Fully rugged tablet for industry
Fully rugged tablet for industry
€1,229.00
(recommended retail price)- MIL-STD-810H and IP66 rated Android tablet with optional ATEX and IECEx Zone 2/22 certification (ZX10-EX)
- Optional 1D/2D barcode scanner
- 10.1" LumiBond display with multi-touch and Getac sunlight readable technology
- Two swappable 4,990 mAh batteries or two enhanced 9,980 mAh batteries (optional)
- Qualcomm QCS6490 octa-core processor; AI-ready NPU Qualcomm Hexagon processor
Description
Description
The fully rugged Android tablet Getac ZX10 has been specially developed for the high demands in utilities, transport & logistics, warehousing, production and public safety. Its capacitive 10.1" LumiBond display with multi-touch and Getac sunlight readable technology also allows it to be used when wet and with gloves. For a seamless user experience and efficient work processes, the ZX10 relies on the combination of the Qualcomm QCS6490 mobile platform with AI-ready NPU Qualcomm Hexagon processor, Adreno 643 GPU, 8 GB LPDDR5 RAM and 128 GB memory. Continuous operation is ensured by the two hot-swappable 4,990 mAh batteries (optional 9,980 mAh).
High-quality photo and video material is produced by the 8-megapixel front camera and the 16-megapixel rear camera. Wi-Fi 6E, Bluetooth 5.2, optional dedicated GPS, 4G LTE and 5G module ensure quick data transfer and precise location determination, while two SIM card slots allow the quick change between two network operators. Additionally, the ZX10 has been ruggedly designed from the ground up: the MIL-STD-810H and IP66 certifications make it resistant to falls from up to 1.8 m, impacts, rain, vibrations, dust and spilled liquids. The ZX10-EX is even ATEX and IECEx Zone 2/22 certified for use in hazardous areas.
(getzx10-78 – Z2A7IXWI53BX)
€1,518.00
€1,518.00
(getzx10-92 – Z2A7IXWI54BX)
€1,558.00
€1,558.00
(getzx10-97 – Z2A7IXWI5ABX)
€1,229.00
€1,229.00
(getzx10-96 – Z2A7IXWIAABX)
€1,272.00
€1,272.00
(getzx10-80 – Z2A7JXWI5ABC)
€1,532.00
€1,532.00
(getzx10g2-11 – Z8A1HXW858B1)
€1,921.00
This article will be removed from range! Secure the last remainders of stock now!
€1,921.00
(getzx10vedock – 543391900501)
€488.38
€488.38
(getzx10vedock-2 – 543391900502)
€570.08
€570.08
(getzx10vehcrd – 543391900505)
€301.38
€301.38
(getzx10dcase – 590GBL000903)
Ergonomic Hand Strap with integrated easel stand, Always-On suitable for 10" tablet, fits for: ZX10
€94.20
This article will be removed from range! Secure the last remainders of stock now!
