Pasar al contenido principal
Zebra ET51/ET56

Reliable, long-lasting tablets for every work environment

desde

€1,227.90

(precio de venta recomendado)
  • Robust enterprise tablets for office and field staff
  • Available with a 8.4'' or 10.1'' multi-touch display with Gorilla Glass
  • Intel quad-core processor and 4 GB RAM
  • Reliable connectivity: WLAN, GPS, Bluetooth, LTE (ET56)
  • Operating system: Android
1397

Description

The Zebra ET51/ET56 tablets combine the chic appearance of a consumer device with the necessary reliability of an enterprise tablet, and bridge the gap between the short-lived end consumer segment and the highly durable tablet area in the high price segment. With numerous expansion options, the elegant enterprise tablets cover a large working environment – perfect for use in the fields of transportation and logistics, field service not to mention in retail stores.

Both the compact 8.4'' and the 10.1'' display are readable in nearly any lighting conditions and also seamlessly react when wet or when the user is wearing gloves. The impact-resistant, scratch-proof Corning Gorilla Glass protects the tablets’ most sensitive components. The ET51/ET56 is IP65-certified against dust and jet water. Plus, it withstands impacts and shocks, making it practical for usage in a vehicle (from a forklift in the warehouse up to delivery trucks on the road).

For good native wireless communication the tablets convince with reliable wireless support (802.11ac/r/k/v), GPS and Bluetooth 4.2. For use in the field the ET56 offers full WWAN connectivity with a high data rate in the LTE standard. The rapid Apollo Lake quad-core processor with 1.6 GHz and 4 GB of DDR4 RAM thereby processes large amounts of data at a high speed. Another advantage: the processor minimises energy consumption and increases the life cycle of the battery.

On the rear of the tablets there is a practical 8 megapixel colour camera. Via the 2 megapixel front camera it is possible to video conference via WLAN or mobile networks. This way, users are ensured immediate help and support from external experts, colleagues or bosses. With the expansion module with a scan engine, they capture nearly every 1D or 2D barcode, no matter what condition it is in - damaged, dirty or poorly printed.

The tablets are also optionally available with Android. In these versions, they feature a higher resolution, a 13 megapixel colour camera on the back and a built-in 5 megapixel front camera. A Qualcomm Snapdragon 660 Octa-core processor with 2.2 GHz and 32 GB of flash memory process large amounts of data at high speed, while the powerful 6,440 mAh lithium polymer battery ensures long operating times. The interfaces include Bluetooth 5.0, WLAN (802.11 ac) and a USB-C interface. The 10.1" version also offers 2x2 MIMO, 4G LTE, as well as GPS, GLONASS, Galileo and Beidou support. The 8" version, on the other hand, is available with an integrated barcode scanner, as needed. Thanks to PRZM technology, it even captures damaged or dirty 1D/2D barcodes reliably and quickly.

As needed, the Android version is also available as an 8'' variant with an integrated barcode scanner. Thanks to PRZM technology, it even captures damaged or dirty 1D/2D barcodes reliably and quickly.

With the versatile accessories they expand not only the tablet itself, but also the application areas of the ET51/ET56. The Android versions are also supported by Zebra Mobility DNA.

Accesorios

Accessory Category
Main image file
PWR-BGA12V50W0WW.png
Fuente de alimentación Zebra

(synt1250w – PWR-BGA12V50W0WW)

Fuente de alimentación, 12 VCC, 4,16 A, conector: 4 pines, pedir por separado: cable de CC, cable de alimentación (C13)

€58.85

€58.85

En stock 1074
1 mes de garantía
Main image file
PWR-WUA5V12W0EU.jpg
Fuente de alimentación Zebra, UE

(sytc51ps – PWR-WUA5V12W0EU)

Fuente de alimentación, 5 VDC, 2.5 A, incl.: enchufe (EU), pedir por separado: cable de conexión (USB-A)

€32.58

€32.58

En stock 1560
12 meses de garantía
Mobilis shoulder strap

(mobsstrap – 001027)

Safety carry shoulder strap

€17.49

€17.49

En stock 64
24 meses de garantía
Mobilis D-Rings

(mob001089 – 001089)

Universal Hypalon D-Rings, 4 peaces

€9.95

€9.95

En stock 45
12 meses de garantía
Mobilis screen protector, IK06, ET5X (10.1'')

(mob036174 – 036174)

Screen protector, Anti-Shock IK06, Hardness: 5H, Clear, Easy set up (bubble free), fits for: ET5X (10.1'')

€31.66

Artículo especial: no es posible cancelar ni devolverlo.

