€844.05
(prezzo al dettaglio consigliato)- Business tablets with an integrated enterprise scanner
- Capacitive 8" or 10" multi-touch display with Corning Gorilla Glass
- IP65- and MIL-STD-810H-certified, suited for office service and field service
- Wi-Fi 6, 5G, Bluetooth 5.1 (BLE), NFC and GPS (ET45 only)
- Supports the tools of »Mobility DNA«
Description
Description
(synt1250w – PWR-BGA12V50W0WW)
€58.85
€58.85
(mobsstrap – 001027)
€17.49
€17.49
(mob001089 – 001089)
Universal Hypalon D-Rings, 4 peaces
€9.95
€9.95
Mobilis Cavo di connessione, USB
(mob020013 – 020013)
€9.16
€9.16
(mob036276 – 036276)
€33.33
Questo articolo sarà rimosso dall'assortimento! Blocca subito le ultime scorte rimaste!
€33.33
(mob063022 – 063022)
Protective Case, incl.: rotating tripod and handle, fits for: ET40, ET45 (8")
€79.16
€79.16
(mob063023 – 063023)
Protective Case, reinforced, Rotating Handle Tripod, fits for: ET40, ET45 (10")
€79.16
€79.16
(mob065026 – 065026)
Case PROTECH, fits for: ET40, ET45 (8" devices)
€39.16
€39.16
(mob065027 – 065027)
Case PROTECH, fits for: ET40, ET45 (10" devices)
€44.16
€44.16
(brd216312 – 216312)
€54.61
€54.61
(brd216313 – 216313)
€46.21
€46.21
(brd216316 – 216316)
€54.61
€54.61
(brd216317 – 216317)
€46.21
€46.21
(brd216331 – 216331)
€117.64
€117.64
(brd216376 – 216376)
Active Holder, for devices without rugged boot, AMPS, VESA75, order separately: power supply, fits for: ET40, ET45 (8")
€126.04
€126.04
(brd216377 – 216377)
Active Holder, for devices without rugged boot, AMPS, VESA75, order separately: power supply, USB-Host, fits for: ET40, ET45 (8")
€176.46
€176.46
(brd216378 – 216378)
Active Holder, for devices with rugged boot, AMPS, VESA75, order separately: power supply, fits for: ET40, ET45 (8")
€126.04
€126.04
(brd216379 – 216379)
Active Holder, for devices with rugged boot, AMPS, VESA75, order separately: power supply, USB-Host, fits for: ET40, ET45 (8")
€176.46
€176.46
(brd216380 – 216380)
Active Holder, for devices with rugged boot and Zebra expansion back, order separately: power supply, fits for: ET40, ET45 (8")
€159.66
€159.66
(brd216381 – 216381)
Active Holder, for devices with rugged boot and Zebra expansion back, order separately: power supply, USB-Host, fits for: ET40, ET45 (8")
€210.08
€210.08
(brd216382 – 216382)
Active Holder, for devices without rugged boot, AMPS, VESA 75, order separately: power supply, fits for: ET40, ET45 (10")
€126.04
€126.04
(brd216383 – 216383)
Active Holder, for devices without rugged boot, USB-Host, AMPS, VESA 75, order separately: power supply, fits for: ET40, ET45 (10")
€176.46
€176.46
(brd216385 – 216385)
Active Holder, requires: rugged boot, AMPS, VESA 75x75, order separately: power supply, fits for: ET40, ET45 (10")
€176.46
€176.46
(brd216386 – 216386)
Active Holder, fits devices with rugged boot and expansion back, fits for: ET40, ET45 (10")
€159.66
€159.66
(brd243570 – 243570)
Mounting Kit, incl.: Table clamp, 2 x Mounting arm, passive mount for 10" ET4x
€159.66
€159.66
(ett3ptygj-5 – 3PTY-GJ-7160-1807-00)
Gamber Johnson vehicle charging-/communication station, interfaces: 2x USB-A, drilling: VESA 75 and AMPS, order separately: vehicle adapter, vehicle mounting, fits for: ET40/45 (10" with rugged boot)
€363.09
€363.09
(ett3ptygj-20 – 3PTY-GJ-7300-0467)
Forklift power supply, 20-60VDC, fits for: Gamber Johnson Cradles
€317.59
€317.59
(syet4scrprot – 3PTY-INF-ZEB-ET4X10)
Zebra InfoCase Screen protector, tempered glass, fits for: ET4X (10 inch)
€35.49
€35.49
(syproclipcrd-8 – 3PTY-PCLIP-216384)
ProClip Charge Only Vehicle Cradle, VESA 75, AMPS, order separately: protective boot and power supply, fits for: ET4X (10")
