€804.76
(prix de vente conseillé)- Business tablets with an integrated enterprise scanner
- Capacitive 8" or 10" multi-touch display with Corning Gorilla Glass
- IP65- and MIL-STD-810H-certified, suited for office service and field service
- Wi-Fi 6, 5G, Bluetooth 5.1 (BLE), NFC and GPS (ET45 only)
- Supports the tools of »Mobility DNA«
Description
Description
(ramgdsdock-26 – RAM-GDS-DOCKL-ZE20PU)
This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCKL-ZE20PU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Lockable with Keys
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Input Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-ZE20PU holder is supplied.
€250.38
€250.38
(mob036276 – 036276)
€33.33
Cet article sera retiré de la gamme ! Sécurisez les derniers restes de stock dès maintenant !
€33.33
(mob063022 – 063022)
Protective Case, incl.: rotating tripod and handle, fits for: ET40, ET45 (8")
€79.16
€79.16
(mob063023 – 063023)
Protective Case, reinforced, Rotating Handle Tripod, fits for: ET40, ET45 (10")
€79.16
€79.16
(mob065026 – 065026)
Case PROTECH, fits for: ET40, ET45 (8" devices)
€39.16
€39.16
(mob065027 – 065027)
Case PROTECH, fits for: ET40, ET45 (10" devices)
€44.16
€44.16
(brd216312 – 216312)
€54.61
€54.61
(brd216313 – 216313)
€46.21
€46.21
(brd216316 – 216316)
€54.61
€54.61
(brd216317 – 216317)
€46.21
€46.21
(brd216331 – 216331)
€117.64
€117.64
(brd216376 – 216376)
Active Holder, for devices without rugged boot, AMPS, VESA75, order separately: power supply, fits for: ET40, ET45 (8")
€126.04
€126.04
(brd216377 – 216377)
Active Holder, for devices without rugged boot, AMPS, VESA75, order separately: power supply, USB-Host, fits for: ET40, ET45 (8")
€176.46
€176.46
(brd216378 – 216378)
Active Holder, for devices with rugged boot, AMPS, VESA75, order separately: power supply, fits for: ET40, ET45 (8")
€126.04
€126.04
(brd216379 – 216379)
Active Holder, for devices with rugged boot, AMPS, VESA75, order separately: power supply, USB-Host, fits for: ET40, ET45 (8")
€176.46
€176.46
(brd216380 – 216380)
Active Holder, for devices with rugged boot and Zebra expansion back, order separately: power supply, fits for: ET40, ET45 (8")
€159.66
€159.66
(brd216381 – 216381)
Active Holder, for devices with rugged boot and Zebra expansion back, order separately: power supply, USB-Host, fits for: ET40, ET45 (8")
€210.08
€210.08
(brd216382 – 216382)
Active Holder, for devices without rugged boot, AMPS, VESA 75, order separately: power supply, fits for: ET40, ET45 (10")
€126.04
€126.04
(brd216383 – 216383)
Active Holder, for devices without rugged boot, USB-Host, AMPS, VESA 75, order separately: power supply, fits for: ET40, ET45 (10")
€176.46
€176.46
(brd216385 – 216385)
Active Holder, requires: rugged boot, AMPS, VESA 75x75, order separately: power supply, fits for: ET40, ET45 (10")
€176.46
€176.46
(brd216386 – 216386)
Active Holder, fits devices with rugged boot and expansion back, fits for: ET40, ET45 (10")
€159.66
€159.66
(brd243570 – 243570)
Mounting Kit, incl.: Table clamp, 2 x Mounting arm, passive mount for 10" ET4x
€159.66
€159.66
(ett3ptygj-5 – 3PTY-GJ-7160-1807-00)
Gamber Johnson vehicle charging-/communication station, interfaces: 2x USB-A, drilling: VESA 75 and AMPS, order separately: vehicle adapter, vehicle mounting, fits for: ET40/45 (10" with rugged boot)
€363.09
€363.09
(ett3ptygj-20 – 3PTY-GJ-7300-0467)
Forklift power supply, 20-60VDC, fits for: Gamber Johnson Cradles
€317.59
€317.59
(syet4scrprot – 3PTY-INF-ZEB-ET4X10)
Zebra InfoCase Screen protector, tempered glass, fits for: ET4X (10 inch)
€35.49
€35.49
(syproclipcrd-8 – 3PTY-PCLIP-216384)
