RAM Mounts Cradles

Mounting systems for every challenge

RAM Mounts Cradles

Mounting systems for every challenge

High-quality mounts for tablets and mobile computers
Custom-fit cradles for a wide range of devices from various manufacturers
Quick installation with a 3-component mounting system
GDS mounts with IntelliSkin technology
Flexible use: vehicles, motorbikes and bicycles, aviation, public service

46426

Description

RAM Mounts Cradles are custom-designed mounting systems for tablets and mobile computers from various manufacturers. Thanks to the 3-component mounting system, they are quickly and easily integrated into any work environment. Additionally, the innovative GDS mounts with IntelliSkin technology provide a universal solution for charging devices, regardless of the manufacturer or model. This enhances efficiency within a company, especially when different models of mobile devices or tablets are in use.

€250.38

In stock 0

36 months warranty

RAM Mounts IntellìSkin Next Gen Protective Sleeve for Zebra ET40 & ET45 (8“) - GDS-Technology - External USB-C Connector

(ramgds3 – RAM-GDS-SKIN-ZE20C-NG)

Topseller

This RAM Mounts GDS IntelliSkin Next Gen protective sleeve is designed for the Zebra ET40 & ET45 (8“) and offers reliable protection combined with convenient charging functionality. The integrated GDS connector is located within the inner frame of the case, allowing the device to be charged or continuously powered even while in use. An additional USB-C port at the bottom allows the device to be charged even without a dock. Thanks to its thoughtful design, all device functions remain fully accessible the camera and buttons can still be used without restriction. Additional cutouts and clearances on the back of the IntelliSkin ensure compatibility with standard and extended battery packs. The IntelliSkin Next Gen protective sleeve for the Zebra ET4x is compatible with a variety of GDS docks and accessories. Product features RAM Mounts RAM-GDS-SKIN-ZE20C-NG: Compatible with standard and extended battery packs and OEM hand strap Continued access to camera and buttons Charging and data sync function Easy insertion and removal Ports: External USB-C 2.0 Transfer Speed: USB 3.1 @ 5 Gbps (via Pogo-Pins) USB 2.0 @ 480 Mbps (via External USB-C Port) Certifications: RoHS, WEEE, CE & UKCA Additional information: *USB 3.1 is the maximum transfer speed that the IntelliSkin can support, but actual transfer speeds will vary based on selected docks, chargers, and device limitations. External USB-C Port on this IntelliSkin is for power only and will not allow data transfer. Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-ZE20C-NG is supplied.

€130.21

In stock 0

36 months warranty

RAM Mounts Tough-Tray™ III Spring Loaded Laptop Tray - for most 10"-17" Laptops, 4-Hole AMPS Connection

(ram2347 – RAM-234-7)

The RAM® Tough-Tray™ III Spring Loaded Laptop Tray (RAM-234-7) is a rugged, highly adjustable vehicle and marine laptop mounting solution designed for secure use in mobile workstations, fleets, boats, and off-road environments. This third-generation Tough-Tray™ improves on earlier designs with a reduced footprint, enhanced adjustability, and simplified assembly. The spring-loaded cradle expands from 10" to 15" wide, securely accommodating laptops up to 17 inches (measured diagonally).

Adjustable side supports fit laptops ranging from 0" to 1.875" thick and include two interchangeable support lengths—long supports for rugged laptops, and shorter supports for slim devices. Side supports adjust horizontally to avoid blocking ports and feature foam padding to protect devices from vibration and scuffs. Swiveling rear supports accommodate laptop depths from 7.625" to 10.625", ensuring a secure and customized fit. An integrated tubular cam lock provides added security by locking the laptop in place, making this tray ideal for professional and commercial applications.

The Tough-Tray™ III also features a built-in recess for the RAM® Adjustable Laptop Screen Support, allowing it to nest cleanly when not in use, and is compatible with the RAM® Power Caddy for convenient power management. Integrated 2-hole AMPS mounting locations around the tray perimeter allow for easy attachment of accessories such as printers, handheld devices, or scanners.

Features

Spring-loaded universal laptop tray accommodates most 10" to 17" laptops (measured diagonally)
Adjustable supports keep laptop secure and leave ports accessible
Compatible with RAM® Power Caddy™ and Adjustable Screen Support
Made of high-strength composites for durability and reliability in the most demanding environments

Tray dimensions - Width Range 10"-15.25", Side Arm Clamp Height 0"-1.875", Depth Range 7.625"-10.625", Tray Thickness 1.26"
Hole pattern - 4-Hole AMPS 1.181" x 1.496"
Material(s) - High strength composite

€167.18

In stock 0

36 months warranty

RAM Mounts Qi2 Wireless Charger Power Delivery - 15 Watt - MagSafe Compatible - USB-C & USB-A Connector

(ramgdscha-8 – RAM-GDS-CHARGE-W2M)

This RAM Mounts Qi2 15W wireless charger is built for the toughest conditions, featuring an IP67 waterproof rating and a durable woven USB-C cord for reliable charging anywhere.
Designed for outdoor enthusiasts, travelers, and professionals, this rugged MagSafe-compatible charger ensures perfect magnetic alignment with iPhone 12, iPhone 13, iPhone 14, iPhone 15, iPhone 16, iPhone 17 and Airpods delivering fast and secure wireless charging.
Whether you're on the road, trail, or water, stay powered up with this waterproof wireless charger, engineered for adventure.

Product features RAM Mounts RAM-GDS-CHARGE-W2M:
15 W Qi2 fast charging capability
IP67 rating for reliable protection against water and dust
Robust cable
MagSafe-compatible starting with iPhone 12 as well as AirPods
Connector: USB-C plug with USB-A adapter
Output Cable Length: approx. 100 cm
Operating Temperature: 0 °C to +40 °C
Storage Temperature: -20 °C to +80 °C
Weight: approx. 45.4 g
Power Specifications:
Operating Frequency: 360 kHz
Stand-by Consumption: ~ 0.008 A / 8 mA at 5V DC
80% Wireless Power Transfer Efficiency or Greater
Supports USB 2.0 BC1.2 power supply (5V)
Supports Qualcomm QC 2.0 and USB PD 2.0
Input Voltage:
USB: 5 V @ 3A
QC 2.0: 9 V @ 2.22A
USB PD 2.0: 5-15V @ 2A
Power Output:
BPP: 5 W
EPP: 7.5 W
MPP: 15 W
Protection Features: Overcurrent protection, Short-circuit protection, Over-temperature protection, RoHS compliant & WEEE compliant
Certifications: IP67, SAE J1455, FCC, CE, E-Mark & RCM
Additional information:
This charger will support up to 8mm charging distance between puck and device.

Devices shown are not included in the delivery.
Only the RAM-GDS-CHARGE-W2M is supplied.