€163.80
€163.80
(systrap – 58-40000-007R)
€17.14
€17.14
(brd710320 – 710320)
€84.03
€84.03
(brd712320 – 712320)
€176.46
€176.46
(brd712330 – 712330)
€210.08
€210.08
(brd712332 – 712332)
€210.08
€210.08
(brd713326 – 713326)
€243.69
€243.69
(brd713330 – 713330)
€218.48
€218.48
(brd713332 – 713332)
€226.88
€226.88
(brd736324 – 736324)
Active Holder, for fixed installation, fits devices with Rugged Boot or exoskeleton, AMPS and VESA75, key-lock, USB-Host, fits for: ET40, ET45
€285.71
€285.71
(brd736326 – 736326)
Active Holder, fixed installation, requires rugged boot, VESA 75, AMPS, 12V DC, USB Host, lockable, includes two keys, fits for: ET40, ET45 (10")
€294.11
€294.11
(brd736333 – 736333)
Active Holder with lock, for fixed installation, for devices with rugged boot, compatible with expansion back, fits for: ET40, ET45 (10")
€327.72
€327.72
(brd739317 – 739317)
€126.04
€126.04
(brd739318 – 739318)
€126.04
€126.04
(brd739320 – 739320)
€134.45
€134.45
(brd739332 – 739332)
Passive Holder, Lockable, requires protective boot, incl. two keys, AMPS, VESA 75, fits for: ET4x (10")
€168.06
€168.06
(brd747333 – 747333)
Active Holder, fixed installation, spring-lock, requires rugged boot, fits for: ET40, ET45 (10")
€319.32
€319.32
(syet4xtada – ADP-ET4X-10T4S1-04)
T adapter, pack of 4, for 10'' tablets, fits for: multi slot cradles
€57.34
€57.34
(syet4xtada8 – ADP-ET4X-8T4S1-04)
€57.34
€57.34
(syet4xmbrack – BRKT-ET4X-DSKPS-01)
€16.52
€16.52
(syet4xbat – BTRY-ET4X-10IN1-01)
€144.82
€144.82
(syet4xbat8 – BTRY-ET4X-8IN1-01)
€125.38
€125.38
(syet50bat2 – BTRY-ET5X-PRPK2-01)
PowerPack battery, order separately: expansion module, fits for: ET5X, ET4X
€258.27
€258.27
(syet4dcl – CBL-DC-388A2-01)
€12.29
€12.29
(syet41crd – CRD-ET4X-1SCG1-01)
ET4X 1-Slot Charging Cradle, no data transfer, order separately: Power Supply, DC-Cable and AC-Cable, fits for: ET40, ET45, ET401
€272.30
€272.30
(syet41ccrd-5 – CRD-ET4X-1SNWS-02)
Workstation Connect Cradle, 1x HDMI, 1x Ethernet, 4x USB Type A, 3.5mm Headset Jack, requires MDNA Enterprise license on device to support Zebra Workstation Connect Software features, order separately: Power Supply, AC and DC cable, fits for: ET4X
€578.33
€578.33
(syet44chgcrd – CRD-ET4X-4S10I1-01)
ET4X 4-Slot Charging Cradle, no data transfer, order separately: Power Supply, DC-Cable and AC-Cable, fits for: 10'' ET40 / ET45, 10'' ET40HC / ET45HC / ET401
€808.82
€808.82
(syet44chgcrd2 – CRD-ET4X-4S8I1-01)
ET4X 4-Slot Charging Cradle, no data transfer, order separately: Power Supply, DC-Cable and AC-Cable, fits for: 8'' ET40, ET45, ET401
€808.82
€808.82
(syet4xcrdcup – CRDCUP-4S-ET5TOET4)
ET4X Four Slot Cradle Convertion Cup Kit for change from ET5X ShareCradle, includes one cup, order separately: T-adapter
€102.17
€102.17
(jtbindszt – jtbindszt)
€9.42
€9.42
(sytc7xtether – KT-TC7X-TETHR1-03)
Set of three wrapped tethers for pen.
€36.04
€36.04
(syet4batcov – MISC-ET4X-BTDPS-01)
Battery Door with Presentation Stand, fits for: ET4x (10")
€73.71
€73.71
(syet4x – MISC-ET4X-PBTDS-01)
Zebra Battery Door Adapter for presentation stand in portrait orientation, fits for: ET4x 10"
€72.35
€72.35
(ramgdsdock-2 – RAM-GDS-DOCK-ZE20PD2U)
This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCK-ZE20PD2U:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-ZE20PD2U holder is supplied.
€291.55
€291.55
(ramgdsdock-3 – RAM-GDS-DOCK-ZE20PDU)
This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCK-ZE20PDU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-ZE20PDU holder is supplied.