¡Este artículo será retirado del catálogo! ¡Asegura ahora las últimas existencias!

€31.66

En stock 18
24 meses de garantía
Mobilis protective case

(mob067005 – 067005)

Protective case, incl.: kick stand, hand strap (rotating), fits for: ET51/56 (10.1'')

€51.66

€51.66

En stock 2
24 meses de garantía
Brodit Charging Module, USB

(brd216230 – 216230)

Charging Module with USB-A Host and DC connector 5,5x5,1-1,5mm for Module Upgrade holders, no cables included, fits for: ET50, ET51, ET55, ET56

€159.66

Artículo especial: no es posible cancelar ni devolverlo.

€159.66

En stock 0
12 meses de garantía
Brodit voltage converter

(brd216240 – 216240)

Voltage converter, 48 VAC, 12 VDC, fits for: ET5X

€138.65

Artículo especial: no es posible cancelar ni devolverlo.

€138.65

En stock 0
12 meses de garantía
Brodit extension plate

(brd216250 – 216250)

Extension plate, fit for: Zebra ET5X 8.4'' Module Upgrade

€16.80

Artículo especial: no es posible cancelar ni devolverlo.

€16.80

En stock 0
12 meses de garantía
Brodit extension plate

(brd216251 – 216251)

Extension plate, fit for: Zebra ET5X 10.1'' Module Upgrade

€16.80

Artículo especial: no es posible cancelar ni devolverlo.

€16.80

En stock 0
12 meses de garantía
Brodit USB-Hub for ET5x

(brd216258 – 216258)

USB-Hub for ET5x, 3x USB-A, 1x Ethernet, fits for: Module upgrade cradles

€84.03

Artículo especial: no es posible cancelar ni devolverlo.

€84.03

En stock 0
12 meses de garantía
Main image file
25-124330-01R.jpg
Cable Micro USB Zebra

(symc9500cabu – 25-124330-01R)

Cable Micro USB, ActiveSync, longitud: 1.22m, apto para: bases de carga/transmisión Zebra

€12.02

€12.02

En stock 185
3 meses de garantía
Main image file
50-16000-671R.png
Zebra power cord, C13, IT

(syacabit – 50-16000-671R)

Power cord, C13, Italy, length: 1.8 m, colour: black

€18.03

€18.03

En stock 87
1 mes de garantía
Brodit charging station (MOLEX), ET5X (10'') (protective case)

(brd510892 – 510892)

Charging station (MOLEX), fits for: ET5X (10'') (protective case)

€302.51

Artículo especial: no es posible cancelar ni devolverlo.

€302.51

En stock 0
12 meses de garantía
Main image file
58-40000-007R.jpg
Correa para el hombro de Zebra

(systrap – 58-40000-007R)

Correa para el hombro, apto para: funda

€17.14

€17.14

En stock 2599
3 meses de garantía
Zebra ET5x charging cradle

(brd736267 – 736267)

ET5x charging cradle, 2 keys, for robust frame, with/without Exp. Modules. USB-A Host+DC5,5x5,1-1,5mm (no cable included).

€327.72

Artículo especial: no es posible cancelar ni devolverlo.

€327.72

En stock 2
12 meses de garantía
Zebra ET5x 10.1 Module Upgrade

(brd739266 – 739266)

Zebra ET5x Passiv Mount lockable, 10.1 Module Upgrade, 2 keys included, for robust frame, with/without expansion module/handstrap. AMPS+VESA 75 holes. Module Upgrade Cradle.