€94.20
(get100wapc – GAT1E1)
Power Supply, USB-C, 100W, incl.: Power Cord (EU), fits for: ZX10, UX10G1/G2/G3, A140G2, V110G6/G7, F110G6, S410G3/G4/G5, B360G1/G2, B360G1/G2 pro with default or optional Type-C port, F120G1
€79.00
€79.00
(getzx10stbat – GBM1X1)
€72.00
€72.00
(getzx10hcbat – GBM2X2)
€108.00
€108.00
(getzx10bay8adaeu – GCECEP)
Battery charging station, 8 slots, incl.: power supply, power cord (EU), fits for: ZX10, ZX80
€1,199.00
€1,199.00
(getzx10batch-uk – GCECKP)
Battery cahrging station, 8 slots, incl.: power supply power cord (UK), fits for: ZX10, ZX80
€1,199.00
€1,199.00
(getzx10dbchg – GCMCEM)
Battery cahrging station, 2 slots, incl.: power supply, power cord (EU), fits for: ZX10, ZX80
€317.00
€317.00
(getzx10odock – GDODE8)
Office dock, 1x Audio, 3x USB 2.0, 1x Ethernet, 1x HDMI, 1x RS232, incl.: power supply, power cord (EU), fits for: ZX10
€278.00
€278.00
(getcrnfx5y – GE-SVCRNFX5Y)
Bumper to Bumper Service, Extended Warranty, 5 Years, fits for: ZX10, ZX80
€209.00
€209.00
(getzx10spro – GMPFXS)
Screen Protection Film, fits for: ZX10, V120
€30.00
€30.00
(getzx10styte – GMPSXS)
Stylus, hard tip, incl.: tether, fits for: ZX10
€24.00
€24.00
(jtbindszt – jtbindszt)
Android Zero Touch Registration License for one device
€9.42
€9.42
(getdsu – OSGDX1XXCXXX)
Getac Driving Safety Utility, Hardware-Locked Perpetual License, with 3 Years Maintenance (Per Device)
Available on Windows 10 Pro, Windows 11 Pro, Android 9, 10, 11, and 12 devices. (Android 9,10 for ZX70G2; Android 11,12 for ZX10)€99.00
€99.00
(ramholder14 – RAM-HOL-GE4KLU)
This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX10 rugged tablet.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX10.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-GE4KLU:
Compatible with the Getac tablet accessoires
Not compatible with the Getac hand strap accessory
Easy insertion and removal
Lockable with Keys
Additional mounting plate for attaching additional devices or accessories
Prepared for RAM Vent-Temp, Temp Right or NFC repeater
Additional information:
This holder will not support the Getac hand strap accessory.
Devices shown are not included in the delivery.
Only the RAM-HOL-GE4KLU holder is supplied.
€160.03
€160.03
(ramholder18 – RAM-HOL-GE4PD2KLU)
This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX10 rugged tablet.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX10.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-GE4PD2KLU:
Compatible with the Getac tablet accessoires
Not compatible with the Getac hand strap accessory
Easy insertion and removal
Lockable with key
Additional mounting plate for attaching additional devices or accessories
Prepared for RAM Vent-Temp, Temp Right or NFC repeater
Input Connector: 5.5mm DC-Connector
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Input Voltage: 19V
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: FCC, IC, CE, UKCA, WEEE & RoHS
Additional information:
This holder will not support the Getac hand strap accessory.
Devices shown are not included in the delivery.
Only the RAM-HOL-GE4PD2KLU holder is supplied.
€257.34
€257.34
(ramholder15 – RAM-HOL-GE4PD2U)
This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX10 rugged tablet.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX10.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-GE4PD2U:
Compatible with the Getac tablet accessoires
Not compatible with the Getac hand strap accessory
Easy insertion and removal
With Latch
Additional mounting plate for attaching additional devices or accessories
Prepared for RAM Vent-Temp, Temp Right or NFC repeater
Input Connector: 5.5mm DC-Connector
Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)
Input Voltage: 19V
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: FCC, IC, CE, UKCA, WEEE & RoHS
Additional information:
This holder will not support the Getac hand strap accessory.
Devices shown are not included in the delivery.
Only the RAM-HOL-GE4PD2U holder is supplied.
€223.93
€223.93
(ramholder82 – RAM-HOL-GE4PDKLU)
This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX10 rugged tablet.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX10.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-GE4PDKLU:
Compatible with the Getac tablet accessoires
Not compatible with the Getac hand strap accessory
Easy insertion and removal
Lockable with key
Additional mounting plate for attaching additional devices or accessories
Prepared for RAM Vent-Temp, Temp Right or NFC repeater
Input Connector: 5.5mm DC-Connector
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Input Voltage: 19V
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: FCC, IC, CE, UKCA, WEEE & RoHS
Additional information:
This holder will not support the Getac hand strap accessory.
Devices shown are not included in the delivery.
Only the RAM-HOL-GE4PDKLU holder is supplied.