ProClip Charge Only Vehicle Cradle, VESA 75, AMPS, order separately: protective boot and power supply, fits for: ET4X (10")
€163.80
€163.80
(systrap – 58-40000-007R)
€17.14
€17.14
(brd710320 – 710320)
€84.03
€84.03
(brd712320 – 712320)
€176.46
€176.46
(brd712330 – 712330)
€210.08
€210.08
(brd712332 – 712332)
€210.08
€210.08
(brd713326 – 713326)
€243.69
€243.69
(brd713330 – 713330)
€218.48
€218.48
(brd713332 – 713332)
€226.88
€226.88
(brd736324 – 736324)
Active Holder, for fixed installation, fits devices with Rugged Boot or exoskeleton, AMPS and VESA75, key-lock, USB-Host, fits for: ET40, ET45
€285.71
€285.71
(brd736326 – 736326)
Active Holder, fixed installation, requires rugged boot, VESA 75, AMPS, 12V DC, USB Host, lockable, includes two keys, fits for: ET40, ET45 (10")
€294.11
€294.11
(brd736333 – 736333)
Active Holder with lock, for fixed installation, for devices with rugged boot, compatible with expansion back, fits for: ET40, ET45 (10")
€327.72
€327.72
(brd739317 – 739317)
€126.04
€126.04
(brd739318 – 739318)
€126.04
€126.04
(brd739320 – 739320)
€134.45
€134.45
(brd739332 – 739332)
Passive Holder, Lockable, requires protective boot, incl. two keys, AMPS, VESA 75, fits for: ET4x (10")
€168.06
€168.06
(brd747333 – 747333)
Active Holder, fixed installation, spring-lock, requires rugged boot, fits for: ET40, ET45 (10")
€319.32
€319.32
(syet4xtada – ADP-ET4X-10T4S1-04)
€57.34
€57.34
(syet4xtada8 – ADP-ET4X-8T4S1-04)
€57.34
€57.34
(syet4xmbrack – BRKT-ET4X-DSKPS-01)
€16.52
€16.52
(syet4xbat – BTRY-ET4X-10IN1-01)
€144.82
€144.82
(syet4xbat8 – BTRY-ET4X-8IN1-01)
€125.38
€125.38
(syet50bat2 – BTRY-ET5X-PRPK2-01)
€258.27
€258.27
(syet4dcl – CBL-DC-388A2-01)
€12.29
€12.29
(syet41crd – CRD-ET4X-1SCG1-01)
€272.30
€272.30
(syet41ccrd-5 – CRD-ET4X-1SNWS-02)
Workstation Connect Cradle, 1x HDMI, 1x Ethernet, 4x USB Type A, 3.5mm Headset Jack, requires MDNA Enterprise license on device to support Zebra Workstation Connect Software features, order separately: Power Supply, AC and DC cable, fits for: ET4X
€578.33
€578.33
(syet44chgcrd – CRD-ET4X-4S10I1-01)
€808.82
€808.82
(syet44chgcrd2 – CRD-ET4X-4S8I1-01)
€808.82
€808.82
(syet4xcrdcup – CRDCUP-4S-ET5TOET4)
ET4X Four Slot Cradle Convertion Cup Kit for change from ET5X ShareCradle, includes one cup, order separately: T-adapter
€102.17
€102.17
(jtbindszt – jtbindszt)
€9.42
€9.42
(sytc7xtether – KT-TC7X-TETHR1-03)
Set of three wrapped tethers for pen.
€36.04
€36.04
(syet4batcov – MISC-ET4X-BTDPS-01)
Battery Door with Presentation Stand, fits for: ET40, ET45 (10")
€73.71
€73.71
(syet4x – MISC-ET4X-PBTDS-01)
Zebra Battery Door Adapter for presentation stand in portrait orientation, fits for: ET4x 10"
€72.35
€72.35
(synt1250w – PWR-BGA12V50W0WW)
€58.85
€58.85
(ramgdsdock-2 – RAM-GDS-DOCK-ZE20PD2U)
This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCK-ZE20PD2U:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-ZE20PD2U holder is supplied.
€291.55
€291.55
(ramgdsdock-3 – RAM-GDS-DOCK-ZE20PDU)
This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCK-ZE20PDU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-ZE20PDU holder is supplied.
€276.43
€276.43
(ramgdsdock-28 – RAM-GDS-DOCK-ZE20PU)
This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCK-ZE20PU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Input Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-ZE20PU holder is supplied.
€190.71
€190.71
(ramgdsdock-4 – RAM-GDS-DOCK-ZE21PD2U)
This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCK-ZE21PD2U:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-ZE21PD2U holder is supplied.