€176.46

Artículo especial: no es posible cancelar ni devolverlo.

€176.46

En stock 0
12 meses de garantía
Zebra ET5x Passiv Mount

(brd739267 – 739267)

Zebra ET5x Passiv Mount, 8.4 Module Upgrade, 2 keys included, for robust frame, with/without expansion module/handstrap. AMPS+VESA 75 holes. Module Upgrade Cradle.

€176.46

Artículo especial: no es posible cancelar ni devolverlo.

€176.46

En stock 8
12 meses de garantía
Brodit Holder for Zebra ET5X

(brd741266 – 741266)

Brodit bracket with lock, compatible with Rugged Frame and with/without Expansion Module/Handstrap, with MPS, VESA 75, for Zebra 10'' ET50, ET51, ET55, ET56

€168.06

Artículo especial: no es posible cancelar ni devolverlo.

€168.06

En stock 0
12 meses de garantía
Brodit Active Mount

(brd747267 – 747267)

Active Mount, for devices with Rugged Frame, with or without expansion module / handstrap, order separately: power supply, USB-A Host, Upgrade Module, fits for: ET5x (8'')

€310.92

Artículo especial: no es posible cancelar ni devolverlo.

€310.92

En stock 0
12 meses de garantía
Main image file
BRKT-SCRD-SMRK-01.png
Soporte de pared Zebra

(sytc8000mount – BRKT-SCRD-SMRK-01)

Soporte de pared, apto para: estaciones de carga, estaciones de carga/comunicación de 5 ranuras

€185.36

€185.36

En stock 34
1 mes de garantía
Zebra spare battery

(syet5xbat10-3 – BTRY-ET5X-10IN3-02)

Spare battery, 4950 mAh, internal battery, fits for: ET51/ET56 (10 inch, Windows)

€117.16

€117.16

En stock 24
Sin garantía
Zebra spare battery

(syet51exbat – BTRY-ET5X-10IN5-01)

Spare battery, extended, 9660 mAh, fits for: ET51/ET56 (10'' Android)

€152.56

€152.56

En stock 89
12 meses de garantía
Zebra spare battery, 6440 mAh

(syet5xbatp8 – BTRY-ET5X-8IN5-01)

Spare battery, 6440 mAh, fits for: ET51/ET56 (8'', Android)

€134.54

€134.54

En stock 1
Sin garantía
Zebra PowerPack

(syet50bat2 – BTRY-ET5X-PRPK2-01)

PowerPack battery, order separately: expansion module, fits for: ET5X, ET4X

€258.27

€258.27

En stock 227
3 meses de garantía
Zebra connection cable, RS-232

(sycabr71 – CBA-R71-C09ZAR)

Connection cable, RS-232, length: 2.7 m, coiled, power on PIN 9, TxD on PIN 2

€84.04

€84.04

En stock 95
1 mes de garantía
Zebra connection cable, RS-232, freezer

(sycabrf2 – CBA-RF2-C09ZAR)

Connection cable, RS-232, freezer, length: 2.7 m, coiled, power on PIN 9, TxD on PIN 2

€64.66

€64.66

En stock 56
1 mes de garantía
Zebra connection cable, USB

(sycabu09 – CBA-U09-C15ZAR)

Connection cable, USB, length: 4.5 m, coiled, cable code: U09

€96.98

€96.98

En stock 194
1 mes de garantía
Zebra connection cable, USB

(sycabu12 – CBA-U12-C09ZAR)

Connection cable, USB, length: 2.7 m, coiled, cable code: U12

€34.47

€34.47

En stock 164
1 mes de garantía
Zebra connection cable, USB, freezer

(sycabuf6 – CBA-UF6-C12ZAR)

Connection cable, USB, shielded, freezer, length: 3.65 m, coiled

€96.98

€96.98

En stock 133
1 mes de garantía
Main image file
CBL-DC-381A1-01.png
Cable de CC Zebra