€63.82

In stock 0

No warranty

RAM Mounts 6-Port GDS Powered Dock with Power Delivery for Tablets & Smartphones - In IntelliSkin Next Gen Protective Sleeve

(ramdockngu – RAM-GDS-DOCK-6G1PD-NGU)

This RAM Mounts GDS charging dock is suitable for devices in IntelliSkin Next Gen protective sleeves.
Up to 6 devices can be charged simultaneously.

Product features RAM Mounts RAM-GDS-DOCK-6G1PD-NGU:
Only compatible with IntelliSkin Next Gen protective sleeve
Easy insertion and removal
Charging function
Output Voltage: 5V @ 3A (Per Port) - 9V @ 2A (Per Port)
Output Power: 108W (18W Per Port)
Delivery incl. Power Cable
Product dimensions:
Length: 26,41 cm
Height: 10,16 cm
Additional information:
This dock will not charge devices that do not support Power Delivery (PD).

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-6G1PD-NGU Dock is supplied.

€874.75

In stock 0

No warranty

RAM Mounts GDS Desktop Charging Dock

(ramgdsdock-20 – RAM-GDS-DOCK-D7AU)

RAM Mounts GDS Desktop Charging Dock for Devices in IntelliSkin Tablet Charging/Protective Cases - Built-in USB-C Cable, Side USB-A Port

€169.71

In stock 1

No warranty

RAM Mounts GDS Desktop Dock (Low-Profile) with Power Delivery for (large) Tablets - In IntelliSkin Protective Sleeve - USB-C Connector

(ramgdsdock-91 – RAM-GDS-DOCK-D9U)

This RAM Mounts GDS desktop charging station with Power Delivery is suitable for devices in IntelliSkin protective covers.
The docking station supports all USB Type-C devices with IntelliSkin, Next Gen-, Hard- & Thin-Case protective covers.

Product features RAM Mounts RAM-GDS-DOCK-D9U:
Only compatible with IntelliSkin protective sleeve (USB-C)
Supports Hard & Thin-Cases
Easy insertion and removal
Output Voltage: 20V @ 3A
Input Cable Length: 100 cm
Product dimensions:
Height: 9,37 cm
Width: 6,52 cm
Depth: 12,14 cm
Additional information:
This dock will not support IntelliSkin models with a lightning connector or mUSB connector.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-D9U Dock is supplied.

€110.04

In stock 0

No warranty

RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - USB-C & Dual USB-A Connector

(ramgdsdock-29 – RAM-GDS-DOCK-SAM62CD2U)

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve.
The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in Dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The back of the device holder is prepared to support a round ball base (not included).

Product features RAM Mounts RAM-GDS-DOCK-SAM62CD2U:
Compatible with GDS hand-stand
Easy insertion and removal
Charging function
With Latch
Input Connector: USB-C
Power Output: 15W
Output Voltage: 5-12V @ 3A
Output Connector: 2x USB-A (Peripheral output - 900mAh per Port)
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Additional information:
This product will not support the "No Battery Mode" function.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-SAM62CD2U holder is supplied.

€325.17

In stock 0

36 months warranty

RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - USB-C Connector

(ramdocksam62 – RAM-GDS-DOCK-SAM62CPU)

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve.
The holder is powered by a USB-C connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The back of the device holder is prepared to support a round ball base (not included).

Product features RAM Mounts RAM-GDS-DOCK-SAM62CPU:
Compatible with GDS hand-stand
Easy insertion and removal
Charging function
With Latch
Input Connector: USB-C
Power Output: 15W
Output Voltage: 5-12V @ 3A
Input Cable Length: ca. 21 cm
Prepared for GDS-FAN 12-VDC axial fan
Additional information:
This product will not support the "No Battery Mode" function.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-SAM62CPU holder is supplied.

€196.60

In stock 0

No warranty

RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab S7, S9 & S9 FE - in IntelliSkin Next Gen Protective Sleeve - USB-C Power Supply

(ramgds21 – RAM-GDS-DOCK-SAM76CPU)

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab S7, S9 & S9 FE in IntelliSkin Next Gen protective sleeve.
The holder is powered by a USB-C connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The back of the device holder is prepared to support a round ball base (not included).

Product features RAM Mounts RAM-GDS-DOCK-SAM76CPU:
Compatible with GDS hand-stand
Easy insertion and removal
Charging function
With Latch
Input Connector: USB-C
Power Output: 15W
Output Voltage: 5-12V @ 3A
Input Cable Length: ca. 21 cm
Additional information:
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-SAM76CPU holder is supplied.

€195.76

In stock 0

36 months warranty

RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab S7 FE, S7+, S8+, S9 FE+, S9+ & S10+ - in IntelliSkin Next Gen Protective Sleeve - USB-C Power Supply

(ramgdsdocksam78 – RAM-GDS-DOCK-SAM78CPU)

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab S7 FE (SM-T736B), S7+ (12.4“ SM-T970), S8+, S9 FE+, S9+ & S10+ in IntelliSkin Next Gen protective sleeve.
The holder is powered by a USB-C connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The back of the device holder is prepared to support a round ball base (not included).

Product features RAM Mounts RAM-GDS-DOCK-SAM78CPU:
Compatible with GDS hand-stand
Easy insertion and removal
Charging function
With Latch
Input Connector: USB-C
Power Output: 15W
Output Voltage: 5-12V @ 3A
Input Cable Length: ca. 21 cm
Additional information:
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-SAM78CPU holder is supplied.

€205.84

In stock 2

36 months warranty

RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A9+- in IntelliSkin Next Gen Protective Sleeve - USB-C Connector

(ramgdsdocksam88 – RAM-GDS-DOCK-SAM88CPU)

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab A9+ in IntelliSkin Next Gen protective sleeve.
The holder is powered by a USB-C connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The back of the device holder is prepared to support a round ball base (not included).

Product features RAM Mounts RAM-GDS-DOCK-SAM88CDU:
Compatible with GDS hand-stand
Easy insertion and removal
Charging function
With Latch
Input Connector: USB-C
Power Output: 15W
Output Voltage: 5-12V @ 3A
Input Cable Length: ca. 21 cm
Additional information:
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-SAM88CDU holder is supplied.

€248.70

In stock 1

36 months warranty

RAM Mounts GDS Uni-Conn Charging Dock - 2-Hole AMPS Pattern - USB-C & USB-A Connector - Screw Set

(ramgdsdocku1cdu – RAM-GDS-DOCK-U1CDU)

The RAM Mounts GDS Uni-Conn Holder is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the USB-A port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCK-U1CDU: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Easy insertion and removal Charging function & data transfer Input Connector: USB-C Power Output: 15W Output voltage: 5 - 12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 215 mm Output Cable Length: ca. 215 mm Product dimensions: Overall Width: 8,02 cm Overall Height: 21,44 cm Overall Depth: 7,70 cm Weight: ca. 223 g Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-U1CDU holder is supplied.

