€844.05
(precio de venta recomendado)- Business tablets with an integrated enterprise scanner
- Capacitive 8" or 10" multi-touch display with Corning Gorilla Glass
- IP65- and MIL-STD-810H-certified, suited for office service and field service
- Wi-Fi 6, 5G, Bluetooth 5.1 (BLE), NFC and GPS (ET45 only)
- Supports the tools of »Mobility DNA«
Description
Description
(synt1250w – PWR-BGA12V50W0WW)
€58.85
€58.85
(mobsstrap – 001027)
€17.49
€17.49
(mob001089 – 001089)
Universal Hypalon D-Rings, 4 peaces
€9.95
€9.95
(mob020013 – 020013)
Connection cable, USB-A to USB-C, length: 1m, 10W
€9.16
€9.16
(mob036276 – 036276)
€33.33
¡Este artículo será retirado del catálogo! ¡Asegura ahora las últimas existencias!
€33.33
(mob063022 – 063022)
Protective Case, incl.: rotating tripod and handle, fits for: ET40, ET45 (8")
€79.16
€79.16
(mob063023 – 063023)
Protective Case, reinforced, Rotating Handle Tripod, fits for: ET40, ET45 (10")
€79.16
€79.16
(mob065026 – 065026)
Case PROTECH, fits for: ET40, ET45 (8" devices)
€39.16
€39.16
(mob065027 – 065027)
Case PROTECH, fits for: ET40, ET45 (10" devices)
€44.16
€44.16
(brd216312 – 216312)
€54.61
€54.61
(brd216313 – 216313)
€46.21
€46.21
(brd216316 – 216316)
€54.61
€54.61
(brd216317 – 216317)
€46.21
€46.21
(brd216331 – 216331)
€117.64
€117.64
(brd216376 – 216376)
Active Holder, for devices without rugged boot, AMPS, VESA75, order separately: power supply, fits for: ET40, ET45 (8")
€126.04
€126.04
(brd216377 – 216377)
Active Holder, for devices without rugged boot, AMPS, VESA75, order separately: power supply, USB-Host, fits for: ET40, ET45 (8")
€176.46
€176.46
(brd216378 – 216378)
Active Holder, for devices with rugged boot, AMPS, VESA75, order separately: power supply, fits for: ET40, ET45 (8")
€126.04
€126.04
(brd216379 – 216379)
Active Holder, for devices with rugged boot, AMPS, VESA75, order separately: power supply, USB-Host, fits for: ET40, ET45 (8")
€176.46
€176.46
(brd216380 – 216380)
Active Holder, for devices with rugged boot and Zebra expansion back, order separately: power supply, fits for: ET40, ET45 (8")
€159.66
€159.66
(brd216381 – 216381)
Active Holder, for devices with rugged boot and Zebra expansion back, order separately: power supply, USB-Host, fits for: ET40, ET45 (8")
€210.08
€210.08
(brd216382 – 216382)
Active Holder, for devices without rugged boot, AMPS, VESA 75, order separately: power supply, fits for: ET40, ET45 (10")
€126.04
€126.04
(brd216383 – 216383)
Active Holder, for devices without rugged boot, USB-Host, AMPS, VESA 75, order separately: power supply, fits for: ET40, ET45 (10")
€176.46
€176.46
(brd216385 – 216385)
Active Holder, requires: rugged boot, AMPS, VESA 75x75, order separately: power supply, fits for: ET40, ET45 (10")
€176.46
€176.46
(brd216386 – 216386)
Active Holder, fits devices with rugged boot and expansion back, fits for: ET40, ET45 (10")
€159.66
€159.66
(brd243570 – 243570)
Mounting Kit, incl.: Table clamp, 2 x Mounting arm, passive mount for 10" ET4x
€159.66
€159.66
(ett3ptygj-5 – 3PTY-GJ-7160-1807-00)
Gamber Johnson vehicle charging-/communication station, interfaces: 2x USB-A, drilling: VESA 75 and AMPS, order separately: vehicle adapter, vehicle mounting, fits for: ET40/45 (10" with rugged boot)
€363.09
€363.09
(ett3ptygj-20 – 3PTY-GJ-7300-0467)
Forklift power supply, 20-60VDC, fits for: Gamber Johnson Cradles
€317.59
€317.59
(syet4scrprot – 3PTY-INF-ZEB-ET4X10)
Zebra InfoCase Screen protector, tempered glass, fits for: ET4X (10 inch)
€35.49
€35.49
(syproclipcrd-8 – 3PTY-PCLIP-216384)
ProClip Charge Only Vehicle Cradle, VESA 75, AMPS, order separately: protective boot and power supply, fits for: ET4X (10")
€163.80
€163.80
(systrap – 58-40000-007R)
€17.14
€17.14
(brd710320 – 710320)