(sydc-8 – CBL-DC-381A1-01)

Cable de CC, conector (fuente de alimentación: 8 pines / estación 4 pines), apto para: estación multiancho

€31.24

€31.24

En stock 1234
1 mes de garantía
Cable de CC Zebra

(sydc-7 – CBL-DC-382A1-01)

Cable de CC, conector (fuente de alimentación: 8 pines / estación 4 pines), pestillo de liberación extendido, apto para: estación multislot

€31.24

€31.24

En stock 260
1 mes de garantía
Main image file
CBL-DC-388A1-01.jpg
Cable de CC Zebra

(synt1250cab – CBL-DC-388A1-01)

Cable de CC, conector (fuente de alimentación: 4 pines / estación: 1 pin), apto para: estación de 1 ranura, estación de batería de 4 ranuras

€10.80

€10.80

En stock 2190
1 mes de garantía
Zebra adaptor plug, EU

(syadapt-eu – CN-000803-05)

Adaptor clip for power supply, EU

€10.46

€10.46

En stock 0
Sin garantía
Zebra adapter, UK

(syadapt-uk – CN-000803-06)

Adapter clip for power supply, UK

€10.46

€10.46

En stock 0
Sin garantía
Zebra charging station

(syet5xslot – CRD-ET5X-1SCG2)

Charging station, order separately: power supply, DC cable, power cord, fits for: ET5X

€243.26

€243.26

En stock 39
12 meses de garantía
Zebra charging station, 4 slots

(syet5xcha-2 – CRD-ET5X-SE4CO3-01)

Charging station, 4 slots, order separately: power supply, DC cable, power cord, fits for: ET5X

€801.58

€801.58

En stock 0
12 meses de garantía
Android Zero Touch Registration License por Jarltech

(jtbindszt – jtbindszt)

Licencia de registro Android Zero Touch para un dispositivo

€9.42

€9.42

Disponible
Sin garantía
Fuente de alimentación Zebra, kit

(synt1250wkit – KIT-PWR-12V50W)

Fuente de alimentación (PWR-BGA12V50W0WW), 12 VCC, 4,16 A, conector: 4 pines, incl.: cable de CC (CBL-DC-388A1-01) (fuente de alimentación: 4 pines, estación 1 pin), pedir por separado: cable de alimentación (C13)

€69.68

€69.68

En stock 1070
12 meses de garantía
Zebra connection cable, USB

(ettqln320ucab – P1031365-055)

Connection cable, USB (A/mini), strain relief, fits for: ZQ600, QLn220, QLn320, QLn420

€28.93

€28.93

En stock 32
1 mes de garantía
Zebra power supply

(ettzq51dc – P1063406-030)

Power supply, DC-DC, open ended cable, 12-24V, fits for: vehicle dock, ZQ500, ZQ600, QLn220, QLn320, QLn420

€52.63

€52.63

En stock 68
1 mes de garantía
Zebra power supply

(ettzq51dc2 – P1063406-031)

Power supply, DC-DC, with cigarette lighter adapter, 12-24V, fits for: ZQ500, ZQ600, QLn220, QLn320, QLn420, vehicle dock

€52.63

€52.63

En stock 0
1 mes de garantía
Main image file
PWR-BGA12V108W0WW.png
Fuente de alimentación Zebra

(synt12108w – PWR-BGA12V108W0WW)

Fuente de alimentación, 12 VCC, 9 A, conector: 8 pines, pedir por separado: cable CC, cable de alimentación (C13)

€126.13

€126.13

En stock 1652
12 meses de garantía
Main image file
PWR-WUA5V12W0GB.jpg
Zebra power supply, UK

(sytc51ps-uk – PWR-WUA5V12W0GB)

Power supply, 5 VDC, 2.5 A, incl.: plug (UK), order separately: connection cable (USB-A), fits for: MC22, MC27

€32.58

€32.58

En stock 205
Sin garantía
Zebra power supply, USB

(sypsaw – PWR-WUA5V6W0WW)

Power supply, USB A, Input: 100-240 V, 0.2 A, Output: 5.2 V, 1.2 A, incl.: Adapter clips (EU, UK, US, AU), order separately: connection cable (USB)

€20.44

€20.44

En stock 15
1 mes de garantía
Main image file
Art_25284.jpg
RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (8")

(ramholder74 – RAM-HOL-ZE10CLU)

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with rugged boot.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10CLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10CLU holder is supplied.