€169.52

In stock 1

36 months warranty

RAM Mounts GDS Uni-Conn Charging Dock - 2-Hole AMPS Pattern - USB-C Connector - Screw Set

(ramgdsdocku1cpu – RAM-GDS-DOCK-U1CPU)

The RAM Mounts GDS Uni-Conn Holder is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCK-U1CPU: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output voltage: 5 - 12V @ 3A Input Cable Length: ca. 215 mm Product dimensions: Overall Width: 8,02 cm Overall Height: 21,44 cm Overall Depth: 7,70 cm Weight: ca. 223 g Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-U1CPU holder is supplied.

€106.24

In stock 5

36 months warranty

RAM Mounts GDS Uni-Conn Charging Dock with Release Button - 2-Hole AMPS - USB-C & Dual USB-A Connector - Screw Set

(ramgdschgdock5 – RAM-GDS-DOCK-U4CD2U)

The RAM Mounts GDS Uni Conn snap in docking station with release button is an innovative and universally compatible docking solution.
The integrated quick release mechanism ensures a secure hold of the device.
When docked, power is supplied via a pogo pin connection in combination with a USB-C port.
With the dual USB-A port, you can integrate two peripheral device into your setup.
The intuitive design enables easy docking and undocking.
The device equipped with an IntelliSkin charging protective case is inserted into the dock and securely snaps into place with slight pressure.
For removal, a simple press of the side release button allows the tablet to be easily removed.
For proper use, the corresponding GDS Uni Conn adapter (RAM-GDS-U1U or RAM-GDS-U1AU) must be installed on the intended IntelliSkin charging protective case.

Product features RAM Mounts RAM-GDS-DOCK-U4CD2U:
Only compatible with IntelliSkin & Uni-Conn adapter
Snap-In function
Release button
Easy insertion and removal
Charging function
Input Connector: USB-C
Power Output: max. 60W
Output Voltage: 5 - 20V @ 3A
Output Connector: 2x USB-A (Peripheral output - 900mAh per Port)
Input Cable Length: ca. 215 mm
Output Cable Length: ca. 215 mm
Weight: ca. 336 g
Additional information:
GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts.
Consider the GDS Tough-Dock for extreme applications.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-U4CD2U holder is supplied.

€235.25

In stock 0

36 months warranty

RAM Mounts GDS Uni-Conn Charging Dock with Release Button - 2-Hole AMPS - USB-C & USB-A Connector - Screw Set

(ramgdschdock – RAM-GDS-DOCK-U4CDU)

The RAM Mounts GDS Uni Conn snap in docking station with release button is an innovative and universally compatible docking solution.
The integrated quick release mechanism ensures a secure hold of the device.
When docked, power is supplied via a pogo pin connection in combination with a USB-C port.
With the USB-A port, you can integrate a peripheral device into your setup.
The intuitive design enables easy docking and undocking.
The device equipped with an IntelliSkin charging protective case is inserted into the dock and securely snaps into place with slight pressure.
For removal, a simple press of the side release button allows the tablet to be easily removed.
For proper use, the corresponding GDS Uni Conn adapter (RAM-GDS-U1U or RAM-GDS-U1AU) must be installed on the intended IntelliSkin charging protective case.

Product features RAM Mounts RAM-GDS-DOCK-U4CDU:
Only compatible with IntelliSkin & Uni-Conn adapter
Snap-In function
Release button
Easy insertion and removal
Charging function
Input Connector: USB-C
Power Output: max. 60W
Output Voltage: 5 - 20V @ 3A
Output Connector: USB-A (Peripheral output - 500mAh)
Input Cable Length: ca. 215 mm
Output Cable Length: ca. 215 mm
Weight: ca. 318 g
Additional information:
GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts.
Consider the GDS Tough-Dock for extreme applications.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-U4CDU holder is supplied.

€218.45

In stock 0

No warranty

RAM Mounts GDS Uni-Conn Charging Dock with Release Button - 2-Hole AMPS - USB-C & USB-C/A Connector - Screw Set

(ramgdsdcku-5 – RAM-GDS-DOCK-U4CP-CAU)

The RAM Mounts GDS Uni Conn snap in docking station with release button is an innovative and universally compatible docking solution.
The integrated quick release mechanism ensures a secure hold of the device.
When docked, power is supplied via a pogo pin connection in combination with a USB-C port.
With the USB-C & USB-A port, you can integrate two peripheral device into your setup.
The intuitive design enables easy docking and undocking.
The device equipped with an IntelliSkin charging protective case is inserted into the dock and securely snaps into place with slight pressure.
For removal, a simple press of the side release button allows the tablet to be easily removed.
For proper use, the corresponding GDS Uni Conn adapter (RAM-GDS-U1U or RAM-GDS-U1AU) must be installed on the intended IntelliSkin charging protective case.

Product features RAM Mounts RAM-GDS-DOCK-U4CP-CAU:
Only compatible with IntelliSkin & Uni-Conn adapter
Snap-In function
Release button
Easy insertion and removal
Charging function
Input Connector: USB-C
Power Output: max. 60W
Output Voltage: 5 - 20V @ 3A
Output Connector: USB-C & USB-A (Peripheral output - 900mAh per Port)
Input Cable Length: ca. 215 mm
Output Cable Length: ca. 215 mm
Weight: ca. 336 g
Additional information:
GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts.
Consider the GDS Tough-Dock for extreme applications.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-U4CP-CAU holder is supplied.

€239.45

In stock 0

No warranty

RAM Mounts GDS Uni-Conn Charging Dock with Release Button - 2-Hole AMPS - USB-C & USB-C Connector - Screw Set

(ramgdsdcku-4 – RAM-GDS-DOCK-U4CP-CU)

The RAM Mounts GDS Uni Conn snap in docking station with release button is an innovative and universally compatible docking solution.
The integrated quick release mechanism ensures a secure hold of the device.
When docked, power is supplied via a pogo pin connection in combination with a USB-C port.
With the additional USB-C port, you can integrate a peripheral device into your setup.
The intuitive design enables easy docking and undocking.
The device equipped with an IntelliSkin charging protective case is inserted into the dock and securely snaps into place with slight pressure.
For removal, a simple press of the side release button allows the tablet to be easily removed.
For proper use, the corresponding GDS Uni Conn adapter (RAM-GDS-U1U or RAM-GDS-U1AU) must be installed on the intended IntelliSkin charging protective case.