€84.03
€84.03
(brd712320 – 712320)
€176.46
€176.46
(brd712330 – 712330)
€210.08
€210.08
(brd712332 – 712332)
€210.08
€210.08
(brd713326 – 713326)
€243.69
€243.69
(brd713330 – 713330)
€218.48
€218.48
(brd713332 – 713332)
€226.88
€226.88
(brd736324 – 736324)
Active Holder, for fixed installation, fits devices with Rugged Boot or exoskeleton, AMPS and VESA75, key-lock, USB-Host, fits for: ET40, ET45
€285.71
€285.71
(brd736326 – 736326)
Active Holder, fixed installation, requires rugged boot, VESA 75, AMPS, 12V DC, USB Host, lockable, includes two keys, fits for: ET40, ET45 (10")
€294.11
€294.11
(brd736333 – 736333)
Active Holder with lock, for fixed installation, for devices with rugged boot, compatible with expansion back, fits for: ET40, ET45 (10")
€327.72
€327.72
(brd739317 – 739317)
€126.04
€126.04
(brd739318 – 739318)
€126.04
€126.04
(brd739320 – 739320)
€134.45
€134.45
(brd739332 – 739332)
Passive Holder, Lockable, requires protective boot, incl. two keys, AMPS, VESA 75, fits for: ET4x (10")
€168.06
€168.06
(brd747333 – 747333)
Active Holder, fixed installation, spring-lock, requires rugged boot, fits for: ET40, ET45 (10")
€319.32
€319.32
(syet4xtada – ADP-ET4X-10T4S1-04)
T adapter, pack of 4, for 10'' tablets, fits for: multi slot cradles
€57.34
€57.34
(syet4xtada8 – ADP-ET4X-8T4S1-04)
€57.34
€57.34
(syet4xmbrack – BRKT-ET4X-DSKPS-01)
€16.52
€16.52
(syet4xbat – BTRY-ET4X-10IN1-01)
€144.82
€144.82
(syet4xbat8 – BTRY-ET4X-8IN1-01)
€125.38
€125.38
(syet50bat2 – BTRY-ET5X-PRPK2-01)
PowerPack battery, order separately: expansion module, fits for: ET5X, ET4X
€258.27
€258.27
(syet4dcl – CBL-DC-388A2-01)
€12.29
€12.29
(syet41crd – CRD-ET4X-1SCG1-01)
ET4X 1-Slot Charging Cradle, no data transfer, order separately: Power Supply, DC-Cable and AC-Cable, fits for: ET40, ET45, ET401
€272.30
€272.30
(syet41ccrd-5 – CRD-ET4X-1SNWS-02)
Workstation Connect Cradle, 1x HDMI, 1x Ethernet, 4x USB Type A, 3.5mm Headset Jack, requires MDNA Enterprise license on device to support Zebra Workstation Connect Software features, order separately: Power Supply, AC and DC cable, fits for: ET4X
€578.33
€578.33
(syet44chgcrd – CRD-ET4X-4S10I1-01)
ET4X 4-Slot Charging Cradle, no data transfer, order separately: Power Supply, DC-Cable and AC-Cable, fits for: 10'' ET40 / ET45, 10'' ET40HC / ET45HC / ET401
€808.82
€808.82
(syet44chgcrd2 – CRD-ET4X-4S8I1-01)
ET4X 4-Slot Charging Cradle, no data transfer, order separately: Power Supply, DC-Cable and AC-Cable, fits for: 8'' ET40, ET45, ET401
€808.82
€808.82
(syet4xcrdcup – CRDCUP-4S-ET5TOET4)
ET4X Four Slot Cradle Convertion Cup Kit for change from ET5X ShareCradle, includes one cup, order separately: T-adapter
€102.17
€102.17
(jtbindszt – jtbindszt)
€9.42
€9.42
(sytc7xtether – KT-TC7X-TETHR1-03)
Set of three wrapped tethers for pen.
€36.04
€36.04
(syet4batcov – MISC-ET4X-BTDPS-01)
Battery Door with Presentation Stand, fits for: ET4x (10")
€73.71
€73.71
(syet4x – MISC-ET4X-PBTDS-01)
Zebra Battery Door Adapter for presentation stand in portrait orientation, fits for: ET4x 10"
€72.35
€72.35
(ramgdsdock-2 – RAM-GDS-DOCK-ZE20PD2U)
This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCK-ZE20PD2U:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-ZE20PD2U holder is supplied.
€291.55
€291.55
(ramgdsdock-3 – RAM-GDS-DOCK-ZE20PDU)
This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCK-ZE20PDU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-ZE20PDU holder is supplied.
€276.43
€276.43
(ramgdsdock-28 – RAM-GDS-DOCK-ZE20PU)
This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCK-ZE20PU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Input Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-ZE20PU holder is supplied.
