- Tablette 2-en-1 robuste avec clavier détachable
- Écran tactile QHD 12" de 800 nits avec verre Corning Gorilla Glass
- Processeurs Intel Core i5/i7 de 11e génération, batterie lithium-polymère de 5 180 mAh
- Certifié IP65 et e-Mark, résistant aux chocs jusqu'à 1,5 m (avec coque de protection)
- USB-C, Wi-Fi 6, Bluetooth 5.2, NFC et Ethernet en option ; ET85 : 5G et GPS
Product detail sub menu
Description
Description
Les ET80/ET85 comprennent en outre de puissants processeurs Intel Core i5 ou i7 de 11e génération, ainsi que 8 ou 16 Go de mémoire RAM et 128, 256 ou 512 Go de SSD. La batterie lithium-ion remplaçable de 5 180 mAh avec technologie PowerPrecision+ assure de longues autonomies. Une batterie remplaçable à chaud de 3 400 mAh avec jusqu'à 11 heures d'autonomie est disponible en option. De plus, les tablettes offrent une caméra frontale 5 mégapixels Windows Hello et une caméra arrière couleur 13 mégapixels avec autofocus et flash LED contrôlé par l'utilisateur. Selon les besoins, un scanner 2D intégré avec moteur de scan SE4107 et un lecteur d'empreintes digitales Windows Hello sont également disponibles. Le scanner, qui lit également les codes-barres mal imprimés, endommagés et rayés, est situé dans le coin inférieur droit des tablettes ET80/ET85. Pour le personnel des services publics, cela offre l'avantage de scanner plus facilement les documents, même lorsque la tablette est dans le véhicule.
La large sélection d'interfaces garantit un transfert de données fluide et une connectivité élevée. Cela comprend USB-A 3.2, USB-C, Wi-Fi 6, Bluetooth 5.2, NFC et Ethernet en option. L'ET85 offre en plus la 5G et le GPS ainsi qu'une nano et une eSIM. Les tablettes sont équipées de deux haut-parleurs et de quatre microphones avec réduction du bruit. Que ce soit lors d'un appel bidirectionnel (push-to-talk) ou d'un appel vidéo, lors de la dictée de notes ou de l'utilisation de commandes vocales, chaque mot est compris. Lors de la conception des tablettes 2-en-1 ET80/ET85, Zebra s'est concentré sur une conception sans ventilateur avec une grande durabilité. Elles sont entièrement protégées contre la poussière et les jets d'eau selon la norme IP65 et résistent aux chocs conformément aux normes MIL-STD-810H et MIL-STD 461G à partir de 1,2 m ou 1,5 m avec la housse de protection en option. Grâce à la certification Class 1 Division 2, les tablettes ET80 et ET85 peuvent également être utilisées en toute sécurité à proximité de matières dangereuses inflammables.
Pour des performances encore plus grandes et une efficacité accrue, les tablettes ET80/ET85 accèdent aux outils Zebra Mobility DNA et Scanning DataCapture DNA. Ceux-ci incluent Workforce Connect avec diverses fonctions de communication bidirectionnelle (push-to-talk) et de messagerie texte, ainsi que 123Scan pour la reconnaissance automatisée et la configuration simplifiée du scanner intégré.
(brd216229 – 216229)
€67.22
€67.22
(brd217039 – 217039)
Holder, Key-Lock, USB-C 3.1, AMPS, VESA 75, order separately: Power Supply, fits for: ET80, ET85
€168.06
€168.06
(brd217040 – 217040)
Holder, Spring-Lock, USB-C 3.1, AMPS, VESA 75, order separately: Power Supply, fits for: ET80, ET85
€151.25
€151.25
(zcabadap – 450143)
€26.72
€26.72
(brd710296 – 710296)
€159.66
€159.66
(brd710297 – 710297)
€142.85
€142.85
(brd710301 – 710301)
€134.45
€134.45
(brd710302 – 710302)
€117.64
€117.64
(brd739296 – 739296)
€218.48
€218.48
(brd739297 – 739297)
€201.67
€201.67
(brd739301 – 739301)
€184.87
€184.87
(brd739302 – 739302)
€176.46
€176.46
(brd741296 – 741296)
€201.67
€201.67
(brd741297 – 741297)
€184.87
€184.87
(brd741301 – 741301)
€176.46
€176.46
(brd741302 – 741302)
€159.66
€159.66
(zet80bat – BTRY-ET8X-12IN1-01)
€166.34
€166.34
(zet80bat2 – BTRY-ET8X-PRPK1-01)
€256.07
€256.07
(zet80rj45cab – CBL-ET8X-E1-01)
€47.51
€47.51
(zet80dock9 – CRD-ET8X-M-9PEM1-01)
€594.00
€594.00
(zet80dockfan – CRD-ET8X-M-FAN1-01)
€237.62
€237.62
(zet80dockbra – CRD-ET8X-M-KBBK1-01)
€225.72
€225.72
(zet80dockcov – CRD-ET8X-M-PEMCV1-01)
€95.05
€95.05
(zet80dockant – CRD-ET8X-M-PTA1-01)
€380.17
€380.17
(zet80offdock – CRD-ET8X-OFFDK1-01)
€950.39
€950.39
(zet80pdock – CRD-ET8X-PWRDK1-01)
€475.20
€475.20
(zet80vdock – CRD-ET8X-VEHDK1-01)
€772.20
€772.20
(zet80keybde – KYB-ET8X-2IN1-DE1-01)
€534.61
€534.61
(zet80keybes – KYB-ET8X-2IN1-ES1-01)
€534.61
€534.61
(zet80keybfr – KYB-ET8X-2IN1-FR1-01)
€534.61
€534.61
(zet80keybnor – KYB-ET8X-2IN1-NO1-01)
€474.89
€474.89
(zet80keybuk – KYB-ET8X-2IN1-UK1-01)
€534.61
€534.61
(zet80keybus – KYB-ET8X-2IN1-US1-01)
€534.61
€534.61
(zet80batdoor – MISC-ET8X-BTDR1-01)
€47.51
€47.51
(zet80ps-2 – PWR-BGA15V45W-UC2-WW)
Zebra Power Supply, USB-C, 15V, 3A, 45W, order separately: Power Cord (C5), fits for: ET60, ET65, ET80, ET85
€51.72
€51.72
(ramholder63 – RAM-HOL-ZE22LU)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET80 & ET85 2-in-1 Tablet with or without Rugged Boot and Keyboard.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE22LU:
Compatible with accessories
Easy insertion and removal
Lockable with key
Additional mounting plate for attaching additional devices or accessories
Usable with RAM Vent-Temp, Temp Right or NFC-Repeater
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE22LU holder is supplied.
