
RAM Mounts Form-Fit Holder for Zebra ET51/56 (8")

(ramholder23 – RAM-HOL-ZE10PD2U)

This RAM Mounts holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PD2U:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PD2U holder is supplied.

€247.86

€247.86

Disponibile 0
Garanzia di 36 mesi
Main image file
Art_25290.jpg
RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (8")

(ramholder85 – RAM-HOL-ZE10PDCLU)

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PDCLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Input Connector: 5.5 mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PDCLU holder is supplied.

€266.34

€266.34

Disponibile 0
Garanzia di 36 mesi
Main image file
Art_25291.jpg
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (8")

(ramholder77 – RAM-HOL-ZE10PDKLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PDKLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with key
Input Connector: 5.5 mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PDKLU holder is supplied.

€283.99

€283.99

Disponibile 0
Garanzia di 36 mesi
Main image file
Art_25292.jpg
RAM Mounts Form-Fit Holder (Latch) for Zebra ET51/56 (8")

(ramholder62 – RAM-HOL-ZE10PDU)

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with rugged case.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PDU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
With Latch
Prepared for mounting additional devices such as handhelds
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PDU holder is supplied.

€231.89

€231.89

Disponibile 0
Garanzia di 36 mesi
Main image file
Art_25293.jpg
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (8")

(ramholder58 – RAM-HOL-ZE10PKLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PKLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with key
Input Connector: 5.5mm DC
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PKLU holder is supplied.

€253.74

€253.74

Disponibile 0
Garanzia di 36 mesi
Main image file
RAM-HOL-ZE10PU
RAM Mounts Form-Fit Holder (Latch) for Zebra ET51/56 (8")

(ramholder4 – RAM-HOL-ZE10PU)

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Case.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
With Latch
Prepared for mounting additional devices such as handhelds
Input Connector: 5.5mm DC
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PU holder is supplied.

€196.60

€196.60

Disponibile 1
Garanzia di 36 mesi
Main image file
Art_25295.jpg
RAM Mounts Form-Fit Holder (Latch) for Zebra ET51/56 (8")

(ramholder109 – RAM-HOL-ZE10U)

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with rugged boot.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10U:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
With Latch
Additional mounting plate for attaching additional devices or accessories
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10U holder is supplied.

€125.17

€125.17

Disponibile 0
Garanzia di 36 mesi
Main image file
Art_25296.jpg
RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (10")

(ramholder86 – RAM-HOL-ZE11CLU)

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 10.1“ Series with rugged boot.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11CLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11CLU holder is supplied.

€162.98

€162.98

Disponibile 0
Garanzia di 36 mesi
Main image file
Art_25297.jpg
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (10")

(ramholder78 – RAM-HOL-ZE11KLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 10.1“ Series with rugged boot.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11KLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with keys
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11KLU holder is supplied.

€197.44

€197.44

Disponibile 0
Garanzia di 36 mesi
Main image file
Art_25298.jpg
RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (10")

(ramholder34 – RAM-HOL-ZE11PCLU)

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PCLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Input Connector: 5.5mm DC
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PCLU holder is supplied.

€253.74

€253.74

Disponibile 0
Garanzia di 36 mesi
Main image file
RAM-HOL-ZE11PD2CLU
RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (10")

(ramholder24 – RAM-HOL-ZE11PD2CLU)

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PD2CLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PD2CLU holder is supplied.

€305.00

€305.00

Disponibile 0
Garanzia di 36 mesi
Main image file
RAM-HOL-ZE11PD2KLU
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (10")

(ramholder6 – RAM-HOL-ZE11PD2KLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PD2KLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with key
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PD2KLU holder is supplied.

€326.01

€326.01

Disponibile 0
Garanzia di 36 mesi
Main image file
RAM-HOL-ZE11PD2U
RAM Mounts Form-Fit Holder for Zebra ET51/56 (10")

(ramholder5 – RAM-HOL-ZE11PD2U)

This RAM Mounts holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PD2U:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PD2U holder is supplied.

€266.34

€266.34

Disponibile 0
Garanzia di 36 mesi
Main image file
Art_25302.jpg
RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (10")

(ramholder35 – RAM-HOL-ZE11PDCLU)

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PDCLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PDCLU holder is supplied.

€280.63

€280.63

Disponibile 0
Garanzia di 36 mesi
Main image file
RAM-HOL-ZE11PDKLU
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (10")

(ramholder3 – RAM-HOL-ZE11PDKLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PDKLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with key
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PDKLU holder is supplied.

€305.84

€305.84

Disponibile 0
Garanzia di 36 mesi
Main image file
Art_25191.jpg
RAM Mounts Form-Fit Holder for Zebra ET51/56 (10")

(ramholder112 – RAM-HOL-ZE11PDU)

This RAM Mounts holder is suitable for Zebra ET5x 10.1“ Series with rugged boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PDU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Input Connector: 5.5mm DC-Connector
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PDU holder is supplied.

€248.70

€248.70

Disponibile 0
Garanzia di 36 mesi
Main image file
Art_25304.jpg
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (10")

(ramholder49 – RAM-HOL-ZE11PKLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PKLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with key
Input Connector: 5.5mm DC
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PKLU holder is supplied.