€160.46

€160.46

En stock 0
36 meses de garantía
Main image file
Art_25285.jpg
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (8")

(ramholder76 – RAM-HOL-ZE10KLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10KLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with keys
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10KLU holder is supplied.

€190.71

€190.71

En stock 0
36 meses de garantía
Main image file
Art_25286.jpg
RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (8")

(ramholder53 – RAM-HOL-ZE10PCLU)

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PCLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Input Connector: 5.5 mm DC
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PCLU holder is supplied.

€232.73

€232.73

En stock 0
36 meses de garantía
Main image file
RAM-HOL-ZE10PD2CLU
RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (8")

(ramholder22 – RAM-HOL-ZE10PD2CLU)

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PD2CLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PD2CLU holder is supplied.

€287.35

€287.35

En stock 2
36 meses de garantía
Main image file
Art_25288.jpg
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (8")

(ramholder102 – RAM-HOL-ZE10PD2KLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PD2KLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with key
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PD2KLU holder is supplied.

€308.36

€308.36

En stock 0
36 meses de garantía
Main image file
RAM-HOL-ZE10PD2U
RAM Mounts Form-Fit Holder for Zebra ET51/56 (8")

(ramholder23 – RAM-HOL-ZE10PD2U)

This RAM Mounts holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PD2U:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PD2U holder is supplied.

€247.86

€247.86

En stock 0
36 meses de garantía
Main image file
Art_25290.jpg
RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (8")

(ramholder85 – RAM-HOL-ZE10PDCLU)

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PDCLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Input Connector: 5.5 mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PDCLU holder is supplied.

€266.34

€266.34

En stock 0
36 meses de garantía
Main image file
Art_25291.jpg
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (8")

(ramholder77 – RAM-HOL-ZE10PDKLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PDKLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with key
Input Connector: 5.5 mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PDKLU holder is supplied.

€283.99

€283.99

En stock 0
36 meses de garantía
Main image file
Art_25292.jpg
RAM Mounts Form-Fit Holder (Latch) for Zebra ET51/56 (8")

(ramholder62 – RAM-HOL-ZE10PDU)

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with rugged case.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PDU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
With Latch
Prepared for mounting additional devices such as handhelds
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PDU holder is supplied.

€231.89

€231.89

En stock 0
36 meses de garantía
Main image file
Art_25293.jpg
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (8")

(ramholder58 – RAM-HOL-ZE10PKLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PKLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with key
Input Connector: 5.5mm DC
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PKLU holder is supplied.

€253.74

€253.74

En stock 0
36 meses de garantía
Main image file
RAM-HOL-ZE10PU
RAM Mounts Form-Fit Holder (Latch) for Zebra ET51/56 (8")

(ramholder4 – RAM-HOL-ZE10PU)

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Case.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10PU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
With Latch
Prepared for mounting additional devices such as handhelds
Input Connector: 5.5mm DC
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10PU holder is supplied.

€196.60

€196.60

En stock 1
36 meses de garantía
Main image file
Art_25295.jpg
RAM Mounts Form-Fit Holder (Latch) for Zebra ET51/56 (8")

(ramholder109 – RAM-HOL-ZE10U)

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with rugged boot.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE10U:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
With Latch
Additional mounting plate for attaching additional devices or accessories
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE10U holder is supplied.

€125.17

€125.17

En stock 0
36 meses de garantía
Main image file
Art_25296.jpg
RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (10")

(ramholder86 – RAM-HOL-ZE11CLU)

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 10.1“ Series with rugged boot.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11CLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11CLU holder is supplied.