€290.71
€290.71
(ramholder106 – RAM-GDS-DOCK-ZE21PDU)
This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCK-ZE21PDU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-ZE21PDU holder is supplied.
€275.59
€275.59
(ramgdsdock-5 – RAM-GDS-DOCK-ZE21PU)
This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCK-ZE21PU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Input Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-ZE21PU holder is supplied.
€189.87
€189.87
(ramholder81 – RAM-GDS-DOCKL-ZE20PD2U)
This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCKL-ZE20PD2U:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Lockable with Keys
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-ZE20PD2U holder is supplied.
€350.38
€350.38
(ramholder110 – RAM-GDS-DOCKL-ZE20PDU)
This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCKL-ZE20PDU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Lockable with Keys
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-ZE20PDU holder is supplied.
€335.25
€335.25
(ramgdsdock-6 – RAM-GDS-DOCKL-ZE21PD2U)
This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCKL-ZE21PD2U:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Lockable with Keys
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-ZE21PD2U holder is supplied.
€359.62
€359.62
(ramholder96 – RAM-GDS-DOCKL-ZE21PDU)
This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCKL-ZE21PDU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Lockable with Keys
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-ZE21PDU holder is supplied.
€345.34
€345.34
(ramgdsdock-7 – RAM-GDS-DOCKL-ZE21PU)
This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCKL-ZE21PU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Lockable with Keys
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Input Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-ZE21PU holder is supplied.
€257.10
€257.10
(ramgdsdock-17 – RAM-GDS-DOCKNLL-ZE20PU)
This RAM Mounts GDS Form-Fit (Latch) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCKNLL-ZE20PU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
With Latch
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Input Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKNLL-ZE20PU holder is supplied.
€209.20
€209.20
(ramgdsdock-18 – RAM-GDS-DOCKNLL-ZE21PU)
This RAM Mounts GDS Form-Fit (Latch) holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCKNLL-ZE21PU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
With Latch
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Input Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKNLL-ZE21PU holder is supplied.
€214.24
€214.24
(ramholder8 – RAM-HOL-ZE20PD2KLU)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET4x 8“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE20PD2KLU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Lockable with key
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20LU.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCKL-ZE20PD2U.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE20PD2KLU holder is supplied.
€302.48
€302.48
(ramholder7 – RAM-HOL-ZE20PD2U)
This RAM Mounts EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE20PD2U:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, FCC, WEEE, CE & UKCA
Additional informations:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20U.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCK-ZE20PD2U.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE20PD2U holder is supplied.
€239.45
€239.45
(ramholder79 – RAM-HOL-ZE20PDKLU)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET4x 8“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE20PDKLU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Lockable with key
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20LU.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCKL-ZE20PDU.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE20PDKLU holder is supplied.
€271.39
€271.39
(ramholder99 – RAM-HOL-ZE20PDU)
This RAM Mounts EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE20PDU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional informations:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20U.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCK-ZE20PDU.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE20PDU holder is supplied.
€204.16
€204.16
(ramholder83 – RAM-HOL-ZE20PKLU)
This RAM Mounts EZ-Roll‘r (key-locking) holder is suitable for Zebra ET4x 8“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE20PKLU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Lockable with key
Input Connector: 5.5mm DC
Input Cable Length: ca. 100 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20LU.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE20PKLU holder is supplied.
€270.55
€270.55
(ramholet4x-2 – RAM-HOL-ZE20PNLLU)
This RAM Mounts Form-Fit (latch) holder is suitable for Zebra ET4x 8“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE20PNLLU:
Compatible with PowerPack batterie
Easy insertion and removal
With Latch
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Input Connector: 5.5mm DC
Input Cable Length: ca. 100 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20LU.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCKNLL-ZE20PU.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE20PNLLU holder is supplied.
€212.56
€212.56
(ramholet4x – RAM-HOL-ZE20PU)
This RAM Mounts EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE20PU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Input Connector: 5.5mm DC
Input Cable Length: ca. 100 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20U.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE20PU holder is supplied.
€191.55
€191.55
(ramet4t – RAM-HOL-ZE21PD2KLU)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET4x 10“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE21PD2KLU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Lockable with key
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE21LU.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCKL-ZE21PD2U.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE21PD2KLU holder is supplied.
€319.29
€319.29
(ramtdock – RAM-HOL-ZE21PDKLU)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET4x 10“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE21PDKLU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Lockable with key
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE21LU.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCKL-ZE21PDU.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE21PDKLU holder is supplied.