Product features RAM Mounts RAM-GDS-DOCK-U4CP-CU:
Only compatible with IntelliSkin & Uni-Conn adapter
Snap-In function
Release button
Easy insertion and removal
Charging function
Input Connector: USB-C
Power Output: max. 60W
Output Voltage: 5 - 20V @ 3A
Output Connector: USB-C (Peripheral output - 500mAh)
Input Cable Length: ca. 215 mm
Output Cable Length: ca. 215 mm
Weight: ca. 308 g
Additional information:
GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts.
Consider the GDS Tough-Dock for extreme applications.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-U4CP-CU holder is supplied.

€226.85

In stock 0

No warranty

RAM Mounts GDS Uni-Conn Charging Dock with Release Button - 2-Hole AMPS - USB-C & USB-A/RJ45 Connector - Screw Set

(ramgdschdock2 – RAM-GDS-DOCK-U4CP-RJ45AU)

The RAM Mounts GDS Uni Conn snap in docking station with release button is an innovative and universally compatible docking solution.
The integrated quick release mechanism ensures a secure hold of the device.
When docked, power is supplied via a pogo pin connection in combination with a USB-C port.
With the USB-C & USB-A port, you can integrate a peripheral device into your setup.
The intuitive design enables easy docking and undocking.
The device equipped with an IntelliSkin charging protective case is inserted into the dock and securely snaps into place with slight pressure.
For removal, a simple press of the side release button allows the tablet to be easily removed.
For proper use, the corresponding GDS Uni Conn adapter (RAM-GDS-U1U or RAM-GDS-U1AU) must be installed on the intended IntelliSkin charging protective case.

Product features RAM Mounts RAM-GDS-DOCK-U4CP-RJ45AU:
Only compatible with IntelliSkin & Uni-Conn adapter
Snap-In function
Release button
Easy insertion and removal
Charging function
Input Connector: USB-C
Power Output: max. 60W
Output Voltage: 5 - 20V @ 3A
Output Connector: USB-A & RJ45 (Peripheral output - 900mAh)
Input Cable Length: ca. 215 mm
Output Cable Length: ca. 215 mm
Weight: ca. 349 g
Additional information:
GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts.
Consider the GDS Tough-Dock for extreme applications.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-U4CP-RJ45AU holder is supplied.

€210.04

In stock 0

No warranty

RAM Mounts GDS Uni-Conn Charging Dock with Release Button - 2-Hole AMPS - USB-C Connector - Screw Set

(ramgdsdcku-3 – RAM-GDS-DOCK-U4CPU)

The RAM Mounts GDS Uni Conn snap in docking station with release button is an innovative and universally compatible docking solution.
The integrated quick release mechanism ensures a secure hold of the device.
When docked, power is supplied via a pogo pin connection in combination with a USB-C port.
The intuitive design enables easy docking and undocking.
The device equipped with an IntelliSkin charging protective case is inserted into the dock and securely snaps into place with slight pressure.
For removal, a simple press of the side release button allows the tablet to be easily removed.
For proper use, the corresponding GDS Uni Conn adapter (RAM-GDS-U1U or RAM-GDS-U1AU) must be installed on the intended IntelliSkin charging protective case.

Product features RAM Mounts RAM-GDS-DOCK-U4CPU:
Only compatible with IntelliSkin & Uni-Conn adapter
Snap-In function
Release button
Easy insertion and removal
Charging function
Input Connector: USB-C
Power Output: max. 60W
Output Voltage: 5 - 20V @ 3A
Input Cable Length: ca. 215 mm
Weight: ca. 268 g
Additional information:
GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts.
Consider the GDS Tough-Dock for extreme applications.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-U4CPU holder is supplied.

€126.01

In stock 0

No warranty

GDS Uni-Conn Powered USB-C Dock with Release Button

(ramgdsdock-63 – RAM-GDS-DOCK-U5CPU)

The GDS^® Uni-Conn^™ Powered USB-C Dock with Release Button (RAM-GDS-DOCK-U5CPU) is a versatile quick-release docking solution for devices enclosed in an IntelliSkin^® with rear pogo pads. Power is provided to the pogo pins integrated into the GDS^® Uni-Conn^™ adapter via the USB-C connector. It features an easy docking and undocking process; simply place the IntelliSkin^®-wrapped device into the base of the dock and push it to snap into place. When undocking, a simple push of the release button frees the tablet. This dock features a 2-hole AMPS pattern, allowing it to be integrated into the RAM^® ball and socket mounting system with a RAM^® Diamond or Round Ball Base. The snap-in attachment method makes this dock ideal for rugged environments, including vehicles. The GDS^® Uni-conn^™ dock is backed by a 3-year warranty. One Dock to Connect Them All^™ Always Protected. Always Connected.^®

€109.20

In stock 0

No warranty

RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock - 2-Hole AMPS Pattern - USB-C & USB-A Connector - Screw-Set

(ramgdsdockv12 – RAM-GDS-DOCK-V12-U1CPDU)

The RAM Mounts GDS Uni-Conn spring-loaded holder is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. An additional USB-A port allows you to integrate a peripheral device into your setup. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCK-V12-U1CPDU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Charging function Input Connector: USB-C & USB-A (Peripheral output - 500mAh) Power Output: 15W Output Voltage: 5V - 12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-V12-U1CPDU holder is supplied.

€237.77

In stock 1

36 months warranty

RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock - 2-Hole AMPS Pattern - USB-C Connector - Screw-Set

(ramgdsdockv12-2 – RAM-GDS-DOCK-V12-U1CPU)

The RAM Mounts GDS Uni-Conn spring-loaded holder is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCK-V12-U1CPU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output Voltage: 5V-12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-V12-U1CPU holder is supplied.

€153.74

In stock 5

36 months warranty

RAM Mounts GDS Holder for Zebra EC50/55

(ramgdsdock-22 – RAM-GDS-DOCK-V12-ZE16CPU)

This RAM Mounts GDS holder is suitable for Zebra EC50 & EC 55 with the IntelliSkin protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.
The spring-loaded design holds the device tightly and securely in the cradle and is also charged.
While keeping the Zebra EC5x secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable.
Available space in the back accommodates standard and extended battery packs as well with the Zebra hand strap.
The back of the device holder is prepared to support a diamond ball base (not included).

Product features RAM Mounts RAM-GDS-DOCK-V12-ZE16CPU:
Only compatible with the IntelliSkin protective sleeve
Spring-loaded design for easy insertion and removal
Integrated Stylus holder
Charging function
Input Connector: USB-C
Input Cable Length: ca. 100 cm
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE16-NG protective sleeve.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-V12-ZE16CPU holder is supplied.

€157.10

In stock 2

36 months warranty

RAM Mounts GDS Holder for Zebra TC22/27 & TC53/58

(ramgdsdock-23 – RAM-GDS-DOCK-V12-ZE2434CPU)

This RAM Mounts GDS holder is suitable for Zebra TC2x & TC5x series with the IntelliSkin protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.
The spring-loaded design holds the device tightly and securely in the cradle and is also charged.
While keeping the Zebra Handheld secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable.
Available space in the back accommodates extended battery packs and the Zebra hand strap.
The back of the device holder is prepared to support a diamond ball base (not included).