€268.03

€268.03

Disponibile 0
Garanzia di 36 mesi
Main image file
RAM-HOL-ZE11PU
RAM Mounts Form-Fit Holder (Latch) for Zebra ET51/56 (10")

(ramholder25 – RAM-HOL-ZE11PU)

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET5x 10.1“ with rugged boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
With Latch
Prepared for mounting additional devices such as handhelds
Input Connector: 5.5mm DC-Connector
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PU holder is supplied.

€208.36

€208.36

Disponibile 0
Garanzia di 36 mesi
Main image file
RAM-HOL-ZE11U
RAM Mounts Form-Fit Holder (Latch) for Zebra ET51/56 (10")

(ramholze11 – RAM-HOL-ZE11U)

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET5x 10.1“.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11U:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
With Latch
Prepared for mounting additional devices such as handhelds
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11U holder is supplied.

€141.13

€141.13

Disponibile 0
Garanzia di 36 mesi
Main image file
RAM-HOL-ZE21PD2U
RAM Mounts EZ-Roll'r Holder for Zebra ET40/45 (10")

(ramet4t-2 – RAM-HOL-ZE21PD2U)

This RAM Mounts EZ-Roll‘r holder is suitable for Zebra ET40 & ET45 10“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE21PD2U:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional informations:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE21U.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCK-ZE21PD2U.

Devices shown are not included in the delivery.
Only the RAM-HOL-ZE21PD2U holder is supplied.

€248.70

€248.70

Disponibile 0
Garanzia di 36 mesi
Zebra PowerPack battery charging station, 4 slots

(syet5chg4 – SAC-ET5X-4PPK1-01)

PowerPack battery charging station, 4 slots, order separately: power supply, DC cable, power cord, fits for: ET5X, ET4X & ET8X PowerPack

€162.17

€162.17

Disponibile 4
Garanzia di 1 mese
Zebra ET5x Rugged Frame

(syet5xframio – SG-ET5X-10RCSE4-01)

ET5x Rugged Frame with I/O connector, for 10'' tablets, compatible with extended batteries and Handle/Shoulder Straps

€223.33

€223.33

Disponibile 0
Nessuna garanzia
Zebra rugged frame, 8''

(syet5xhols – SG-ET5X-8RCSE2-02)

Rugged Frame, incl.: rugged I/O connector, fits for: ET5X (8'')

€216.24

€216.24

Disponibile 25
Garanzia di 36 mesi
Zebra handle strap

(syet50strap – SG-ET5X-HNDSTP-01)

Handle strap, order separately: rugged frame, D-Clips, fits for: ET5X

€24.02

€24.02

Disponibile 451
Garanzia di 3 mesi
Zebra shoulder strap

(syet5xsstrap – SG-ET5X-SHDRSTP-01)

Zebra shoulder strap, fits for: ET5X

€54.05

€54.05

Disponibile 257
Garanzia di 3 mesi
Zebra stylus, confezione da 3

(sytc70stylus – SG-TC7X-STYLUS-03)

Stilo, incluso: cavo a spirale, confezione da 3, adatto per: TC51, TC56, TC7X, TC8000, MC3300, ET51/56 (Android), ET50/55 (Android), MC9300.

€54.05

€54.05

Disponibile 243
Garanzia di 12 mesi
Zebra Service, ET5x

(syaeet5xxx-3c – Z1AE-ET5XXX-3C00)

3 Year Zebra OneCare Essential. Includes Comprehensive Coverage.

€524.25

€524.25

Disponibile
Nessuna garanzia
Zebra Service, OneCare Essential, 5 Years

(syaeet5xxx-5c – Z1AE-ET5XXX-5C00)

Zebra OneCare Essential, with Comprehensive Coverage, 5 Years, fits for: ET5X

€825.51

€825.51

Disponibile
Nessuna garanzia
Main image file
Z1B5-EMH250-5000.jpg
Zebra service TSS, supporto software, 5 anni

(syb5emh250-50 – Z1B5-EMH250-5000)

Supporto tecnico e software Zebra OneCare (TSS), durata: 5 anni, incluso: supporto telefonico, manutenzione software, prezzo per dispositivo

€160.91

€160.91

Disponibile
Nessuna garanzia
Zebra service

(ettocereet5-2c – Z1RE-ET5XXX-2C00)

OneCare Essential, 2 Jahre, renewal, ET5XXX

€351.07

€351.07

Disponibile
Nessuna garanzia
Zebra expansion module, 2D, Android, 10''

(syet5x10scn7-02 – ZBK-ET5X-10SCN7-02)

Expansion module, SE4770 barcode scanner (1D, 2D), range: 1.6 inch to 36.3 inch, rotating hand strap, fits for: ET51/ET56 (Android, 10'')

€860.32

Questo articolo sarà rimosso dall'assortimento! Blocca subito le ultime scorte rimaste!

€860.32

Disponibile 15
Garanzia di 3 mesi

Scheda dati e altro

Le offerte e i tempi di consegna indicati non sono vincolanti e sono validi solo per i rivenditori. I prezzi sono in EUR, IVA esclusa e soggetti a modifiche. Salvo errori.

* The discount refers to the original sales price.

CEO ONLINE – Chiedimi qualsiasi cosa!

Apri la finestra della chat, avvia una nuova conversazione e seleziona CEO in Reparto.