€283.15
€283.15
(ramtdock-2 – RAM-HOL-ZE21PDU)
This RAM Mounts EZ-Roll‘r holder is suitable for Zebra ET40 & ET45 10“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE21PDU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional informations:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE21U.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCK-ZE21PDU.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE21PDU holder is supplied.
€211.72
€211.72
(ramholet4-2 – RAM-HOL-ZE21PKLU)
Ce support RAM Mounts Form-Fit (verrouillable à clé) est adapté pour les séries Zebra ET40, ET45 10" et ET401 (10") avec boîtier renforcé (Rugged Boot).
Le support est alimenté par une connexion DC de 5,5 mm et charge l'appareil dans la station d'accueil.
Pour insérer l'appareil, placez le bas de l'appareil dans le support et appuyez-le dans le support jusqu'à ce qu'il s'enclenche.
Les découpes au niveau des boutons et des ports vous permettent de continuer à les utiliser sans problème.
Le support permet également de continuer à utiliser la fonction de scan de la tablette grâce à la découpe à l'arrière.
Les accessoires de tablette tels que les batteries PowerPack peuvent également être stockés à l'intérieur.
L'arrière du support d'appareil est préparé pour supporter une base VESA 75x75 mm ou une rotule (non incluse).
Caractéristiques du produit RAM Mounts RAM-HOL-ZE21PKLU :
Compatible avec batterie PowerPack
Insertion et retrait faciles
Plaque de montage supplémentaire pour fixer d'autres appareils ou accessoires
Uniquement pour les tablettes Zebra avec boîtier renforcé (Rugged Boot)
Verrouillable à clé
Connecteur d'entrée : DC 5,5 mm
Longueur du câble d'entrée : env. 100 cm
Certifications : RoHS, WEEE, CE et UKCA
Informations supplémentaires :
Pour supporter la tablette sans le boîtier renforcé (Rugged Frame), voir RAP-INSERT-ZE21LU.
Cette station d'accueil n'est pas compatible avec IntelliSkin.
Pour IntelliSkin avec GDS Tech, voir RAM-GDS-DOCKL-ZE21PU.
Les appareils présentés ne sont pas inclus dans la livraison.
Seul le support RAM-HOL-ZE21PKLU est fourni.
€265.50
€265.50
(ramholder114 – RAM-HOL-ZE21PNLLU)
This RAM Mounts Form-Fit (latch) holder is suitable for Zebra ET4x 10“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE21PNLLU:
Compatible with PowerPack batterie
Easy insertion and removal
With Latch
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Input Connector: 5.5mm DC
Input Cable Length: ca. 100 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE21LU.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCKNLL-ZE21PU.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE21PNLLU holder is supplied.
€223.49
€223.49
(ramholet4 – RAM-HOL-ZE21PU)
This RAM Mounts EZ-Roll‘r holder is suitable for Zebra ET40 & ET45 10“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE21PU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Boot
Input Connector: 5.5mm DC
Input Cable Length: ca. 100 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To support the tablet without the Rugged Frame, see RAP-INSERT-ZE21U.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE21PU holder is supplied.
€198.28
€198.28
(syet5chg4 – SAC-ET5X-4PPK1-01)
€162.17
€162.17
(syet4boot – SG-ET4X-10EXOSKL1-01)
€103.93
€103.93
(syet4boot2 – SG-ET4X-8EXOSKL1-01)
Botte renforcée ET4x, convient pour : ET40 / ET45 de 8 pouces
€103.93
€103.93
(syet4dclip – SG-ET4X-DCLIPS-01)
€30.46
€30.46
(syet50strap – SG-ET5X-HNDSTP-01)
€24.02
€24.02
(syet5xsstrap – SG-ET5X-SHDRSTP-01)
€54.05
€54.05
(stageit-l – Stageit-l)
Contact us and book our Staging Premium Service
€60.00
€60.00
(stageit-m – Stageit-m)
Contact us and book our Staging Premium Service
€30.00
€30.00
(stageit-s – Stageit-s)
Contact us and book our Staging Premium Service
€10.00
€10.00
(stageit-xl – Stageit-xl)
Contact us and book our Staging Premium Service
€240.00
€240.00
(syet4stand – STND-ET4X-10POS1-01)
€476.66
€476.66
(syaeet4x-35 – Z1AE-ET4XXX-3500)
€310.92
€310.92
(syaeet4x-3c – Z1AE-ET4XXX-3C00)
€196.74
€196.74
Fiche technique & plus
* La réduction s'applique au prix de vente initial.