Product features RAM Mounts RAM-GDS-DOCK-V12-ZE2434CPU:
Only compatible with the IntelliSkin protective sleeve
Spring-loaded design for easy insertion and removal
Integrated Stylus holder
Charging function
Input Connector: USB-C
Input Cable Length: ca. 100 cm
Additional information:
To use the holder you need the IntelliSkin protective sleeve for the Zebra handheld.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-V12-ZE2434CPU holder is supplied.

€157.10

In stock 0

36 months warranty

RAM Mounts GDS Holder for Zebra TC73/78

(ramgdsdock-24 – RAM-GDS-DOCK-V12-ZE35CPDU)

This RAM Mounts GDS holder is suitable for Zebra TC73 & TC78 with the IntelliSkin protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.
The spring-loaded design holds the device tightly and securely in the cradle and is also charged.
While keeping the Zebra TC7x secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable.
Available space in the back accommodates extended battery packs and the Zebra hand strap.
The back of the device holder is prepared to support a diamond ball base (not included).

Product features RAM Mounts RAM-GDS-DOCK-V12-ZE35CPDU:
Only compatible with the IntelliSkin protective sleeve
Spring-loaded design for easy insertion and removal
Integrated Stylus holder
Charging function
Input Connector: USB-C
Output Connector: USB-A (Peripheral output - 500mAh)
Input Cable Length: ca. 100 cm
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE35-NG protective sleeve.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-V12-ZE35CPDU holder is supplied.

€235.25

In stock 0

36 months warranty

RAM Mounts GDS Holder for Zebra TC73/78

(ramgdsdock-8 – RAM-GDS-DOCK-V12-ZE35CPU)

This RAM Mounts GDS holder is suitable for Zebra TC73 & TC78 with the IntelliSkin protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.
The spring-loaded design holds the device tightly and securely in the cradle and is also charged.
While keeping the Zebra TC7x secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable.
Available space in the back accommodates standard and extended battery packs as well with the Zebra hand strap.
The back of the device holder is prepared to support a diamond ball base (not included).

Product features RAM Mounts RAM-GDS-DOCK-V12-ZE35CPU:
Only compatible with the IntelliSkin protective sleeve
Spring-loaded design for easy insertion and removal
Integrated Stylus holder
Charging function
Input Connector: USB-C
Input Cable Length: ca. 100 cm
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE35-NG protective sleeve.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-V12-ZE35CPU holder is supplied.

€157.10

In stock 3

No warranty

RAM Mounts GDS Holder for Samsung XCover 6 Pro, XCover 7 Pro & Zebra EM45 - in IntelliSkin Protective Sleeve - USB-C Power Supply

(ramgdsdockv3 – RAM-GDS-DOCK-V3CPAU)

This RAM Mounts GDS holder is suitable for the Samsung XCover 6 Pro or XCover 7 Pro in IntelliSkin protective sleeve.
The holder is powered by a USB-C connection and charges the device in the dock.
To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.
The spring-loaded design holds the device tightly and securely in the cradle.
The back of the device holder is prepared to support a diamond ball base (not included).

Product features RAM Mounts RAM-GDS-DOCK-V3CPAU:
Not compatible with hand-strap
Spring-loaded design for easy insertion and removal
Charging function
Input Connector: USB-C
Output Voltage: 20V @ 3A
Input Cable Length: ca. 21 cm
Additional information:
This dock will not support the XCover6 Pro or XCover 7 Pro when using a Hand Strap accessory.
For an alternate dock that supports that hand strap, see RAM-GDS-DOCK-V11CU.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-V3CPAU holder is supplied.

€129.37

In stock 1

36 months warranty

RAM Mounts GDS EZ-Roll'r Holder for Zebra ET40/45 (8")

(ramgdsdock-2 – RAM-GDS-DOCK-ZE20PD2U)

This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-GDS-DOCK-ZE20PD2U:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-ZE20PD2U holder is supplied.

€291.55

In stock 3

36 months warranty

RAM Mounts GDS EZ-Roll'r Holder for Zebra ET40/45 (8")

(ramgdsdock-3 – RAM-GDS-DOCK-ZE20PDU)

This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-GDS-DOCK-ZE20PDU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-ZE20PDU holder is supplied.

€276.43

In stock 3

36 months warranty

RAM Mounts GDS EZ-Roll'r Holder for Zebra ET40/45 (8")

(ramgdsdock-28 – RAM-GDS-DOCK-ZE20PU)

This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-GDS-DOCK-ZE20PU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Input Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-ZE20PU holder is supplied.

€190.71

In stock 1

36 months warranty

RAM Mounts GDS EZ-Roll'r Holder for Zebra ET40/45 (10")

(ramgdsdock-4 – RAM-GDS-DOCK-ZE21PD2U)

This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-GDS-DOCK-ZE21PD2U:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-ZE21PD2U holder is supplied.

€290.71

In stock 0

36 months warranty

RAM Mounts GDS EZ-Roll'r Holder for Zebra ET40/45 (10")

(ramholder106 – RAM-GDS-DOCK-ZE21PDU)

This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-GDS-DOCK-ZE21PDU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Transfer Speed: 12Mbps
Input Cable Length: ca. 21 cm
Output Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-ZE21PDU holder is supplied.

€275.59

In stock 0

36 months warranty

RAM Mounts GDS EZ-Roll'r Holder for Zebra ET40/45 (10")

(ramgdsdock-5 – RAM-GDS-DOCK-ZE21PU)

This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
The cut-outs on the buttons and ports allow you to continue using them without any problems.
The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.
Tablet accessories such as PowerPack batteries can also be stored inside.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).

Product features RAM Mounts RAM-GDS-DOCK-ZE21PU:
Compatible with PowerPack batterie
Easy insertion and removal
Additional mounting plate for attaching additional devices or accessories
Can only be used with IntelliSkin Next Generation protective sleeve
Input Connector: USB-C
Power Output: 60W
Output Voltage: 5-20V @ 3A
Input Cable Length: ca. 21 cm
Certifications: RoHS, WEEE, CE & UKCA
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-ZE21PU holder is supplied.