€276.43
€276.43
(ramgdsdock-28 – RAM-GDS-DOCK-ZE20PU)
This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCK-ZE20PU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Input Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-ZE20PU holder is supplied.
€190.71
€190.71
(ramgdsdock-4 – RAM-GDS-DOCK-ZE21PD2U)
This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCK-ZE21PD2U:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-ZE21PD2U holder is supplied.
€290.71
€290.71
(ramholder106 – RAM-GDS-DOCK-ZE21PDU)
This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCK-ZE21PDU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-ZE21PDU holder is supplied.
€275.59
€275.59
(ramgdsdock-5 – RAM-GDS-DOCK-ZE21PU)
This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCK-ZE21PU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Input Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-ZE21PU holder is supplied.
€189.87
€189.87
(ramholder81 – RAM-GDS-DOCKL-ZE20PD2U)
This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCKL-ZE20PD2U:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Lockable with Keys
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-ZE20PD2U holder is supplied.
€350.38
€350.38
(ramholder110 – RAM-GDS-DOCKL-ZE20PDU)
This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCKL-ZE20PDU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Lockable with Keys
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-ZE20PDU holder is supplied.
€335.25
€335.25
(ramgdsdock-26 – RAM-GDS-DOCKL-ZE20PU)
This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCKL-ZE20PU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Lockable with Keys
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Input Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-ZE20PU holder is supplied.
€250.38
€250.38
(ramgdsdock-6 – RAM-GDS-DOCKL-ZE21PD2U)
This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCKL-ZE21PD2U:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Lockable with Keys
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-ZE21PD2U holder is supplied.
€359.62
€359.62
(ramholder96 – RAM-GDS-DOCKL-ZE21PDU)
This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCKL-ZE21PDU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Lockable with Keys
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-ZE21PDU holder is supplied.
€345.34
€345.34
(ramgdsdock-7 – RAM-GDS-DOCKL-ZE21PU)
This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCKL-ZE21PU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Lockable with Keys
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Input Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-ZE21PU holder is supplied.
€257.10
€257.10
(ramgdsdock-17 – RAM-GDS-DOCKNLL-ZE20PU)
This RAM Mounts GDS Form-Fit (Latch) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCKNLL-ZE20PU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
With Latch
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Input Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKNLL-ZE20PU holder is supplied.
€209.20
€209.20
(ramgdsdock-18 – RAM-GDS-DOCKNLL-ZE21PU)
This RAM Mounts GDS Form-Fit (Latch) holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCKNLL-ZE21PU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
With Latch
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Input Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKNLL-ZE21PU holder is supplied.
€214.24
€214.24
(ramholder8 – RAM-HOL-ZE20PD2KLU)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET4x 8“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE20PD2KLU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Lockable with key
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20LU.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCKL-ZE20PD2U.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE20PD2KLU holder is supplied.
€302.48
€302.48
(ramholder7 – RAM-HOL-ZE20PD2U)
This RAM Mounts EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE20PD2U:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, FCC, WEEE, CE & UKCA
Additional informations:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20U.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCK-ZE20PD2U.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE20PD2U holder is supplied.
€239.45
€239.45
(ramholder79 – RAM-HOL-ZE20PDKLU)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET4x 8“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE20PDKLU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Lockable with key
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20LU.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCKL-ZE20PDU.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE20PDKLU holder is supplied.
€271.39
€271.39
(ramholder99 – RAM-HOL-ZE20PDU)
This RAM Mounts EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE20PDU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional informations:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20U.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCK-ZE20PDU.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE20PDU holder is supplied.
€204.16
€204.16
(ramholder83 – RAM-HOL-ZE20PKLU)
This RAM Mounts EZ-Roll‘r (key-locking) holder is suitable for Zebra ET4x 8“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE20PKLU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Lockable with key
Input Connector: 5.5mm DC
Input Cable Length: ca. 100 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20LU.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE20PKLU holder is supplied.
€270.55
€270.55
(ramholet4x-2 – RAM-HOL-ZE20PNLLU)
This RAM Mounts Form-Fit (latch) holder is suitable for Zebra ET4x 8“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE20PNLLU:
Compatible with PowerPack batterie
Easy insertion and removal
With Latch
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Input Connector: 5.5mm DC
Input Cable Length: ca. 100 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20LU.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCKNLL-ZE20PU.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE20PNLLU holder is supplied.
€212.56
€212.56
(ramholet4x – RAM-HOL-ZE20PU)
This RAM Mounts EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE20PU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Input Connector: 5.5mm DC
Input Cable Length: ca. 100 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20U.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE20PU holder is supplied.
€191.55
€191.55
(ramet4t – RAM-HOL-ZE21PD2KLU)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET4x 10“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE21PD2KLU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Lockable with key
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE21LU.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCKL-ZE21PD2U.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE21PD2KLU holder is supplied.