€190.71
€190.71
(ramgdsdock-4 – RAM-GDS-DOCK-ZE21PD2U)
This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCK-ZE21PD2U:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-ZE21PD2U holder is supplied.
€290.71
€290.71
(ramholder106 – RAM-GDS-DOCK-ZE21PDU)
This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCK-ZE21PDU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-ZE21PDU holder is supplied.
€275.59
€275.59
(ramgdsdock-5 – RAM-GDS-DOCK-ZE21PU)
This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCK-ZE21PU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Input Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-ZE21PU holder is supplied.
€189.87
€189.87
(ramholder81 – RAM-GDS-DOCKL-ZE20PD2U)
This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCKL-ZE20PD2U:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Lockable with Keys
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-ZE20PD2U holder is supplied.
€350.38
€350.38
(ramholder110 – RAM-GDS-DOCKL-ZE20PDU)
This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCKL-ZE20PDU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Lockable with Keys
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-ZE20PDU holder is supplied.
€335.25
€335.25
(ramgdsdock-26 – RAM-GDS-DOCKL-ZE20PU)
This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCKL-ZE20PU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Lockable with Keys
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Input Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-ZE20PU holder is supplied.
€250.38
€250.38
(ramgdsdock-6 – RAM-GDS-DOCKL-ZE21PD2U)
This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCKL-ZE21PD2U:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Lockable with Keys
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-ZE21PD2U holder is supplied.
€359.62
€359.62
(ramholder96 – RAM-GDS-DOCKL-ZE21PDU)
This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCKL-ZE21PDU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Lockable with Keys
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-ZE21PDU holder is supplied.
€345.34
€345.34
(ramgdsdock-7 – RAM-GDS-DOCKL-ZE21PU)
This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCKL-ZE21PU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Lockable with Keys
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Input Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-ZE21PU holder is supplied.
€257.10
€257.10
(ramgdsdock-17 – RAM-GDS-DOCKNLL-ZE20PU)
This RAM Mounts GDS Form-Fit (Latch) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCKNLL-ZE20PU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
With Latch
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Input Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKNLL-ZE20PU holder is supplied.
€209.20
€209.20
(ramgdsdock-18 – RAM-GDS-DOCKNLL-ZE21PU)
This RAM Mounts GDS Form-Fit (Latch) holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-GDS-DOCKNLL-ZE21PU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
With Latch
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Input Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKNLL-ZE21PU holder is supplied.
€214.24
€214.24
(ramholder8 – RAM-HOL-ZE20PD2KLU)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET4x 8“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE20PD2KLU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Lockable with key
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20LU.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCKL-ZE20PD2U.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE20PD2KLU holder is supplied.
€302.48
€302.48
(ramholder7 – RAM-HOL-ZE20PD2U)
This RAM Mounts EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE20PD2U:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, FCC, WEEE, CE & UKCA
Additional informations:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20U.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCK-ZE20PD2U.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE20PD2U holder is supplied.
€239.45
€239.45
(ramholder79 – RAM-HOL-ZE20PDKLU)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET4x 8“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE20PDKLU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Lockable with key
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20LU.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCKL-ZE20PDU.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE20PDKLU holder is supplied.
€271.39
€271.39
(ramholder99 – RAM-HOL-ZE20PDU)
This RAM Mounts EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE20PDU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional informations:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20U.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCK-ZE20PDU.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE20PDU holder is supplied.
€204.16
€204.16
(ramholder83 – RAM-HOL-ZE20PKLU)
This RAM Mounts EZ-Roll‘r (key-locking) holder is suitable for Zebra ET4x 8“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE20PKLU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Lockable with key
Input Connector: 5.5mm DC
Input Cable Length: ca. 100 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20LU.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE20PKLU holder is supplied.
€270.55
€270.55
(ramholet4x-2 – RAM-HOL-ZE20PNLLU)
This RAM Mounts Form-Fit (latch) holder is suitable for Zebra ET4x 8“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE20PNLLU:
Compatible with PowerPack batterie
Easy insertion and removal
With Latch
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Input Connector: 5.5mm DC
Input Cable Length: ca. 100 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20LU.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCKNLL-ZE20PU.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE20PNLLU holder is supplied.
€212.56
€212.56
(ramholet4x – RAM-HOL-ZE20PU)
This RAM Mounts EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE20PU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Input Connector: 5.5mm DC
Input Cable Length: ca. 100 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20U.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE20PU holder is supplied.
€191.55
€191.55
(ramet4t – RAM-HOL-ZE21PD2KLU)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET4x 10“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE21PD2KLU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Lockable with key
Input Connector: 5.5mm DC
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE21LU.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCKL-ZE21PD2U.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE21PD2KLU holder is supplied.
€319.29
€319.29
(ramtdock – RAM-HOL-ZE21PDKLU)
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET4x 10“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE21PDKLU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Lockable with key
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE21LU.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCKL-ZE21PDU.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE21PDKLU holder is supplied.