€189.87

In stock 4

36 months warranty

RAM Mounts GDS Uni-Conn Charging Dock (Key-Locking) with Release Button - 2-Hole AMPS - USB-C & Dual USB-A Connector - Screw Set

(ramgdschgdock6 – RAM-GDS-DOCKL-U4CD2U)

The RAM Mounts GDS Uni Conn snap in docking station with release button and key-locking is an innovative and universally compatible docking solution.
The integrated quick release mechanism ensures a secure hold of the device.
When docked, power is supplied via a pogo pin connection in combination with a USB-C port.
With the dual USB-A port, you can integrate two peripheral device into your setup.
The intuitive design enables easy docking and undocking.
The device equipped with an IntelliSkin charging protective case is inserted into the dock and securely snaps into place with slight pressure.
For removal, a simple press of the side release button allows the tablet to be easily removed.
For proper use, the corresponding GDS Uni Conn adapter (RAM-GDS-U1U or RAM-GDS-U1AU) must be installed on the intended IntelliSkin charging protective case.

Product features RAM Mounts RAM-GDS-DOCKL-U4CD2U:
Only compatible with IntelliSkin & Uni-Conn adapter
Snap-In function
Release button with key-locking
Easy insertion and removal
Charging function
Input Connector: USB-C
Power Output: max. 60W
Output Voltage: 5 - 20V @ 3A
Output Connector: 2x USB-A (Peripheral output - 900mAh per Port)
Input Cable Length: ca. 215 mm
Output Cable Length: ca. 215 mm
Weight: ca. 318 g
Additional information:
GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts.
Consider the GDS Tough-Dock for extreme applications.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-U4CD2U holder is supplied.

€260.46

In stock 0

36 months warranty

RAM Mounts GDS Uni-Conn Charging Dock (Key-Locking) with Release Button - 2-Hole AMPS - USB-C & USB-A Connector - Screw Set

(ramgdschgdock3 – RAM-GDS-DOCKL-U4CDU)

The RAM Mounts GDS Uni Conn snap in docking station with release button and key-locking is an innovative and universally compatible docking solution.
The integrated quick release mechanism ensures a secure hold of the device.
When docked, power is supplied via a pogo pin connection in combination with a USB-C port.
With the USB-A port, you can integrate a peripheral device into your setup.
The intuitive design enables easy docking and undocking.
The device equipped with an IntelliSkin charging protective case is inserted into the dock and securely snaps into place with slight pressure.
For removal, a simple press of the side release button allows the tablet to be easily removed.
For proper use, the corresponding GDS Uni Conn adapter (RAM-GDS-U1U or RAM-GDS-U1AU) must be installed on the intended IntelliSkin charging protective case.

Product features RAM Mounts RAM-GDS-DOCKL-U4CDU:
Only compatible with IntelliSkin & Uni-Conn adapter
Snap-In function
Release button with key-locking
Easy insertion and removal
Charging function
Input Connector: USB-C
Power Output: max. 60W
Output Voltage: 5 - 20V @ 3A
Output Connector: USB-A (Peripheral output - 500mAh)
Input Cable Length: ca. 215 mm
Output Cable Length: ca. 215 mm
Weight: ca. 318 g
Additional information:
GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts.
Consider the GDS Tough-Dock for extreme applications.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-U4CDU holder is supplied.

€243.66

In stock 0

36 months warranty

RAM Mounts GDS Uni-Conn Charging Dock (Key-Locking) with Release Button - 2-Hole AMPS - USB-C & USB-C/A Connector - Screw Set

(ramgdschgdock4 – RAM-GDS-DOCKL-U4CP-CAU)

The RAM Mounts GDS Uni Conn snap in docking station with release button and key-locking is an innovative and universally compatible docking solution.
The integrated quick release mechanism ensures a secure hold of the device.
When docked, power is supplied via a pogo pin connection in combination with a USB-C port.
With the USB-C & USB-A port, you can integrate two peripheral device into your setup.
The intuitive design enables easy docking and undocking.
The device equipped with an IntelliSkin charging protective case is inserted into the dock and securely snaps into place with slight pressure.
For removal, a simple press of the side release button allows the tablet to be easily removed.
For proper use, the corresponding GDS Uni Conn adapter (RAM-GDS-U1U or RAM-GDS-U1AU) must be installed on the intended IntelliSkin charging protective case.

Product features RAM Mounts RAM-GDS-DOCKL-U4CP-CAU:
Only compatible with IntelliSkin & Uni-Conn adapter
Snap-In function
Release button with key-locking
Easy insertion and removal
Charging function
Input Connector: USB-C
Power Output: max. 60W
Output Voltage: 5 - 20V @ 3A
Output Connector: USB-C & USB-A (Peripheral output - 900mAh per Port)
Input Cable Length: ca. 215 mm
Output Cable Length: ca. 215 mm
Weight: ca. 358 g
Additional information:
GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts.
Consider the GDS Tough-Dock for extreme applications.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-U4CP-CAU holder is supplied.

€264.66

In stock 0

36 months warranty

RAM Mounts GDS Uni-Conn Charging Dock (Key-Locking) with Release Button - 2-Hole AMPS - USB-C & USB-C Connector - Screw Set

(ramgdschgdock – RAM-GDS-DOCKL-U4CP-CU)

The RAM Mounts GDS Uni Conn snap in docking station with release button and key-locking is an innovative and universally compatible docking solution.
The integrated quick release mechanism ensures a secure hold of the device.
When docked, power is supplied via a pogo pin connection in combination with a USB-C port.
With the additional USB-C port, you can integrate a peripheral device into your setup.
The intuitive design enables easy docking and undocking.
The device equipped with an IntelliSkin charging protective case is inserted into the dock and securely snaps into place with slight pressure.
For removal, a simple press of the side release button allows the tablet to be easily removed.
For proper use, the corresponding GDS Uni Conn adapter (RAM-GDS-U1U or RAM-GDS-U1AU) must be installed on the intended IntelliSkin charging protective case.

Product features RAM Mounts RAM-GDS-DOCKL-U4CP-CU:
Only compatible with IntelliSkin & Uni-Conn adapter
Snap-In function
Release button with key-locking
Easy insertion and removal
Charging function
Input Connector: USB-C
Power Output: max. 60W
Output Voltage: 5 - 20V @ 3A
Output Connector: USB-C (Peripheral output - 500mAh)
Input Cable Length: ca. 215 mm
Output Cable Length: ca. 215 mm
Weight: ca. 308 g
Additional information:
GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts.
Consider the GDS Tough-Dock for extreme applications.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-U4CP-CU holder is supplied.

€247.86

In stock 0

36 months warranty

RAM Mounts GDS Uni-Conn Charging Dock (Key-Locking) with Release Button - 2-Hole AMPS - USB-C & USB-A/RJ45 Connector - Screw Set

(ramgdschgdock7 – RAM-GDS-DOCKL-U4CP-RJ45AU)

The RAM Mounts GDS Uni Conn snap in docking station with release button and key-locking is an innovative and universally compatible docking solution.
The integrated quick release mechanism ensures a secure hold of the device.
When docked, power is supplied via a pogo pin connection in combination with a USB-C port.
With the USB-C & USB-A port, you can integrate a peripheral device into your setup.
The intuitive design enables easy docking and undocking.
The device equipped with an IntelliSkin charging protective case is inserted into the dock and securely snaps into place with slight pressure.
For removal, a simple press of the side release button allows the tablet to be easily removed.
For proper use, the corresponding GDS Uni Conn adapter (RAM-GDS-U1U or RAM-GDS-U1AU) must be installed on the intended IntelliSkin charging protective case.