€162.98

€162.98

En stock 0
36 meses de garantía
Main image file
Art_25297.jpg
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (10")

(ramholder78 – RAM-HOL-ZE11KLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 10.1“ Series with rugged boot.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11KLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with keys
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11KLU holder is supplied.

€197.44

€197.44

En stock 0
36 meses de garantía
Main image file
Art_25298.jpg
RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (10")

(ramholder34 – RAM-HOL-ZE11PCLU)

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PCLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Input Connector: 5.5mm DC
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PCLU holder is supplied.

€253.74

€253.74

En stock 0
36 meses de garantía
Main image file
RAM-HOL-ZE11PD2CLU
RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (10")

(ramholder24 – RAM-HOL-ZE11PD2CLU)

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PD2CLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PD2CLU holder is supplied.

€305.00

€305.00

En stock 0
36 meses de garantía
Main image file
RAM-HOL-ZE11PD2KLU
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (10")

(ramholder6 – RAM-HOL-ZE11PD2KLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PD2KLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with key
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PD2KLU holder is supplied.

€326.01

€326.01

En stock 0
36 meses de garantía
Main image file
RAM-HOL-ZE11PD2U
RAM Mounts Form-Fit Holder for Zebra ET51/56 (10")

(ramholder5 – RAM-HOL-ZE11PD2U)

This RAM Mounts holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PD2U:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PD2U holder is supplied.

€266.34

€266.34

En stock 0
36 meses de garantía
Main image file
Art_25302.jpg
RAM Mounts Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (10")

(ramholder35 – RAM-HOL-ZE11PDCLU)

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PDCLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with combo-locking
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PDCLU holder is supplied.

€280.63

€280.63

En stock 0
36 meses de garantía
Main image file
RAM-HOL-ZE11PDKLU
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (10")

(ramholder3 – RAM-HOL-ZE11PDKLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PDKLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with key
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PDKLU holder is supplied.

€305.84

€305.84

En stock 0
36 meses de garantía
Main image file
Art_25191.jpg
RAM Mounts Form-Fit Holder for Zebra ET51/56 (10")

(ramholder112 – RAM-HOL-ZE11PDU)

This RAM Mounts holder is suitable for Zebra ET5x 10.1“ Series with rugged boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PDU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Input Connector: 5.5mm DC-Connector
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PDU holder is supplied.

€248.70

€248.70

En stock 0
36 meses de garantía
Main image file
Art_25304.jpg
RAM Mounts Form-Fit Holder (Key-Locking) for Zebra ET51/56 (10")

(ramholder49 – RAM-HOL-ZE11PKLU)

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PKLU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
Prepared for mounting additional devices such as handhelds
Lockable with key
Input Connector: 5.5mm DC
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PKLU holder is supplied.

€268.03

€268.03

En stock 0
36 meses de garantía
Main image file
RAM-HOL-ZE11PU
RAM Mounts Form-Fit Holder (Latch) for Zebra ET51/56 (10")

(ramholder25 – RAM-HOL-ZE11PU)

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET5x 10.1“ with rugged boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11PU:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
With Latch
Prepared for mounting additional devices such as handhelds
Input Connector: 5.5mm DC-Connector
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11PU holder is supplied.

€208.36

€208.36

En stock 0
36 meses de garantía
Main image file
RAM-HOL-ZE11U
RAM Mounts Form-Fit Holder (Latch) for Zebra ET51/56 (10")

(ramholze11 – RAM-HOL-ZE11U)

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET5x 10.1“.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE11U:
Compatible with the Zebra tablet accessoires
Easy insertion and removal
With Latch
Prepared for mounting additional devices such as handhelds
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE11U holder is supplied.

€141.13

€141.13

En stock 0
36 meses de garantía
Main image file
RAM-HOL-ZE21PD2U
RAM Mounts EZ-Roll'r Holder for Zebra ET40/45 (10")

(ramet4t-2 – RAM-HOL-ZE21PD2U)

This RAM Mounts EZ-Roll‘r holder is suitable for Zebra ET40 & ET45 10“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-HOL-ZE21PD2U:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional informations:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE21U.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCK-ZE21PD2U.