€228.56
€228.56
(ramholder115 – RAM-HOL-GE4PDU)
This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX10 rugged tablet.
The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX10.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-GE4PDU:
Compatible with the Getac tablet accessoires
Not compatible with the Getac hand strap accessory
Easy insertion and removal
With Latch
Additional mounting plate for attaching additional devices or accessories
Prepared for RAM Vent-Temp, Temp Right or NFC repeater
Input Connector: 5.5mm DC-Connector
Output Connector: USB-A 2.0 (Peripheral output - 500mAh)
Input Voltage: 19V
Input Cable Length: ca. 100 cm
Output Cable Length: ca. 24 cm
Certifications: FCC, IC, CE, UKCA, WEEE & RoHS
Additional information:
This holder will not support the Getac hand strap accessory.
Devices shown are not included in the delivery.
Only the RAM-HOL-GE4PDU holder is supplied.
€206.33
€206.33
(ramholder19 – RAM-HOL-GE4PKLU)
This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX10 rugged tablet.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX10.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-GE4PKLU:
Compatible with the Getac tablet accessoires
Not compatible with the Getac hand strap accessory
Easy insertion and removal
Lockable with key
Additional mounting plate for attaching additional devices or accessories
Prepared for RAM Vent-Temp, Temp Right or NFC repeater
Input Connector: 5.5mm DC-Connector
Input Voltage: 19V
Input Cable Length: ca. 100 cm
Certifications: FCC, IC, CE, UKCA, WEEE & RoHS
Additional information:
This holder will not support the Getac hand strap accessory.
Devices shown are not included in the delivery.
Only the RAM-HOL-GE4PKLU holder is supplied.
€215.46
€215.46
(ramholder55 – RAM-HOL-GE4PU)
This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX10 rugged tablet.
The holder is powered by a 5.5mm DC connection and charges the device in the dock.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX10.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-GE4PU:
Compatible with the Getac tablet accessoires
Not compatible with the Getac hand strap accessory
Easy insertion and removal
With Latch
Additional mounting plate for attaching additional devices or accessories
Prepared for RAM Vent-Temp, Temp Right or NFC repeater
Input Connector: 5.5mm DC-Connector
Input Voltage: 19V
Input Cable Length: ca. 100 cm
Certifications: FCC, IC, CE, UKCA, WEEE & RoHS
Additional information:
This holder will not support the Getac hand strap accessory.
Devices shown are not included in the delivery.
Only the RAM-HOL-GE4PU holder is supplied.
€191.20
€191.20
(ramholder69 – RAM-HOL-GE4U)
This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX10 rugged tablet.
To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.
Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.
The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX10.
An NFC repeater add-on module can be used to extend the device's internal NFC reader.
The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).
Product features RAM Mounts RAM-HOL-GE4U:
Compatible with the Getac tablet accessoires
Not compatible with the Getac hand strap accessory
Easy insertion and removal
With Latch
Additional mounting plate for attaching additional devices or accessories
Prepared for RAM Vent-Temp, Temp Right or NFC repeater
Additional information:
This holder will not support the Getac hand strap accessory.
Devices shown are not included in the delivery.
Only the RAM-HOL-GE4U holder is supplied.
€135.27
€135.27
(ramholze29u – RAM-HOL-ZE29U)
This RAM Mounts Quick-Release holder is suitable for Zebra ZQ511 Series.
This holder is not compatible with the printer accessories for the Zebra ZQ511 series.
The back of the device holder is prepared to support a diamond ball base (not included).
Product features RAM Mounts RAM-HOL-ZE29U:
Quick-Release for easy insertion and removal
Additional information:
Devices shown are not included in the delivery.
Only the RAM-HOL-ZE29U holder is supplied.
€16.32
€16.32
(stageit-l – Stageit-l)
Contact us and book our Staging Premium Service
€60.00
€60.00
(stageit-m – Stageit-m)
Contact us and book our Staging Premium Service
€30.00
€30.00
Data sheet & more
* The discount refers to the original sales price.