€276.43
€276.43
(ramholze22pd2lu – RAM-HOL-ZE22PD2LU)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET8x 2-in-1 Tablet with or without Rugged Boot and Keyboard.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in Dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE22PD2LU:
Compatible with accessories
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Usable with RAM Vent-Temp, Temp-Right or NFC-Repeater
Lockable with key
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE22PD2LU holder is supplied.
€456.26
€456.26
(ramholder51 – RAM-HOL-ZE22PD2U)
This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET8x 2-in-1 Tablet with or without Rugged Boot and Keyboard.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE22PD2U:
Compatible with accessories
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Usable with RAM Vent-Temp, Temp- Right or NFC-Repeater
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE22PD2U holder is supplied.
€406.68
€406.68
(ramholder57 – RAM-HOL-ZE22PDLU)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET8x 2-in-1 Tablet with or without Rugged Boot and Keyboard.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE22PDLU:
Compatible with accessories
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Usable with RAM Vent-Temp, Temp-Right or NFC-Repeater
Lockable with key
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE22PDLU holder is supplied.
€414.24
€414.24
(ramholze22pdu – RAM-HOL-ZE22PDU)
This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET8x 2-in-1 Tablet with or without Rugged Boot and Keyboard.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE22PDU:
Compatible with accessories
Easy insertion and removal
With Latch
Additional mounting plate for attaching additional devices or accessories
Usable with RAM Vent-Temp, Temp- Right or NFC-Repeater
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE22PDU holder is supplied.
€368.03
€368.03
(ramholder103 – RAM-HOL-ZE22PLU)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET80 & ET85 2-in-1 Tablet with or without Rugged Boot and Keyboard.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE22PLU:
Compatible with accessories
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Usable with RAM Vent-Temp, Temp Right or NFC-Repeater
Lockable with key
Input Connector: 5.5mm DC
Input Cable Length: ca. 100 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE22PLU holder is supplied.
€348.70
€348.70
(ramet8dock – RAM-HOL-ZE22PU)
This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET80 & ET85 2-in-1 Tablet with or without Rugged Boot and Keyboard.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE22PU:
Compatible with accessories
Easy insertion and removal
With Latch
Additional mounting plate for attaching additional devices or accessories
Usable with RAM Vent-Temp, Temp Right or NFC-Repeater
Input Connector: 5.5mm DC
Input Cable Length: ca. 100 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE22PU holder is supplied.
€299.96
€299.96
(ramet8tab – RAM-HOL-ZE22U)
This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET80 & ET85 2-in-1 Tablet with or without Rugged Frame and Keyboard.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE22U:
Compatible with accessories
Easy insertion and removal
With Latch
Additional mounting plate for attaching additional devices or accessories
Usable with RAM Vent-Temp, Temp Right or NFC-Repeater
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE22U holder is supplied.
€231.05
€231.05
(syet5chg4 – SAC-ET5X-4PPK1-01)
€162.17
€162.17
(zet80boot – SG-ET8X-BOOT1-01)
€237.62
€237.62
(zet80handle – SG-ET8X-HANDLE1-01)
€62.96
€62.96
(zet80sph – SG-ET8X-PENLOOP1-01)
€20.38
€20.38
(zet80sstrap – SG-ET8X-SHLDR1-01)
€47.51
€47.51
(zet80stlyus – SG-ET8X-STYLUS1-01)
€118.79
€118.79
(stageit-l – Stageit-l)
Contact us and book our Staging Premium Service
€60.00
€60.00
(stageit-m – Stageit-m)
Contact us and book our Staging Premium Service
€30.00
€30.00
(stageit-s – Stageit-s)
Contact us and book our Staging Premium Service
€10.00
€10.00
(stageit-xl – Stageit-xl)
Contact us and book our Staging Premium Service
€240.00
€240.00
(syaeet8x-3c – Z1AE-ET8XXX-3C00)
€238.88
€238.88
Fiche technique & plus
* La réduction s'applique au prix de vente initial.