Devices shown are not included in the delivery.
Only the RAM-HOL-ZE21PD2U holder is supplied.

€248.70

€248.70

En stock 0
36 meses de garantía
Zebra PowerPack battery charging station, 4 slots

(syet5chg4 – SAC-ET5X-4PPK1-01)

PowerPack battery charging station, 4 slots, order separately: power supply, DC cable, power cord, fits for: ET5X, ET4X & ET8X PowerPack

€162.17

€162.17

En stock 0
1 mes de garantía
Zebra ET5x Rugged Frame

(syet5xframio – SG-ET5X-10RCSE4-01)

ET5x Rugged Frame with I/O connector, for 10'' tablets, compatible with extended batteries and Handle/Shoulder Straps

€223.33

€223.33

En stock 0
Sin garantía
Zebra rugged frame, 8''

(syet5xhols – SG-ET5X-8RCSE2-02)

Rugged Frame, incl.: rugged I/O connector, fits for: ET5X (8'')

€216.24

€216.24

En stock 33
36 meses de garantía
Zebra handle strap

(syet50strap – SG-ET5X-HNDSTP-01)

Handle strap, order separately: rugged frame, D-Clips, fits for: ET5X

€24.02

€24.02

En stock 449
3 meses de garantía
Zebra shoulder strap

(syet5xsstrap – SG-ET5X-SHDRSTP-01)

Zebra shoulder strap, fits for: ET5X

€54.05

€54.05

En stock 257
3 meses de garantía
Zebra stylus, paquete de 3

(sytc70stylus – SG-TC7X-STYLUS-03)

Lápiz óptico, incl.: cordón enrollado, paquete de 3, para: TC51, TC56, TC7X, TC8000, MC3300, ET51/56 (Android), ET50/55 (Android), MC9300.

€54.05

€54.05

En stock 235
12 meses de garantía
Zebra Service, ET5x

(syaeet5xxx-3c – Z1AE-ET5XXX-3C00)

3 Year Zebra OneCare Essential. Includes Comprehensive Coverage.

€524.25

€524.25

Disponible
Sin garantía
Zebra Service, OneCare Essential, 5 Years

(syaeet5xxx-5c – Z1AE-ET5XXX-5C00)

Zebra OneCare Essential, with Comprehensive Coverage, 5 Years, fits for: ET5X

€825.51

€825.51

Disponible
Sin garantía
Main image file
Z1B5-EMH250-5000.jpg
Soporte técnico de Zebra, soporte de software, 5 años

(syb5emh250-50 – Z1B5-EMH250-5000)

Soporte técnico y de software (TSS) de Zebra OneCare, plazo: 5 años, incluye: soporte telefónico, mantenimiento de software, precio por dispositivo

€160.91

€160.91

Disponible
Sin garantía
Zebra service

(ettocereet5-2c – Z1RE-ET5XXX-2C00)

OneCare Essential, 2 Jahre, renewal, ET5XXX

€351.07

€351.07

Disponible
Sin garantía
Zebra expansion module, 2D, Android, 10''

(syet5x10scn7-02 – ZBK-ET5X-10SCN7-02)

Expansion module, SE4770 barcode scanner (1D, 2D), range: 1.6 inch to 36.3 inch, rotating hand strap, fits for: ET51/ET56 (Android, 10'')

€860.32

¡Este artículo será retirado del catálogo! ¡Asegura ahora las últimas existencias!

€860.32

En stock 15
3 meses de garantía

Hoja de datos y más

Las ofertas y los plazos de entrega indicados no son vinculantes y solo son válidos para revendedores. Los precios están en EUR, sin IVA y sujetos a cambios. Salvo errores.

* The discount refers to the original sales price.

Cerrar menú – ¡Pregúntame cualquier cosa!

Abre el diálogo de chat, inicia una nueva conversación y selecciona CEO en Departamento.