Product features RAM Mounts RAM-GDS-DOCKL-U4CP-RJ45AU:
Only compatible with IntelliSkin & Uni-Conn adapter
Snap-In function
Release button with key-locking
Easy insertion and removal
Charging function
Input Connector: USB-C
Power Output: max. 60W
Output Voltage: 5 - 20V @ 3A
Output Connector: USB-A & RJ45 (Peripheral output - 900mAh)
Input Cable Length: ca. 215 mm
Output Cable Length: ca. 215 mm
Weight: ca. 372 g
Additional information:
GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts.
Consider the GDS Tough-Dock for extreme applications.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-U4CP-RJ45AU holder is supplied.

€229.37

In stock 0

36 months warranty

RAM Mounts GDS Uni-Conn Charging Dock (Key-Locking) with Release Button - 2-Hole AMPS - USB-C Connector - Screw Set

(ramgdsdckl – RAM-GDS-DOCKL-U4CPU)

The RAM Mounts GDS Uni Conn snap in docking station with release button and key-locking is an innovative and universally compatible docking solution.
The integrated quick release mechanism ensures a secure hold of the device.
When docked, power is supplied via a pogo pin connection in combination with a USB-C port.
The intuitive design enables easy docking and undocking.
The device equipped with an IntelliSkin charging protective case is inserted into the dock and securely snaps into place with slight pressure.
For removal, a simple press of the side release button allows the tablet to be easily removed.
For proper use, the corresponding GDS Uni Conn adapter (RAM-GDS-U1U or RAM-GDS-U1AU) must be installed on the intended IntelliSkin charging protective case.

Product features RAM Mounts RAM-GDS-DOCKL-U4CPU:
Only compatible with IntelliSkin & Uni-Conn adapter
Snap-In function
Release button with key-locking
Easy insertion and removal
Charging function
Input Connector: USB-C
Power Output: max. 60W
Output voltage: 5 - 20V @ 3A
Input Cable Length: ca. 215 mm
Weight: ca. 308 g
Additional information:
GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts.
Consider the GDS Tough-Dock for extreme applications.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-U4CPU holder is supplied.

€151.22

In stock 0

No warranty

RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock With Key-Locking - 2-Hole AMPS Pattern - USB-C Connector - Screw-Set

(ramgdsdocklv12 – RAM-GDS-DOCKL-V12-U1CPU)

The RAM Mounts GDS Uni-Conn spring-loaded holder with key-locking is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCKL-V12-U1CPU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Key locking Charging function Input Connector: USB-C Ausgangsleistung: 15W Ausgangsspannung: 5V - 12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-V12-U1CPU holder is supplied.

€213.40

In stock 1

36 months warranty

RAM Mounts GDS Holder (Key-Locking) for Zebra EC50/55

(ramgdsdock-9 – RAM-GDS-DOCKL-V12-ZE16CPDHU)

This RAM Mounts GDS (Key-Locking) holder is suitable for Zebra EC50 & EC 55 with the IntelliSkin protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.
To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.
The spring-loaded design holds the device tightly and securely in the cradle and is also charged.
While keeping the Zebra EC5x secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable.
Available space in the back accommodates standard and extended battery packs as well with the Zebra hand strap.
The back of the device holder is prepared to support a diamond ball base (not included).

Product features RAM Mounts RAM-GDS-DOCKL-V12-ZE16CPDHU:
Only compatible with the IntelliSkin protective sleeve
Spring-loaded design for easy insertion and removal
Integrated Stylus holder
Charging function
Heated Pogo-Pins
Lockable with Keys
Input Connector: USB-C
Output Connector: USB-A (Peripheral output - 500mAh)
Input Cable Length: ca. 100 cm
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE16-NG protective sleeve.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-V12-ZE16CPDHU holder is supplied.

€321.81

In stock 2

36 months warranty

RAM Mounts GDS Holder (Key-Locking) for Zebra EC50/55

(ramgdsdock-10 – RAM-GDS-DOCKL-V12-ZE16CPDU)

This RAM Mounts GDS (Key-Locking) holder is suitable for Zebra EC50 & EC 55 with the IntelliSkin protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.
The spring-loaded design holds the device tightly and securely in the cradle and is also charged.
While keeping the Zebra EC5x secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable.
Available space in the back accommodates standard and extended battery packs as well with the Zebra hand strap.
The back of the device holder is prepared to support a diamond ball base (not included).

Product features RAM Mounts RAM-GDS-DOCKL-V12-ZE16CPDU:
Only compatible with the IntelliSkin protective sleeve
Spring-loaded design for easy insertion and removal
Integrated Stylus holder
Charging function
Lockable with Keys
Input Connector: USB-C
Output Connector: USB-A (Peripheral output - 500mAh)
Input Cable Length: ca. 100 cm
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE16-NG protective sleeve.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-V12-ZE16CPDU holder is supplied.

€284.83

In stock 2

36 months warranty

RAM Mounts GDS Holder for Zebra EC50/55

(ramgdsdock-11 – RAM-GDS-DOCKL-V12-ZE16CPU)

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCK-V12-ZE16CPU holder is supplied.

€209.20

In stock 2

36 months warranty

RAM Mounts GDS Holder (Key-Locking) for Zebra TC22/27 & TC53/58

(ramgdsdock-12 – RAM-GDS-DOCKL-V12-ZE2434CPDU)

This RAM Mounts GDS (Key-Locking) holder is suitable for Zebra TC2x & TC5x series with the IntelliSkin protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.
The spring-loaded design holds the device tightly and securely in the cradle and is also charged.
While keeping the Zebra Handheld secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable.
Available space in the back accommodates extended battery packs and the Zebra hand strap.
The back of the device holder is prepared to support a diamond ball base (not included).

Product features RAM Mounts RAM-GDS-DOCKL-V12-ZE2434CPDU:
Only compatible with the IntelliSkin protective sleeve
Spring-loaded design for easy insertion and removal
Integrated Stylus holder
Charging function
Lockable with key
Input Connector: USB-C
Output Connector: USB-A (Peripheral output - 500mAh)
Input Cable Length: ca. 100 cm
Additional information:
To use the holder you need the IntelliSkin protective sleeve for the Zebra handheld.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-V12-ZE2434CPDU holder is supplied.