€283.15
€283.15
(ramtdock-2 – RAM-HOL-ZE21PDU)
This RAM Mounts EZ-Roll‘r holder is suitable for Zebra ET40 & ET45 10“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE21PDU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Input Connector: 5.5mm DC
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional informations:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE21U.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCK-ZE21PDU.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE21PDU holder is supplied.
€211.72
€211.72
(ramholet4-2 – RAM-HOL-ZE21PKLU)
Este soporte RAM Mounts Form-Fit (con cierre de llave) es adecuado para la serie Zebra ET40, ET45 de 10” y ET401 (10”) con funda protectora (Rugged Boot).
El soporte se alimenta mediante una conexión DC de 5,5 mm y carga el dispositivo en la base.
Para insertar el dispositivo, coloque la parte inferior del dispositivo en el soporte y presione hasta que haga clic en su posición.
Los recortes en los botones y puertos le permiten seguir utilizándolos sin problemas.
El soporte también permite seguir utilizando la función de escaneo de la tablet gracias al recorte en la parte posterior.
Los accesorios de la tablet, como las baterías PowerPack, también se pueden guardar en el interior.
La parte posterior del soporte del dispositivo está preparada para soportar una base VESA de 75x75 mm o una base de bola redonda (no incluida).
Características del producto RAM Mounts RAM-HOL-ZE21PKLU:
Compatible con baterías PowerPack
Fácil inserción y extracción
Placa de montaje adicional para fijar dispositivos o accesorios adicionales
Solo para tablets Zebra con funda protectora (Rugged Boot)
Bloqueable con llave
Conector de entrada: DC de 5,5 mm
Longitud del cable de entrada: aprox. 100 cm
Certificaciones: RoHS, WEEE, CE y UKCA
Información adicional:
Para soporte de tablet sin la funda protectora (Rugged Frame), consulte RAP-INSERT-ZE21LU.
Esta base no es compatible con IntelliSkin.
Para IntelliSkin con GDS Tech, consulte RAM-GDS-DOCKL-ZE21PU.
Los dispositivos mostrados no están incluidos en la entrega.
Solo se suministra el soporte RAM-HOL-ZE21PKLU.
€265.50
€265.50
(ramholder114 – RAM-HOL-ZE21PNLLU)
This RAM Mounts Form-Fit (latch) holder is suitable for Zebra ET4x 10“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE21PNLLU:
Compatible with PowerPack batterie
Easy insertion and removal
With Latch
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Frame (Boot)
Input Connector: 5.5mm DC
Input Cable Length: ca. 100 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To support the tablet without the Rugged Boot, see RAP-INSERT-ZE21LU.
This dock is not compatible with IntelliSkin.
For IntelliSkin with GDS Tech, see RAM-GDS-DOCKNLL-ZE21PU.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE21PNLLU holder is supplied.
€223.49
€223.49
(ramholet4 – RAM-HOL-ZE21PU)
This RAM Mounts EZ-Roll‘r holder is suitable for Zebra ET40 & ET45 10“ series with Rugged Boot.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-ZE21PU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Only for Zebra Tablets within Rugged Boot
Input Connector: 5.5mm DC
Input Cable Length: ca. 100 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To support the tablet without the Rugged Frame, see RAP-INSERT-ZE21U.
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE21PU holder is supplied.
€198.28
€198.28
(syet5chg4 – SAC-ET5X-4PPK1-01)
PowerPack battery charging station, 4 slots, order separately: power supply, DC cable, power cord, fits for: ET5X, ET4X & ET8X PowerPack
€162.17
€162.17
(syet4boot – SG-ET4X-10EXOSKL1-01)
ET4x Rugged Boot, fits for: 10'' ET4x
€103.93
€103.93
(syet4boot2 – SG-ET4X-8EXOSKL1-01)
ET4x Rugged Boot, fits for: 8'' ET40 / ET45
€103.93
€103.93
(syet4dclip – SG-ET4X-DCLIPS-01)
ET4X D-Clips, for use of shoulder strap on Rugged Boot, fits for: ET4x
€30.46
€30.46
(syet50strap – SG-ET5X-HNDSTP-01)
€24.02
€24.02
(syet5xsstrap – SG-ET5X-SHDRSTP-01)
€54.05
€54.05
(stageit-l – Stageit-l)
Contact us and book our Staging Premium Service
€60.00
€60.00
(stageit-m – Stageit-m)
Contact us and book our Staging Premium Service
€30.00
€30.00
(stageit-s – Stageit-s)
Contact us and book our Staging Premium Service
€10.00
€10.00
(stageit-xl – Stageit-xl)
Contact us and book our Staging Premium Service
€240.00
€240.00
Hoja de datos y más
* The discount refers to the original sales price.