€319.29
€319.29
(ramtdock – RAM-HOL-ZE21PDKLU)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET4x 10“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE21PDKLU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Lockable with key
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE21LU.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCKL-ZE21PDU.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE21PDKLU holder is supplied.
€283.15
€283.15
(ramtdock-2 – RAM-HOL-ZE21PDU)
This RAM Mounts EZ-Roll‘r holder is suitable for Zebra ET40 & ET45 10“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE21PDU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional informations:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE21U.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCK-ZE21PDU.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE21PDU holder is supplied.
€211.72
€211.72
(ramholet4-2 – RAM-HOL-ZE21PKLU)
Questo supporto RAM Mounts Form-Fit (con blocco a chiave) è adatto per la serie Zebra ET40, ET45 da 10" e ET401 (10") con Rugged Boot.
Il supporto è alimentato da una connessione DC da 5,5 mm e carica il dispositivo nel dock.
Per inserire il dispositivo, posizionare la parte inferiore del dispositivo nella staffa e premere fino a quando non scatta in posizione.
Le aperture sui pulsanti e sulle porte consentono di continuare a utilizzarli senza problemi.
La staffa consente inoltre di continuare a utilizzare la funzione di scansione del tablet grazie all'apertura sul retro.
Gli accessori per tablet come le batterie PowerPack possono anche essere riposti all'interno.
La parte posteriore del supporto per dispositivi è predisposta per supportare una base VESA 75x75 mm o una base a sfera tonda (non inclusa).
Caratteristiche del prodotto RAM Mounts RAM-HOL-ZE21PKLU:
Compatibile con batterie PowerPack
Facile inserimento e rimozione
Piastra di montaggio aggiuntiva per il fissaggio di ulteriori dispositivi o accessori
Solo per tablet Zebra all'interno di Rugged Boot
Bloccabile con chiave
Connettore di ingresso: DC 5,5 mm
Lunghezza del cavo di ingresso: circa 100 cm
Certificazioni: RoHS, WEEE, CE e UKCA
Informazioni aggiuntive:
Per supportare il tablet senza il telaio robusto, vedere RAP-INSERT-ZE21LU.
Questo dock non è compatibile con IntelliSkin.
Per IntelliSkin con GDS Tech, vedere RAM-GDS-DOCKL-ZE21PU.
I dispositivi mostrati non sono inclusi nella fornitura.
Viene fornito solo il supporto RAM-HOL-ZE21PKLU.
€265.50
€265.50
(ramholder114 – RAM-HOL-ZE21PNLLU)
This RAM Mounts Form-Fit (latch) holder is suitable for Zebra ET4x 10“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE21PNLLU:
Compatible with PowerPack batterie
Easy insertion and removal
With Latch
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Input Connector: 5.5mm DC
Input Cable Length: ca. 100 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE21LU.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCKNLL-ZE21PU.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE21PNLLU holder is supplied.
€223.49
€223.49
(ramholet4 – RAM-HOL-ZE21PU)
This RAM Mounts EZ-Roll‘r holder is suitable for Zebra ET40 & ET45 10“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE21PU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Boot
Input Connector: 5.5mm DC
Input Cable Length: ca. 100 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To support the tablet without the Rugged Frame, see RAP-INSERT-ZE21U.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE21PU holder is supplied.
€198.28
€198.28
(syet5chg4 – SAC-ET5X-4PPK1-01)
PowerPack battery charging station, 4 slots, order separately: power supply, DC cable, power cord, fits for: ET5X, ET4X & ET8X PowerPack
€162.17
€162.17
(syet4boot – SG-ET4X-10EXOSKL1-01)
ET4x Rugged Boot, fits for: 10'' ET4x
€103.93
€103.93
(syet4boot2 – SG-ET4X-8EXOSKL1-01)
Zaino robusto per ET4x, adatto per: ET40 / ET45 da 8''
€103.93
€103.93
(syet4dclip – SG-ET4X-DCLIPS-01)
ET4X D-Clips, for use of shoulder strap on Rugged Boot, fits for: ET4x
€30.46
€30.46
(syet50strap – SG-ET5X-HNDSTP-01)
€24.02
€24.02
(syet5xsstrap – SG-ET5X-SHDRSTP-01)
€54.05
€54.05
(stageit-l – Stageit-l)
Contact us and book our Staging Premium Service
€60.00
€60.00
(stageit-m – Stageit-m)
Contact us and book our Staging Premium Service
€30.00
€30.00
(stageit-s – Stageit-s)
Contact us and book our Staging Premium Service
€10.00
€10.00
(stageit-xl – Stageit-xl)
Contact us and book our Staging Premium Service
€240.00
€240.00
Scheda dati e altro
* The discount refers to the original sales price.