€283.15

In stock 0

36 months warranty

RAM Mounts GDS Holder (Key-Locking) for Zebra TC22/27 & TC53/58

(ramgdsdock-13 – RAM-GDS-DOCKL-V12-ZE2434CPU)

This RAM Mounts GDS (Key-Locking) holder is suitable for Zebra TC2x & TC5x series with the IntelliSkin protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.
The spring-loaded design holds the device tightly and securely in the cradle and is also charged.
While keeping the Zebra Handheld secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable.
Available space in the back accommodates extended battery packs and the Zebra hand strap.
The back of the device holder is prepared to support a diamond ball base (not included).

Product features RAM Mounts RAM-GDS-DOCKL-V12-ZE2434CPU:
Only compatible with the IntelliSkin protective sleeve
Spring-loaded design for easy insertion and removal
Integrated Stylus holder
Charging function
Lockable with key
Input Connector: USB-C
Input Cable Length: ca. 100 cm
Additional information:
To use the holder you need the IntelliSkin protective sleeve for the Zebra handheld.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-V12-ZE2434CPU holder is supplied.

€208.36

In stock 2

36 months warranty

RAM Mounts GDS Holder (Key-Locking) for Zebra TC73/78

(ramgdsdock-14 – RAM-GDS-DOCKL-V12-ZE35CPDHU)

This RAM Mounts GDS (Key-Locking) holder is suitable for Zebra TC73 & TC78 with the IntelliSkin protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.
To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.
The spring-loaded design holds the device tightly and securely in the cradle and is also charged.
While keeping the Zebra TC7x secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable.
Available space in the back accommodates extended battery packs and the Zebra hand strap.
The back of the device holder is prepared to support a diamond ball base (not included).

Product features RAM Mounts RAM-GDS-DOCKL-V12-ZE35CPDHU:
Only compatible with the IntelliSkin protective sleeve
Spring-loaded design for easy insertion and removal
Integrated Stylus holder
Charging function
Heated Pogo-Pins
Lockable with key
Input Connector: USB-C
Output Connector: USB-A (Peripheral output - 500mAh)
Input Cable Length: ca. 100 cm
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE35-NG protective sleeve.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-V12-ZE35CPDHU holder is supplied.

€321.81

In stock 2

36 months warranty

RAM Mounts GDS Holder (Key-Locking) for Zebra TC73/78

(ramgdsdock-15 – RAM-GDS-DOCKL-V12-ZE35CPDU)

This RAM Mounts GDS (Key-Locking) holder is suitable for Zebra TC73 & TC78 with the IntelliSkin protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.
The spring-loaded design holds the device tightly and securely in the cradle and is also charged.
While keeping the Zebra TC7x secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable.
Available space in the back accommodates extended battery packs and the Zebra hand strap.
The back of the device holder is prepared to support a diamond ball base (not included).

Product features RAM Mounts RAM-GDS-DOCKL-V12-ZE35CPDU:
Only compatible with the IntelliSkin protective sleeve
Spring-loaded design for easy insertion and removal
Integrated Stylus holder
Charging function
Lockable with Keys
Input Connector: USB-C
Output Connector: USB-A (Peripheral output - 500mAh)
Input Cable Length: ca. 100 cm
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE35-NG protective sleeve.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-V12-ZE35CPDU holder is supplied.

€284.83

In stock 2

36 months warranty

RAM Mounts GDS Holder (Key-Locking) for Zebra TC73/78

(ramgdsdock-16 – RAM-GDS-DOCKL-V12-ZE35CPU)

This RAM Mounts GDS (Key-Locking) holder is suitable for Zebra TC73 & TC78 with the IntelliSkin protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.
The spring-loaded design holds the device tightly and securely in the cradle and is also charged.
While keeping the Zebra TC7x secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable.
Available space in the back accommodates standard and extended battery packs as well with the Zebra hand strap.
The back of the device holder is prepared to support a diamond ball base (not included).

Product features RAM Mounts RAM-GDS-DOCKL-V12-ZE35CPU:
Only compatible with the IntelliSkin protective sleeve
Spring-loaded design for easy insertion and removal
Integrated Stylus holder
Charging function
Lockable with Keys
Input Connector: USB-C
Input Cable Length: ca. 100 cm
Additional information:
To use the holder you need the RAM-GDS-SKIN-ZE35-NG protective sleeve.

Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-V12-ZE35CPU holder is supplied.

€209.20

In stock 2

36 months warranty

RAM Mounts GDS Powered Locking Vehicle Dock for Honeywell CT37 (in IntelliSkin Protective Sleeve) - USB-C Power Supply - 2-Hole AMPS - GDS Technology

(ramgdsdock-92 – RAM-GDS-DOCKL-V15-CU)

This RAM Mounts GDS holder (key-locking) is compatible for the Honeywell CT37 equipped with the IntelliSkin protective sleeve.
The holder is powered by a USB-C port and charges the device in the dock.
To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.
The spring-loaded design holds the device tightly and securely in the cradle and is also charged.
While the handheld is securely held, the top scanner and the device buttons remain accessible and fully functional.
The interior cavity of the cradle provides space for ergonomic accessories attached to the back of the device.
The back of the device holder is prepared to support a diamond ball base (not included).

Product features RAM Mounts RAM-GDS-DOCKL-V15-CU:
Only compatible with the IntelliSkin protective sleeve
Spring-loaded design for easy insertion and removal
Charging function
Lockable with key
Input Connector: USB-C
Output Voltage: 5-12V @ 3A
Power Output: 15W
Input Cable Length: ca. 38 cm
Weight: ca. 390 g
Additional information:
Devices shown are not included in the delivery.
Only the RAM-GDS-DOCKL-V15-CU holder is supplied.

€210.04

In stock 0

36 months warranty

RAM Mounts 6-Way Desktop Charging Station

(ramdock6g8pu – RAM-DOCK-6G8PU)

RAM Mounts 6-Way Desktop Charging Station for Samsung Tab Active4 Pro / Pro / 3 / 2

€424.33

In stock 3

No warranty

GDS® Genuine USB Type A with DC Cable

(ramgdscab1u – RAM-GDS-CAB-USBA-DC-1U)

The GDS^® Genuine USB Type A with DC Cable (RAM-GDS-CAB-USBA-DC-1U) measures 1.5 meters in length, featuring a USB Type-A male connection and a DC Barrel male connection for use with the GDS^® Ecosystem^™. Always Protected. Always Connected.^®

€11.72

In stock 0

No warranty

RAM Mounts scanner holder

(ram396mag88u – RAP-396-MAG88U)

RAM Mounts scanner holder with magnetic Tough-Mag adapter

€120.97

In stock 0

36 months warranty

Data sheet & more

Offers and indicated delivery times are not binding and only valid for resellers. Prices are in EUR, exclusive of VAT and subject to change. Errors excepted.

* The discount refers to the original sales price.

* The reduced price is only valid for current stock, provided that it is available.